Effect of mutations of N- and C-terminal charged residues on the activity of LCAT.

On the basis of structural homology calculations, we previously showed that lecithin:cholesterol acyltransferase (LCAT), like lipases, belongs to the alpha/beta hydrolase fold family. As there is higher sequence conservation in the N-terminal region of LCAT, we investigated the contribution of the N- and C-terminal conserved basic residues to the catalytic activity of this enzyme. Most basic, and some acidic residues, conserved among LCAT proteins from different species, were mutated in the N-terminal (residues 1;-210) and C-terminal (residues 211;-416) regions of LCAT. Measurements of LCAT-specific activity on a monomeric substrate, on low density lipoprotein (LDL), and on reconstituted high density lipoprotein (rHDL) showed that mutations of N-terminal conserved basic residues affect LCAT activity more than those in the C-terminal region. This agrees with the highest conservation of the alpha/beta hydrolase fold and structural homology with pancreatic lipase observed for the N-terminal region, and with the location of most of the natural mutants reported for human LCAT. The structural homology between LCAT and pancreatic lipase further suggests that residues R80, R147, and D145 of LCAT might correspond to residues R37, K107, and D105 of pancreatic lipase, which form the salt bridges D105-K107 and D105-R37. Natural and engineered mutations at residues R80, D145, and R147 of LCAT are accompanied by a substantial decrease or loss of activity, suggesting that salt bridges between these residues might contribute to the structural stability of the enzyme.

Headgroup specificity of lecithin cholesterol acyltransferase for monomeric and vesicular phospholipids.

In this study, we investigated how the nature of the phospholipid head group and the macromolecular structure of the phospholipid, either as a monomer or incorporated into a lipid matrix, influence the activity of lecithin cholesterol acyltransferase (LCAT). As substrates we used 1,2-bis-(1-pyrenebutanoyl)-phosphatidylcholine, 1, 2-bis-(1-pyrenebutanoyl)-phosphatidylethanolamine and 1, 2-bis-(1-pyrenebutanoyl)-phosphatidyl-alcohols, either as monomers or incorporated into small unilamellar vesicles consisting of dipalmitoylphosphatidylcholine ether. The rate of hydrolysis of the pyrene-labeled phospholipids was determined both by fluorescence and by high performance liquid chromatography. V(max) and K(m) were calculated for the different substrates. The data show that V(max) is 10- to 30-fold higher for the hydrolysis of monomeric phosphatidylcholine (PC) compared to phosphatidylethanolamine (PE) and the phosphatidylalcohols, while K(m) values are comparable. When the fluorescent substrates were incorporated into dipalmitoylphosphatidylcholine ether vesicles, we observed a 4- to 10-fold increase of V(max) for PE and the phosphatidylalcohols, and no significant change for K(m). V(max) for PC remained the same. Natural LCAT mutants causing Fish-Eye Disease (FED) and analogues of these mutants expressed in Cos-1 cells, had similar activity on monomeric PC and PE. These data suggest that the activity of LCAT is determined both by the molecular structure of the phospholipid and by its macromolecular properties. The LCAT activity on monomeric substrates decreases as: phosphatidylcholine&z. Gt;phosphatidylethanolamine congruent withphosphatidylpropanol congruent withphosphatidylethanol congruent withphosphatidylethyleneglycol. The incorporation of PE and the phosphatidylalcohols into a matrix of dipalmitoylphosphatidylcholine decreases the specificity of the phospholipid head group.

Relationship between structure and biochemical phenotype of lecithin:cholesterol acyltransferase (LCAT) mutants causing fish-eye disease.

In order to test the hypothesis that fish-eye disease (FED) is due to a deficient activation of lecithin:cholesterol acyltransferase (LCAT) by its co-factor apolipoprotein (apo) A-I, we overexpressed the natural mutants T123I, N131D, N391S, and other engineered mutants in Cos-1 cells. Esterase activity was measured on a monomeric phospholipid enelogue, phospholipase A(2) activity was measured on reconstituted high density lipoprotein (HDL), and acyltransferase activity was measured both on rHDL and on low density lipoprotein (LDL). The natural FED mutants have decreased phospholipase A(2) activity on rHDL, which accounts for the decreased acyltransferase activity previously reported. All mutants engineered at positions 131 and 391 had decreased esterase activity on a monomeric substrate and decreased acyltransferase activity on LDL. In contrast, mutations at position 123 preserved these activities and specifically decreased phospholipase A(2) and acyltransferase activites on rHDL. Mutations of hydrophilic residues in amphipathic helices alpha 3;-4 and alpha His to an alanine did not affect the mutants' activity on rHDL. Based upon the 3D model built for human LCAT, we designed a new mutant F382A, which had a biochemical phenotype similar to the natural T123I FED mutant. These data suggest that residues T123 and F382, located N-terminal of helices alpha 3-4 and alpha His, contribute specifically to the interaction of LCAT with HDL and possibly with its co-factor apoA-I. Residues N131 and N391 seem critical for the optimal orientation of the two amphipathic helices necessary for the recognition of a lipoprotein substrate by the enzyme.

Structural organization of lipid phase and protein-lipid interface in apolipoprotein-phospholipid recombinants: influence of cholesterol.

The complexes of individual human plasma apolipoproteins (apo) A-I, E and A-II with dipalmitoylphosphatidylcholine (DPPC) in the absence or in the presence of cholesterol (Chol) were prepared with initial DPPC/Chol/protein weight ratio as 3:0.15:1. ApoA-I/DPPC/Chol complexes with different protein content (initial DPPC/apoA-I weight ratios were changed from 10.5:1 to 2.6:1) but with a fixed initial DPPC/Chol weight ratio of 20:1 were also prepared. The complexes were isolated by gel-filtration and characterized by size and composition. ApoA-I- and apoA-II-complexes had the same size (80-84 A) and the complexes became more heterogeneous upon Chol inclusion; apoE-complexes were larger (97-100 A) and more homogeneous and Chol addition had no effect on their hydrodynamic properties. Chol seems to be excluded partially in the following manner for isolated complexes with different apo's: A-II > E > A-I. The possible existence of two lipid regions in the complexes differing in lipid dynamics - the lipid shell in the vicinity of apolipoprotein (boundary lipid) opposite to the remaining part of the lipid bilayer - has been studied by absorbance and fluorescence spectroscopy with cis-parinaric acid (cis-PA) and trans-parinaric acid (trans-PA) embedded into the complexes. Their application is based on a strong preference of trans-PA for solid lipid while cis-PA distributes more equally between co-existing fluid and solid lipid regions (Sklar et al. (1979) Biochemistry 18, 1707-1716). (1) For apoA-I-complexes, the partition of cis-PA between water and lipid phase at temperatures below and above the transition temperature of DPPC (T(t)) was insensitive to Chol and temperature, while partition of trans-PA into the lipid phase of Chol-containing complex was increased at high temperature and decreased at low temperature. These results seem to be related to trans-PA redistribution between Chol-rich and protein-rich lipid domains, the latter being more disordered at T < T(t) and more immobilized at T > T(t) compared to the bulk bilayer; cis-PA localizes preferentially in boundary lipid. This hypothesis was directly confirmed by measurements of energy transfer between apoA-I tryptophanyls and probe molecules. (2) The relative response of trans-PA fluorescence intensity to temperature-induced phase transition of DPPC in apoA-I/DPPC/Chol complexes was decreased as a function of apolipoprotein content in a non-monotonic fashion with a transition midpoint at a mol ratio DPPC/A-I of 250:1, probably indicating two different modes of apolipoprotein/DPPC interaction in different sized complexes. (3) The comparative study of lipid dynamics in apoA-I-, apoE- and apoA-II-containing complexes with temperature response to phospholipid phase transition with fluorescence parameters such as intensity and anisotropy of cis-PA and trans-PA revealed the presence of boundary lipid in all three complexes without Chol. In contrast to apoA-I-containing complexes, in apoA-II/DPPC/Chol complexes, trans-PA seems to move preferentially into boundary lipid and cis-PA to distribute between two different regions probably as a result of more ordering action induced by apoA-II compared to apoA-I on the nearest phospholipid molecules in Chol-containing complexes; the apoE action on trans-PA and cis-PA distribution could be intermediate. Based on these results, the degree of Chol exclusion from the boundary lipid region for complexes with different apo's increasing in the order A-II > E > A-I can be suggested. Different Chol distributions between two lipid regions in the complexes seems not to be a function of complex size, but rather is an inherent property of the particular apolipoprotein molecule.

Phospholipid binding and lecithin-cholesterol acyltransferase activation properties of apolipoprotein A-I mutants.

Recombinant human apolipoprotein A-I (apo A-I) and three deletion mutants: apo A-I(delta Leu44-Leu126), apo A-I(delta Glu139-Leu170), and apo A-I(delta Ala190-Gln243), purified from the periplasmic space of Escherichia coli, were studied. The rate of turbidity decrease following mixing of apo A-I(delta Ala190-Gln243) with dimyristoylphosphatidylcholine (DMPC) vesicles at 23 degrees C was 10-fold lower than that of the other apo A-I proteins, confirming that the carboxy-terminal region of apo A-I plays a role in rapid lipid binding. The Stokes radii of reconstituted high-density lipoproteins (rHDL), containing dipalmitoylphosphatidylcholine and cholesterol, were larger for the three apo A-I mutants [6.3 nm for apo A-I(delta Leu44-Leu126), 6.1 nm for apo A-I(delta Glu139-Leu170), and 6.5 nm for apo A-I(delta Ala190-Gln243)] than for intact apo A-I (5.0 nm). The mutant rHDL all contained 4 apo A-I molecules per particle as compared to 2 for intact apo A-I. Circular dichroism measurements revealed 8 alpha-helices per apo A-I molecule, 5 per apo A-I(delta Leu44-Leu126), 6 per apo A-I(delta Glu139-Leu170), and 4 per apo A-I(delta Ala190-Gln243) molecule as compared to predicted values of 8, 5, 6, and 6 alpha-helices, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)

Synthetic model peptides for apolipoproteins. I. Design and properties of synthetic model peptides for the amphipathic helices of the plasma apolipoproteins.

Amphipathic helical peptides are the lipid-binding motives of the plasma apolipoproteins, and synthetic peptide analogs have been used to unravel the mechanism of lipid association within this class of proteins. Hydrophobic interactions between the apolar amino acid residues belonging to the hydrophobic face of the amphipathic helices and the lipids are the major driving forces in the peptide-lipid association to form discoidal complexes. Ionic interactions and salt bridge formation between contiguous peptide chains in the complex can, however, contribute to the overall stability of the lipid-protein particle. This was studied by designing peptide analogs to the helical repeats of the apolipoproteins with variable degrees of salt bridge formation between adjacent peptide chains. The most stable conformation for pairs of synthetic peptides was calculated by energy minimisation together with the energy of interaction between peptides. The sequence of the peptides was derived from that of the 18A peptide synthesized by Segrest et al., and the theoretical calculations confirmed that ionic interactions between residues close to each other, along the edge of two adjacent anti-parallel peptides, can significantly contribute towards the stability of a peptide-phospholipid complex.

LCAT activation properties of apo A-I CNBr fragments and conversion of discoidal complexes into spherical particles.

We studied the substrate properties of the phospholipid-cholesterol-apolipoprotein complexes generated with apo A-I, apo A-I-CNBr fragments, apo A-II and apo A-IV for cholesterol esterification by the enzyme lecithin-cholesterol acyltransferase (LCAT). The kinetic parameters determined with the different complexes as substrates, showed that the complexes containing apo A-I and apo A-IV were about 40-times more efficient than those generated with the apo A-I fragments. In this system, the substrates containing apo A-II had the lowest efficiency. In spite of the differences in the kinetic parameters observed with the various apolipoprotein-lipid complexes, the cholesterol inserted in the complexes was esterified for more than 90% after 24 h in all systems studied. Based upon the results of the kinetic experiments, we followed the transformation of the discoidal complexes into spherical particles, due to the formation of a cholesteryl esters core, in the presence of low-density lipoproteins as an external source of cholesterol. We observed the formation of spherical particles by electron microscopy, after incubation of the discoidal complexes with LCAT for 24 h. The average percentage of cholesteryl esters in the converted particles was around 60% of the total cholesterol, varying between 40% for the apo A-I-CNBr-1-DPPC-cholesterol complex and up to 86% for the apo A-I-DPPC-cholesterol complex. The secondary structure of protein in the complexes was not significantly modified. However, the phospholipid phase transition disappeared, together with the parallel orientation of the phospholipid acyl chains with the helical segments of the apolipoproteins, as the phospholipids are organized in a monolayer at the surface of the spheres.