ABSTRACT
A map is proposed from the space of planar surface fracture networks to a four-parameter mathematical space, summarizing the average topological connectivity and geometrical properties of a network idealized as a convex polygonal mesh. The four parameters are identified as the average number of nodes and edges, the angular defect with respect to regular polygons, and the isoperimetric ratio. The map serves as a low-dimensional signature of the fracture network and is visually presented as a pair of three-dimensional graphs. A systematic study is made of a wide collection of real crack networks for various materials, collected from different sources. To identify the characteristics of the real materials, several well-known mathematical models of convex polygonal networks are presented and worked out. These geometric models may correspond to different physical fracturing processes. The proposed map is shown to be discriminative, and the points corresponding to materials of similar properties are found to form closely spaced groups in the parameter space. Results for the real and simulated systems are compared in an attempt to identify crack networks of unknown materials.
ABSTRACT
Bacterial biofilms pose the greatest challenge to implant surgeries leading to device-related infections and implant failure. Our present study aims at monitoring the variation in the biofilm architecture of a clinically isolated strain and ATCC 27853 strain of Pseudomonas aeruginosa on two polymeric biomaterials, used in implants. The perspective of our study is to recognize the potential of these two biomaterials to create biofilm infections and develop the understanding regarding their limitations of use and handle patients with this deeper insight. The final goal, however, is an accurate interpretation of substrate-microbe interactions in the two biomaterials, which will provide us the knowledge of possible surface modifications to develop of an efficacious anti-biofilm therapy for deterring implant infections. The reference strain ATCC 27853 and a clinical isolate of P. aeruginosa collected from urinary catheters of patients suffering from urinary tract infections, have been used as microbes while clinical grades of polypropylene and high density polyethylene, have been used as 'substrates' for biofilm growth. The variation in the nature of the 'substrate' and 'conditioning layer' of BSA have been found to affect the biofilm architecture as well as the physiology of the biofilm-forming bacteria, accompanied by an alteration in the nature and volume of EPS (extracellular polysaccharide) matrices.
Subject(s)
Contact Lenses, Extended-Wear/adverse effects , Cornea/pathology , Keratitis/etiology , Adult , Anti-Inflammatory Agents/administration & dosage , Diagnosis, Differential , Female , Follow-Up Studies , Humans , Keratitis/diagnosis , Keratitis/drug therapy , Ophthalmic Solutions , Prednisolone/administration & dosage , Prednisolone/analogs & derivatives , Prednisolone/therapeutic use , Prodrugs , RecurrenceABSTRACT
We report a simulation study on competition between cracking and peeling, in a layer of clay on desiccation and how this is affected by the rate of drying, as well as the roughness of the substrate. The system is based on a simple 2-dimensional spring model. A vertical section through the layer with finite thickness is represented by a rectangular array of nodes connected by linear springs on a square lattice. The effect of reduction of the natural length of the springs, which mimics the drying is studied. Varying the strength of adhesion between sample and substrate and the rate of penetration of the drying front produces an interesting phase diagram, showing cross-over from peeling to cracking behavior. Changes in the number and width of cracks on varying the layer thickness is observed to reproduce experimental reports.
ABSTRACT
The lifting Hele-Shaw cell (LHSC) is used to study adhesion as well as viscous fingering. In the present paper we report a series of observations of development of the interface for different viscous fluids, both Newtonian and non-Newtonian, in a LHSC operated at a constant lifting force. Glass and perspex are used as the plates in two different sets of experiments. The objectives are 1) to measure the time required to separate the plates as a function of the lifting force and 2) to note the force above which viscous fingering appears. We find that for the Newtonian fluids, the plate separation time follows a universal power law with the lifting force, irrespective of fluid and substrate. The non-Newtonian fluids too, with proper scaling obey the same power law. The appearance of fingering, however, depends on the properties of the fluid as well as the substrate. We suggest a modified form of the capillary number which controls the onset of fingering; this new quantity, termed the "fingering parameter" involves the dielectric constants of the substrate and fluid in addition to the viscosity and surface tension.
ABSTRACT
The computation approach to the simulation of electrical conductivity of colloidal dispersions during aggregation is considered. We use the two-dimensional diffusion-limited aggregation model with multiple-seed growth. The particles execute a random walk, but lose their mobility after contact with the growing clusters or seeds. The two parameters that control the aggregation are the initial concentration of free particles in the system p and the concentration of seeds psi. The case of psi=1, when all the particles are the immobile seeds, corresponds with the usual random percolation problem. The other limiting case of psi=0, when all the particles walk randomly, corresponds to the dynamical percolation problem. The calculation of electrical conductivity and cluster analysis were done with the help of the algorithms of Frank-Lobb and Hoshen-Kopelman. It is shown that the percolation concentration phi c decreases from 0.5927 at psi=1 to 0 at psi --> 0. Scaling analysis was applied to study exponents of correlation length v and of conductivity t. For all psi>0 this model shows universal behavior of classical 2d random percolation with v approximately t approximately 4/3. The electrical conductivity sigma of the system increases during aggregation reaching up to a maximum at the final stage. The concentration dependence of conductivity sigma(phi) obeys the general effective medium equation with apparent exponent ta(psi) that exceeds t. The kinetics of electrical conductivity changes during the aggregation is discussed. In the range of concentration Pc(phi)
ABSTRACT
We study condensation and evaporation of particles which repel each other. The system evolves through a computer simulation using a simple set of rules on a square lattice. Different results are obtained for a mobile and an immobile surface layer. A two point limit cycle is observed for high temperature and pressure in both cases. Here the coverage oscillates between a high and a low value without ever reaching a steady state. The results for the immobile case depend in addition on the initial coverage.
ABSTRACT
We study the evolution of an initially random distribution of particles on a square lattice, under certain rules for "growing" and "culling" of particles. In one version we allow the particles to move laterally along the surface (mobile layer) and in the other version this motion is not allowed (immobile case). In the former case, both analytical and computer simulation results are presented, while in the latter only simulation is possible. We introduce growth and culling probabilities appropriate for condensation and evaporation on a two-dimensional surface, and compare results with existing models for this problem. Our results show a very interesting behavior under certain conditions that are quite different from earlier models. We find a possibility of hysteresis not reported earlier for such models.
ABSTRACT
OBJECTIVE: This prospective study was carried out from July-December 1999 to see the status of zinc in CSF of children with febrile convulsion and to compare this to that of control. METHODS: Forty-two cases of febrile convulsion and 30 controls (fever without convulsion) were enrolled into the study. CSF zinc was estimated by atomic absorption spectrophotometry (AAS) in Atomic Energy Center, Dhaka and compared between the two groups. RESULTS: The mean zinc level in CSF in the study sample was 40.19mgm/L and that in control was 74.98mgm/L. This difference was statistically significant (p<0.001). CONCLUSION: The study concludes that a significantly lower of zinc exists in CSF of children with febrile. However no relationship was found between CSF zinc status with age, sex, degree & duration of fever and time of lumbar puncture after convulsion.
Subject(s)
Seizures, Febrile/cerebrospinal fluid , Zinc/cerebrospinal fluid , Age Distribution , Case-Control Studies , Child , Child, Preschool , Female , Humans , Infant , Male , Prospective StudiesABSTRACT
We have studied the percolation behavior of deposits for different (2+1)-dimensional models of surface layer formation. The mixed model of deposition was used, where particles were deposited selectively according to the random (RD) and ballistic (BD) deposition rules. In the mixed one-component models with deposition of only conducting particles, the mean height of the percolation layer (measured in monolayers) grows continuously from 0.898 32 for the pure RD model to 2.605 for the pure BD model, but the percolation transition belongs to the same universality class, as in the two-dimensional (2D) random percolation problem. In two-component models with deposition of conducting and isolating particles, the percolation layer height approaches infinity as concentration of the isolating particles becomes higher than some critical value. The crossover transition from 2D to 3D percolation was observed with increase of the percolation layer height.
ABSTRACT
A model for diffusion on a cubic lattice with a random distribution of traps is developed. The traps are redistributed at certain time intervals. Such models are useful for describing systems showing dynamic disorder, such as ion-conducting polymers. In the present model the traps are infinite, unlike an earlier version with finite traps. For the infinite trap version a simple analytical calculation is possible and the results agree qualitatively with simulations.
Subject(s)
Breast Feeding , Psychology, Adolescent , Social Class , Adolescent , Cognition , Female , Health Education , Humans , India , Infant , Infant, Newborn , Milk, Human , Nutritive ValueABSTRACT
Proton-induced X-ray emission (PIXE) method was employed to study the concentration of heavy elements in betel leaves, betel nuts, and mineral lime consumed in Bangladesh. The samples were collected from different parts of Bangladesh and analyzed by the thicktarget external beam technique of the PIXE method. The samples were exposed to the proton beam as 1-mm thick pellets and irradiated with 2.0-MeV protons having 20-nA beam intensity. The concentration of some 15 elements (K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Se, Br, Rb, Sr, and Pb) was measured by comparison with a calibration curve constructed from the NBS orchard leaf standard SRM 1571. The validity of the procedure has been established by comparative measurements of Cu and Zn with atomic absorption spectrophotometry. The significance of the results is discussed in view of their implications in health and disease.