Photobiomodulation Suppresses Alpha-Synuclein-Induced Toxicity in an AAV-Based Rat Genetic Model of Parkinson's Disease.

Converging lines of evidence indicate that near-infrared light treatment, also known as photobiomodulation (PBM), may exert beneficial effects and protect against cellular toxicity and degeneration in several animal models of human pathologies, including neurodegenerative disorders. In the present study, we report that chronic PMB treatment mitigates dopaminergic loss induced by unilateral overexpression of human α-synuclein (α-syn) in the substantia nigra of an AAV-based rat genetic model of Parkinson's disease (PD). In this model, daily exposure of both sides of the rat's head to 808-nm near-infrared light for 28 consecutive days alleviated α-syn-induced motor impairment, as assessed using the cylinder test. This treatment also significantly reduced dopaminergic neuronal loss in the injected substantia nigra and preserved dopaminergic fibers in the ipsilateral striatum. These beneficial effects were sustained for at least 6 weeks after discontinuing the treatment. Together, our data point to PBM as a possible therapeutic strategy for the treatment of PD and other related synucleinopathies.

Optical properties of rabbit brain in the red and near-infrared: changes observed under in vivo, postmortem, frozen, and formalin-fixated conditions.

The outcome of light-based therapeutic approaches depends on light propagation in biological tissues, which is governed by their optical properties. The objective of this study was to quantify optical properties of brain tissue in vivo and postmortem and assess changes due to tissue handling postmortem. The study was carried out on eight female New Zealand white rabbits. The local fluence rate was measured in the VIS/NIR range in the brain in vivo, just postmortem, and after six weeks' storage of the head at −20°C or in 10% formaldehyde solution. Only minimal changes in the effective attenuation coefficient µeff were observed for two methods of sacrifice, exsanguination or injection of KCl. Under all tissue conditions, µeff decreased with increasing wavelengths. After long-term storage for six weeks at −20°C, µeff decreased, on average, by 15 to 25% at all wavelengths, while it increased by 5 to 15% at all wavelengths after storage in formaldehyde. We demonstrated that µeff was not very sensitive to the method of animal sacrifice, that tissue freezing significantly altered tissue optical properties, and that formalin fixation might affect the tissue's optical properties.)

Assessment of telemetry and fluidic control system used in the Medstream programmable infusion system: an in vivo and in vitro study.

The MedStream Programmable Infusion Pump, an intrathecal pump indicated for the treatment of chronic intractable pain and severe spasticity (CE-mark) or severe spasticity (US), has a highly accurate medication delivery (within 10% of the programmed flow rate) and is certified for use in 3-Tesla magnetic resonance imaging systems (conditional). Performance of the telemetric link between external control-unit and implanted pump was assessed in sheep (in vivo) up to 26 weeks, resulting in 1040 communication sessions. The telemetric communication envelope (communication distance and maximum antenna tilt angles) and communication duration were characterized in an in vitro test. Capacitance measurements of the piezoelectric actuator of the valve, valve flow rates, and leak rates were measured in an in vitro cyclic accelerated aging test to assess reliability of the valve over 6,200 k cycles. The pump was well tolerated in vivo; all communication sessions between control-unit and pump were successful (P = 6.889 × 10(-14)). Mean communication distance between pump and control-unit was 3.8 cm, with the maximum antenna tilt angles being 40° (θy) and 50° (θx) for all test cases; the maximum communication duration was 5.5 s. Capacitance measurements, flow rates, and leak rates were within ±10 % range up to 6,200 k cycles corresponding to approximately 10 times the valve cycles over the specified service life of the pump (8 years), except for one flow-rate value, which can be explained by the measurement setup. These results demonstrate the reliability of the telemetry link and piezoelectric valve system of the MedStream Programmable Infusion Pump.

Near-infrared 808 nm light boosts complex IV-dependent respiration and rescues a Parkinson-related pink1 model.

Mitochondrial electron transport chain (ETC) defects are observed in Parkinson's disease (PD) patients and in PD fly- and mouse-models; however it remains to be tested if acute improvement of ETC function alleviates PD-relevant defects. We tested the hypothesis that 808 nm infrared light that effectively penetrates tissues rescues pink1 mutants. We show that irradiating isolated fly or mouse mitochondria with 808 nm light that is absorbed by ETC-Complex IV acutely improves Complex IV-dependent oxygen consumption and ATP production, a feature that is wavelength-specific. Irradiating Drosophila pink1 mutants using a single dose of 808 nm light results in a rescue of major systemic and mitochondrial defects. Time-course experiments indicate mitochondrial membrane potential defects are rescued prior to mitochondrial morphological defects, also in dopaminergic neurons, suggesting mitochondrial functional defects precede mitochondrial swelling. Thus, our data indicate that improvement of mitochondrial function using infrared light stimulation is a viable strategy to alleviate pink1-related defects.

Development and in-vitro characterization of an implantable flow sensing transducer for hydrocephalus.

An implantable transducer for monitoring the flow of Cerebrospinal fluid (CSF) for the treatment of hydrocephalus has been developed which is based on measuring the heat dissipation of a local thermal source. The transducer uses passive telemetry at 13.56 MHz for power supply and read out of the measured flow rate. The in vitro performance of the transducer has been characterized using artificial Cerebrospinal Fluid (CSF) with increased protein concentration and artificial CSF with 10% fresh blood. After fresh blood was added to the artificial CSF a reduction of flow rate has been observed in case that the sensitive surface of the flow sensor is close to the sedimented erythrocytes. An increase of flow rate has been observed in case that the sensitive surface is in contact with the remaining plasma/artificial CSF mix above the sediment which can be explained by an asymmetric flow profile caused by the sedimentation of erythrocytes having increased viscosity compared to artificial CSF. After removal of blood from artificial CSF, no drift could be observed in the transducer measurement which could be associated to a deposition of proteins at the sensitive surface walls of the packaged flow transducer. The flow sensor specification requirement of +-10% for a flow range between 2 ml/h and 40 ml/h. could be confirmed at test conditions of 37 degrees C.

A telemetric pressure sensor system for biomedical applications.

A new implantable pressure sensor for long-term monitoring of intracranial pressure is presented. The sensor is powered by telemetry and can be interrogated wirelessly. A capacitive pressure transducer, whose capacitance is converted to a frequency-encoded signal by an application-specific integrated circuit (ASIC), senses the absolute pressure. The pressure-encoded signal, the ASIC input voltage, and onboard calibration parameters are transmitted to an external reading unit. The proposed novel packaging solution is designed for long-term stability and reliability of the sensor. The accuracy of sensor at body temperature is better than 2 mbar across a pressure range of 600-1200 mbar. The sensor is 13 mm in diameter and 4.5 mm in height.

Development of an implantable infusion pump for sustained anti-HIV drug administration.

Factors such as insufficient drug potency, non-compliance and restricted tissue penetration contribute to incomplete suppression of Human Immunodeficiency Virus (HIV) and the difficulty to control this infection. Infusion via standard catheters can be a source of infection, which is potentially life threatening in these patients. We developed an implantable infusion pump, allowing to accommodate large volumes (16-50mL) of high viscous solutions (up to 23.96mPas at 39 degrees C) of anti-HIV agents and providing sustained release of medication: a standard Codman 3000 pump, which was initially developed to release aqueous solutions ( approximately 0.7mPas) into the spinal cord such as for pain medication, was transformed for release of viscous solutions up to 40mPas by adapting the diameter of the capillary flow restrictor, the capillary length and way of catheterisation--by placing the indwelling catheter in the vena cava. A pilot study of the pump implanted in 2 dogs showed continuous steady-state release of the protease inhibitor darunavir (25mg/dog/day administered for 25 days), thereby achieving plasma concentration levels of approximately 40ng/mL. Steady-state plasma levels were reproducible after monthly refill of the pumps. In conclusion, the implantable adapted Codman 3000 constant-flow infusion pump customized to anti-HIV therapy allows sustained release of anti-HIV medication and may represent an opportunity to reduce the pill burden and complexity of dosing schemes associated with common anti-HIV therapy.

Safety of active implantable devices during MRI examinations: a finite element analysis of an implantable pump.

The goal of this study was to propose a general numerical analysis methodology to evaluate the magnetic resonance imaging (MRI)-safety of active implants. Numerical models based on the finite element (FE) technique were used to estimate if the normal operation of an active device was altered during MRI imaging. An active implanted pump was chosen to illustrate the method. A set of controlled experiments were proposed and performed to validate the numerical model. The calculated induced voltages in the important electronic components of the device showed dependence with the MRI field strength. For the MRI radiofrequency fields, significant induced voltages of up to 20 V were calculated for a 0.3T field-strength MRI. For the 1.5 and 3.0OT MRIs, the calculated voltages were insignificant. On the other hand, induced voltages up to 11 V were calculated in the critical electronic components for the 3.0T MRI due to the gradient fields. Values obtained in this work reflect to the worst case situation which is virtually impossible to achieve in normal scanning situations. Since the calculated voltages may be removed by appropriate protection circuits, no critical problems affecting the normal operation of the pump were identified. This study showed that the proposed methodology helps the identification of the possible incompatibilities between active implants and MR imaging, and can be used to aid the design of critical electronic systems to ensure MRI-safety.

Contribution of the nucleus to the mechanical properties of endothelial cells.

The cell nucleus plays a central role in the response of the endothelium to mechanical forces, possibly by deforming during cellular adaptation. The goal of this work was to precisely quantify the mechanical properties of the nucleus. Individual endothelial cells were subjected to compression between glass microplates. This technique allows measurement of the uniaxial force applied to the cell and the resulting deformation. Measurements were made on round and spread cells to rule out the influence of cell morphology on the nucleus mechanical properties. Tests were also carried out with nuclei isolated from cell cultures by a chemical treatment. The non-linear force-deformation curves indicate that round cells deform at lower forces than spread cells and nuclei. Finite-element models were also built with geometries adapted to actual morphometric measurements of round cells, spread cells and isolated nuclei. The nucleus and the cytoplasm were modeled as separate homogeneous hyperelastic materials. The models simulate the compression and yield the force-deformation curve for a given set of elastic moduli. These parameters are varied to obtain a best fit between the theoretical and experimental data. The elastic modulus of the cytoplasm is found to be on the order of 500N/m(2) for spread and round cells. The elastic modulus of the endothelial nucleus is on the order of 5000N/m(2) for nuclei in the cell and on the order of 8000N/m(2) for isolated nuclei. These results represent an unambiguous measurement of the nucleus mechanical properties and will be important in understanding how cells perceive mechanical forces and respond to them.