Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters










Database
Language
Publication year range
1.
Environ Technol ; 40(5): 625-632, 2019 Feb.
Article in English | MEDLINE | ID: mdl-29098952

ABSTRACT

Peroxidase from Brassica rapa was immobilized as cross-linked enzyme aggregates (CLEAs) and used to treat air containing phenol as a model molecule of volatile organic compounds (VOCs). Prior to an enzymatic treatment, phenol was absorbed into an aqueous or organic phase (silicone oil) to reach concentrations ranging from 20 to 160 mg/L. The process was carried out by introducing a desired weighing of BRP-CLEAs into preparations and reaction was started by injecting H2O2 solution to the medium. Optimization of the reaction conditions in the organic solvent revealed an optimal contact time of 60 min, 60 mg/L of phenol concentration and 3 mM H2O2, leading to a maximum removal yield of 70% for 3.4 UI/mL of BRP-CLEAs. These results were compared to those obtained in an aqueous medium that showed 90% of degradation yield after 40 min in the following conditions, 90 mg/L of initial phenol amount, 2 mM of H2O2 and 2.5 UI/mL of BRP-CLEAs. Parameters of the Michaelis-Menten model, Km and Vmax, were also determined for the reaction in both phases. Phenol removal by BRP-CLEAs in silicone oil succeeded with 70% of conversion yield. It is promising regarding the transposition of such enzymatic process to hydrophobic VOCs.


Subject(s)
Phenol , Volatile Organic Compounds , Biodegradation, Environmental , Hydrogen Peroxide , Phenols
2.
Chemosphere ; 148: 55-60, 2016 Apr.
Article in English | MEDLINE | ID: mdl-26802263

ABSTRACT

This study proposes a new technique to treat waste air containing 2-Chlorophenol (2-CP), namely an integrated process coupling absorption of the compound in an organic liquid phase and its enzymatic degradation. Silicone oil (47V20) was used as an organic absorbent to allow the volatile organic compound (VOC) transfer from the gas phase to the liquid phase followed by its degradation by means of Cross-linked Brassica rapa peroxidase (BRP) contained in the organic phase. An evaluation of silicone oil (47V20) absorption capacity towards 2-CP was first accomplished by determining its partition coefficient (H) in this solvent. The air-oil partition coefficient of 2-CP was found equal to 0.136 Pa m(3) mol(-1), which is five times lower than the air-water value (0.619 Pam(3) mol(-1)). The absorbed 2-CP was then subject to enzymatic degradation by cross-linked BRP aggregates (BRP-CLEAs). The degradation step was affected by four parameters (contact time; 2-CP, hydrogen peroxide and enzyme concentrations), which were optimized in order to obtain the highest conversion yield. A maximal conversion yield of 69% and a rate of 1.58 mg L(-1) min(-1)were obtained for 100 min duration time when 2-CP and hydrogen peroxide concentrations were respectively 80 mg L(-1) and 6 mM in the presence of 2.66 UI mL(-1) BRP-CLEAs. The reusability of BRP-CLEAs in silicone oil was assessed, showing promising results since 59% of their initial efficiency remained after three batches.


Subject(s)
Air Pollutants/isolation & purification , Brassica rapa/enzymology , Chlorophenols/isolation & purification , Peroxidase/chemistry , Silicone Oils/chemistry , Volatile Organic Compounds/isolation & purification , Adsorption , Catalysis , Cross-Linking Reagents/chemistry , Glutaral/chemistry , Hydrogen Peroxide/chemistry
3.
J Hazard Mater ; 183(1-3): 35-43, 2010 Nov 15.
Article in English | MEDLINE | ID: mdl-20674173

ABSTRACT

This work focused on kinetic, equilibrium and thermodynamic studies on aluminum biosorption by Streptomyces rimosus biomass. Infrared spectroscopy analysis shows that S. rimosus present some groups: hydroxyl, methyl, carboxyl, amine, thiol and phosphate. The maximum biosorption capacity of S. rimosus biomass was found to be 11.76 mg g(-1) for the following optimum conditions: particle size, [250-560] µm, pH 4-4.25, biomass content of 25 g L(-1), agitation of 250 rpm and temperature of 25 °C. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherms at free pH (pH(i) 4) and fixed pH (pH(f) 4). Langmuir model is the most adequate. With fixed pH, the maximum biosorption capacity is enhanced from 6.62 mg g(-1) to 11.76 mg g(-1). The thermodynamic parameters (ΔG°, ΔH° and ΔS°) showed the feasibility, endothermic and spontaneous nature of the biosorption at 10-80 °C. The activation energy (Ea) was determined as 52.18 kJ mol(-1) using the Arrhenius equation and the rate constant of pseudo-second-order model (the most adequate kinetic model). The mean free energy was calculated as 12.91 kJ mol(-1) using the D-R isotherm model. The mechanism of Al(III) biosorption on S. rimosus could be a chemical ion exchange and carboxyl groups are mainly involved in this mechanism.


Subject(s)
Aluminum/isolation & purification , Biodegradation, Environmental , Streptomyces/metabolism , Thermodynamics , Adsorption , Biomass , Hydrogen-Ion Concentration , Kinetics , Static Electricity , Water Pollutants, Chemical/isolation & purification
SELECTION OF CITATIONS
SEARCH DETAIL
...