Magnetic anisotropy engineering in onion-structured metal oxide nanoparticles combining dual exchange coupling and proximity effects.

A series of exchange-coupled magnetic nanoparticles combining several magnetic phases in an onion-type structure were synthesized by performing a three-step seed-mediated growth process. Iron and cobalt precursors were alternatively decomposed in high-boiling-temperature solvents (288-310 °C) to successively grow CoO and Fe3-δO4 shells (the latter in three stages) on the surface of Fe3-δO4 seeds. The structure and chemical composition of these nanoparticles were investigated in depth by combining a wide panel of advanced techniques, such as scanning transmission electron microscopy (STEM), electron energy-loss spectroscopy-spectrum imaging (EELS-SI), 57Fe Mössbauer spectrometry, and X-ray circular magnetic dichroism (XMCD) techniques. The size of the nanoparticles increased progressively after each thermal decomposition step, but the crystal structure of core-shell nanoparticles was significantly modified during the growth of the second shell. Indeed, the antiferromagnetic CoO phase was progressively replaced by the CoFe2O4 ferrimagnet due to the concomitant processes of partial solubilization/crystallization and the interfacial cationic diffusion of iron. A much more complex chemical structure than that suggested by a simple size variation of the nanoparticles is thus proposed, namely Fe3-δO4@CoO-CoFe2O4@Fe3-δO4, where an intermediate Co-based layer was shown to progressively become a single, hybrid magnetic phase (attributed to proximity effects) with a reduction in the CoO amount. In turn, the dual exchange-coupling of this hybrid Co-based intermediate layer (with high anisotropy and ordering temperature) with the surrounding ferrite (core and outer shells) stabilized the particle moment well above room temperature. These effects allow for the production of Fe oxide-based magnetic nanoparticles with high effective anisotropy, thus revealing the potential of this strategy to design rare-earth-free permanent nanomagnets at room temperature.

Interaction between carbon dots from folic acid and their cellular receptor: a qualitative physicochemical approach.

According to the World Health Organization, the number of cancers (all cancers, both sexes, all ages and worldwide) in 2020 reached a total of 19 292 789 new cases leading to 9 958 133 deaths during the same period. Many cancers could be cured if detected early. Preventing cancer and detecting it early are two essential strategies for controlling this pathology. For this purpose, several strategies have been described for imaging cancer cells. One of them is based on the use of carbon nanoparticles called carbon dots, tools of physical chemistry. The literature describes that cancer cells can be imaged using carbon dots obtained from folic acid and that the in cellulo observed photoluminescence probably results from the interaction of these nanoparticles with the folic acid-receptor, a cell surface protein overexpressed in many malignant cells. However, this interaction has never been directly demonstrated yet. We investigated it, for the first time, using (i) freshly synthesized and fully characterized carbon dots, (ii) folate binding protein, a folic acid-receptor model protein and (iii) fluorescence spectroscopy and isothermal titration calorimetry, two powerful methods for detecting molecular interactions. Our results even highlight a selective interaction between these carbon made nano-objects and their biological target.

Molecular Inhibition for Selective CO2 Conversion.

Electrochemical CO2 reduction presents a sustainable route to the production of chemicals and fuels. Achieving a narrow product distribution with heterogeneous Cu catalysts is challenging and conventional material modifications offer limited control over selectivity. Here, we show that surface-immobilised molecular species can act as inhibitors for specific carbon products to provide rational control over product distributions. Combined experimental and computational results showed that anchoring of a thiol-functionalised pyridine on Cu destabilises a surface-bound reaction intermediate to energetically block a CO-producing pathway, thereby favouring formate production. The nitrogen atom was shown to be essential to the inhibition mechanism. The ability of molecules to control selectivity through inhibition of specific reaction pathways offers a unique approach to rationally modify heterogeneous catalysts.

Bad neighbour, good neighbour: how magnetic dipole interactions between soft and hard ferrimagnetic nanoparticles affect macroscopic magnetic properties in ferrofluids.

Fluids responding to magnetic fields (ferrofluids) offer a scene with no equivalent in nature to explore long-range magnetic dipole interactions. Here, we studied the very original class of binary ferrofluids, embedding soft and hard ferrimagnetic nanoparticles. We used a combination of X-ray magnetic spectroscopy measurements supported by multi-scale experimental techniques and Monte-Carlo simulations to unveil the origin of the emergent macroscopic magnetic properties of the binary mixture. We found that the association of soft and hard magnetic nanoparticles in the fluid has a considerable influence on their inherent magnetic properties. While the ferrofluid remains in a single phase, magnetic interactions at the nanoscale between both types of particles induce a modification of their respective coercive fields. By connecting the microscopic properties of binary ferrofluids containing small particles, our findings lay the groundwork for the manipulation of magnetic interactions between particles at the nanometer scale in magnetic liquids.

Carbon-Nanotube-Supported Copper Polyphthalocyanine for Efficient and Selective Electrocatalytic CO2 Reduction to CO.

Electroreduction of CO2 to CO is one of the simplest ways to valorise CO2 as a source of carbon. Herein, a cheap, robust, Cu-based hybrid catalyst consisting of a polymer of Cu phthalocyanine coated on carbon nanotubes, which proved to be selective for CO production (80 % faradaic yield) at relatively low overpotentials, was developed. Polymerisation of Cu phthalocyanine was shown to have a drastic effect on the selectivity of the reaction because molecular Cu phthalocyanine was instead selective for proton reduction under the same conditions. Although the material only showed isolated Cu sites in phthalocyanine-like CuN4 coordination, in situ and operando X-ray absorption spectroscopy showed that, under operating conditions, the Cu atoms were fully converted to Cu nanoparticles, which were likely the catalytically active species. Interestingly, this restructuring of the metal sites was reversible.

Electroreduction of CO2 on Single-Site Copper-Nitrogen-Doped Carbon Material: Selective Formation of Ethanol and Reversible Restructuration of the Metal Sites.

It is generally believed that CO2 electroreduction to multi-carbon products such as ethanol or ethylene may be catalyzed with significant yield only on metallic copper surfaces, implying large ensembles of copper atoms. Here, we report on an inexpensive Cu-N-C material prepared via a simple pyrolytic route that exclusively feature single copper atoms with a CuN4 coordination environment, atomically dispersed in a nitrogen-doped conductive carbon matrix. This material achieves aqueous CO2 electroreduction to ethanol at a Faradaic yield of 55 % under optimized conditions (electrolyte: 0.1 m CsHCO3 , potential: -1.2 V vs. RHE and gas-phase recycling set up), as well as CO electroreduction to C2 -products (ethanol and ethylene) with a Faradaic yield of 80 %. During electrolysis the isolated sites transiently convert into metallic copper nanoparticles, as shown by operando XAS analysis, which are likely to be the catalytically active species. Remarkably, this process is reversible and the initial material is recovered intact after electrolysis.

Room Temperature Blocked Magnetic Nanoparticles Based on Ferrite Promoted by a Three-Step Thermal Decomposition Process.

Exchange coupled nanoparticles that combine hard and soft magnetic phases are very promising to enhance the effective magnetic anisotropy while preserving sizes below 20 nm. However, the core-shell structure is usually insufficient to produce rare earth-free ferro(i)magnetic blocked nanoparticles at room temperature. We report on onion-type magnetic nanoparticles prepared by a three-step seed mediated growth based on the thermal decomposition method. The core@shell@shell structure consists of a core and an external shell of Fe3-δO4 separated by an intermediate Co-doped ferrite shell. The double exchange coupling at both core@shell and shell@shell interfaces results in such an increased of the magnetic anisotropy energy, that onion-type nanoparticles of 16 nm mainly based on iron oxide are blocked at room temperature. We envision that these results are very appealing for potential applications based on permanent magnets.

Zn-Cu Alloy Nanofoams as Efficient Catalysts for the Reduction of CO2 to Syngas Mixtures with a Potential-Independent H2 /CO Ratio.

Alloying strategies are commonly used to design electrocatalysts that take on properties of their constituent elements. Herein, such a strategy is used to develop Zn-Cu alloyed electrodes with unique hierarchical porosity and tunable selectivity for CO2 versus H+ reduction. By varying the Zn/Cu ratio, tailored syngas mixtures are obtained without the production of other gaseous products, which is attributed to preferential CO- and H2 -forming pathways on the alloys. The syngas ratios are also significantly less sensitive to the applied potential in the alloys relative to pure metal equivalents; an essential quality when coupling electrocatalysis with renewable power sources that have fluctuating intensity. As such, industrially relevant syngas ratios are achieved at large currents (-60 mA) for extensive operating times (>9 h), demonstrating the potential of this strategy for fossil-free fuel production.

High-Pressure Control of Vanadium Self-Intercalation and Enhanced Metallic Properties in 1T-V1+xS2 Single Crystals.

By means of high-pressure synthesis in the 4-6 GPa range, we report on the successful growth of high-quality 1T-V1+xS2 single crystals with controlled concentration, x = 0.09-0.17, of self-intercalated V atoms in the van der Waals gap. A systematic X-ray diffraction and energy-dispersive X-ray spectroscopy study unveils a linear decrease of x with the synthesis pressure, dx/dP = -0.042 GPa(-1), suggesting that the stoichiometric (x = 0) phase is stable above 8 GPa. Transmission electron microscopy and electrical resistivity measurements show that, for all x values studied, the system is metallic up to 400 K, with no charge-density-wave order, contrary to the x = 0 composition. This finding clarifies the controversial electronic phase diagram of the 1T-V1+xS2 system and unveils a connection between the charge-density-wave phase observed at x = 0 and the itinerant antiferromagnetic phase stable for x > 0.25.

Synthesis of Trimagnetic Multishell MnFe2 O4 @CoFe2 O4 @NiFe2 O4 Nanoparticles.

The synthesis and characterization of original ferrite multishell magnetic nanoparticles made of a soft core (manganese ferrite) covered with two successive shells, a hard one (cobalt ferrite) and then a soft one (nickel ferrite), are described. The results demonstrate the modulation of the coercivity when new magnetic shells are added.

Optical gap measurements on individual boron nitride nanotubes by electron energy loss spectroscopy.

Electromagnetic response of individual boron nitride nanotubes (BNNTs) has been studied by spatially resolved electron energy loss spectroscopy (EELS). We demonstrate how dedicated EELS methods using subnanometer electron probes permit the analysis of local dielectric properties of a material on a nanometer scale. The continuum dielectric model has been used to analyze the low-loss EEL spectra recorded from these tubes. Using this model, we demonstrate the weak influence of the out-of-plane contribution to the dielectric response of BNNTs. The optical gap, which can be deduced from the measurements, is found to be equal to 5.8 +/- 0.2 eV, which is close to that of the hexagonal boron nitride. This value is found to be independent of the nanotubes configuration (diameter, helicity, number of walls, and interaction between the different walls).