Hydrochemical Characterization, Geothermometry, and Origin of Ain Al-Harrah Hot Spring and Its Relationship to Al-Lith Geothermal System, Saudi Arabia.

The Al-Lith geothermal field in western Saudi Arabia is a characteristic medium-high enthalpy geothermal system, exhibiting features associated with tectonic activities linked to the Red Sea rifting. Ain Al-Harrah hot spring is located in the Al-Lith field, with discharge temperatures varying from 56 to 81 °C. The determination of water temperature and composition in a geothermal reservoir is critical to the design of utilization strategies, surface production facilities, and choice of materials. This research presents a comprehensive hydrochemical characterization of the Ain Al-Harrah hot spring and its relationship with the underlying geothermal system. This study was conducted in two main phases; first, the fieldwork involved the collection of water samples from the hot spring, measuring the temperature, pH, and electrical conductivity (EC) of the water. The second phase involved laboratory analyses of the collected samples, including major and trace element analyses, isotopic analysis, and geothermometry. The dominant hydrogeochemical processes in the region were determined by analyzing the hydrochemistry of the water samples. Thermal waters analyzed exhibited high concentrations of Na+ (410-463 mg/L), HCO3 - (64.48-90 mg/L), and Cl- (472.76-581.95 mg/L), intermediate levels of K+ (50.2-93.0 mg/L), and low levels of Mg2+ (1.27-2.04 mg/L). The total dissolved solids (TDS) concentration ranges between 1830 and 2055 mg/L. The hot spring is categorized as Na-HCO3 type facies that are moderately alkaline, with pH values ranging between 7.9 and 8.2. Analysis of trace element concentrations revealed that the hydrochemical processes were primarily governed by the abundance and solubility of trace elements in the rocks surrounding the hot spring, the pH, and the temperature of the hot spring water. The stable isotope data for δD (-12.36 to 15.21%) and δ18O (-2.84 to -3.38%) provided evidence that the thermal spring is of meteoric origin. Based on Na-K-Ca, K2/Mg, and quartz geothermometers, the temperature range of the reservoir was determined to be between 150 and 205 °C. The temperature range suggests a medium-to-high enthalpy geothermal system.

Mapping of uncontrolled dumpsites in arid regions through remote sensing and image processing.

Due to increased urbanization, the development of new areas, construction of new houses and buildings and uncontrolled dumpsites (UDSs) are becoming a challenge facing local authorities in Saudi Arabia. UDSs pose health risks to the public, potentially deteriorating the environment around them and reducing the value of ongoing development areas. The local municipalities rely on field surveys and citizen reports. This can be inefficient because UDSs are often discovered too late, and remediating them can be costly. This study aimed to assess the conditions of UDSs in two cities in the Eastern Province of Saudi Arabia, Dammam and Hafer Al-Batin, using satellite image classification assessment techniques. The assessment included mapping the UDS locations and studying the spectral reflectance of the materials found in these dumpsites. The study provided a mapping of 62 UDS locations totalling around 13.01 km2 in the broader study area. UDS detections using remote sensing were followed by ground truthing and in situ measurements using a spectroradiometer. In addition, the spectral reflectance of 21 commonly deposited UDS materials was studied, and a spectral library was created for these materials for future use by local authorities.

Suitability of treated wastewater for irrigation and its impact on groundwater resources in arid coastal regions: Insights for water resources sustainability.

Water scarcity threatens agriculture and food security in arid regions like Saudi Arabia. The nation produces significant quantities of municipal wastewater, which, with adequate treatment, could serve as an alternative water source for irrigation, thereby reducing reliance on fossil and non-renewable groundwater. This study assessed the appropriateness of using treated wastewater (TWW) for irrigation in a dry coastal agricultural region in Eastern Saudi Arabia and its impact on groundwater resources. Field investigations were conducted in Qatif to collect water samples and field measurements. A multi-criteria approach was applied to evaluate the TWW's suitability for irrigation, including complying with Saudi Standards, the Irrigation Water Quality Index (IWQI), the National Sanitation Foundation water quality index (NSFWQI), and the individual irrigation indices. In addition, the impact of TWW on groundwater was assessed through hydrogeological and isotope approaches. The results indicate that the use of TWW in the study area complied with the Saudi reuse guidelines except for nitrate, aluminum, and molybdenum. However, irrigation water quality indices classify TWW as having limitations that necessitate the use for salt-tolerant crops on permeable and well-drained soils. Stable isotopic analysis (δ2H, δ18O) revealed that long-term irrigation with TWW affected the shallow aquifer, while deep aquifers were minimally impacted due to the presence of aquitard layer. The application of TWW irrigation has successfully maintained groundwater sustainability in the study area, as evidenced by increased groundwater levels up to 2.3 m. Although TWW contributes to crop productivity, long term agricultural sustainability could be enhanced by improving effluent quality, regulating irrigation practices, implementing buffer zones, and monitoring shallow groundwater. An integrated approach that combines advanced wastewater treatment methods, community involvement, regulatory oversight, and targeted monitoring is recommended to be implemented.

Integrated clustering analysis for delineating seawater intrusion and heavy metals in Arabian Gulf Coastal groundwater of Saudi Arabia.

The intrusion of seawater (SWI) into coastal aquifers is a major concern worldwide, affecting the quantity and quality of groundwater resources. The region of Saudi Arabia that lies along the eastern coast has been affected by SWI, making it crucial to accurately identify and monitor the affected areas. This investigation aimed to map the degree of seawater intrusion in a complex aquifer system in the study area using an integrated clustering analysis approach. The study collected 41 groundwater samples from wells penetrating multi-layered aquifers, and the samples were analyzed for physicochemical properties and major ions. Clustering analysis methods, including Hierarchical Clustering Analysis (double-clustering) (HCA-DC), K-mean (KMC), and fuzzy k-mean clustering (FKM), were employed to evaluate the spatial distribution and association of the groundwater properties. The results revealed that the analyzed GW samples were divided into four clusters with varying degrees of SWI. Clusters A, B, C, and D contained GW samples with very low (fsea of 1.9%), high (fsea of 14.9%), intermediate (fsea of 7.9%), and low (fsea of 5.2%) degrees of SWI, respectively. FKM clustering exhibited superior performance with a silhouette score of 0.83. Additionally, the study found a direct correlation between the degree of SWI and increased concentrations of boron, strontium, and iron, demonstrating SWI's impact on heavy metal levels. Notably, the boron concentration in cluster B, which endured high SWI, exceeded WHO guidelines. The study demonstrates the value of clustering analysis for accurately monitoring SWI and associated heavy metals. The findings can guide policies to mitigate SWI impacts and benefit groundwater-dependent communities. Further research can help develop effective strategies to mitigate SWI effects on groundwater quality and availability.

Potentially Harmful Elements Associated with Dust of Mosques: Pollution Status, Sources, and Human Health Risks.

Potentially harmful elements (PHEs) associated with dust generated from anthropogenic sources can be transported into mosques and deposited on the filters of the air-conditioners (AC); thereby, children and adults are exposed to such PHEs while visiting mosques. Data dealing with the assessment of PHEs pollution and its human health risk in mosques dust in Saudi Arabia are scarce. Therefore, this work aims to examine the levels and pollution status of PHEs in AC filter dust (ACFD) of mosques and their associated human health risk in three Saudi cities: Jubail, Jeddah, and Dammam metropolitan. A similar concentration pattern of PHEs is observed in three cities' mosques with noticeably higher concentrations than both global crustal and local background values for Zn, Cu, Pb, As, and Cd only. Except for Fe, Al, and Mn, the highest PHEs concentrations were found in Jeddah (1407 mg/kg), followed by Dammam (1239 mg/kg) and Jubail (1103 mg/kg). High PHEs' concentrations were also recorded in mosques located near workshops and suburban areas compared to urban areas. Based on the spatial pattern, enrichment factor, geo-accumulation index, pollution load index, and ecological risk values, Jubail, Jeddah, and Dammam have shown moderate pollution levels of Cd, As, Pb, and Zn. On the other hand, Cu. Zn, Cu, Cr, Pb, Ni, As, and Cd had degrees of enrichment levels that varied from significantly enriched to extremely highly enriched in the ACFD of the three cities. Heavy pollution is found in Jubail, which posed a higher potential ecological risk than in Jeddah and Dammam. Cd presents the highest ecological risk factors (ER) in the three cities. Carcinogenic and non-carcinogenic risks for children and adults follow the order: Jeddah > Dammam > Jubail, and the ingestion pathway was the main route for exposure. Carcinogenic and con-carcinogenic risks in the mosques of the various studied cities were generally within the acceptable range.

Mapping of groundwater salinization and modelling using meta-heuristic algorithms for the coastal aquifer of eastern Saudi Arabia.

The growing increase in groundwater (GW) salinization in the coastal aquifers has reached an alarming socio-economic menace in Saudi Arabia and various places globally due to several natural and anthropogenic activities. Hence, evaluating the GW salinization is paramount to safeguarding the water resources planning and management. This study presents three different scenarios viz.: real field investigation, experimental laboratory analysis (using ion chromatography (IC) and inductively coupled plasma mass spectrometry (ICP-MS), etc.), and artificial intelligence (AI) based metaheuristic optimization (MO) algorithms in Saudi Arabia. The main purpose of this study is to validate the obtained experimental-based analysis using hybrid MO techniques comprising of adaptive neuro-fuzzy inference system (ANFIS) hybridized with genetic algorithm (GA), particle swarm optimization (PSO), and biogeography-based optimization (BBO) for identification of GW salinization in the coastal region of eastern Saudi Arabia. Additionally, ArcGIS 10.3 software generates the prediction map based on ANFIS-GA, ANFIS-PSO, and ANFIS-BBO. Feature selection was assessed using the PSO algorithm, and four indices evaluated the estimated models, namely, root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and standard deviation (SD). The simulated results are based on three variable input combinations, which showed that the ANFIS-PSO (MAE = 0.00439) algorithm had the highest accuracy (99 %), followed by the ANFIS-GA (MAE = 0.00767) and ANFIS-BBO (MAE = 0.0132) algorithms. Besides, Ca2+, Na+, Mg2+, and Cl- were the most influential parameters. The accuracy also demonstrated the potential reliability of MO algorithms based on spatial distribution mapping. The employed approach proved to be merit and reliable tool for water resources decision-makers in the coastal aquifer of Saudi Arabia. This approach is believed to improve water scarcity as one of the essential targets for Goal 6 of Sustainable Development Vision 2030 and the Kingdom in general.

Integrated Hydrogeological, Hydrochemical, and Isotopic Assessment of Seawater Intrusion into Coastal Aquifers in Al-Qatif Area, Eastern Saudi Arabia.

Seawater intrusion (SWI) is the main threat to fresh groundwater (GW) resources in coastal regions worldwide. Early identification and delineation of such threats can help decision-makers plan for suitable management measures to protect water resources for coastal communities. This study assesses seawater intrusion (SWI) and GW salinization of the shallow and deep coastal aquifers in the Al-Qatif area, in the eastern region of Saudi Arabia. Field hydrogeological and hydrochemical investigations coupled with laboratory-based hydrochemical and isotopic analyses (18O and 2H) were used in this integrated study. Hydrochemical facies diagrams, ionic ratio diagrams, and spatial distribution maps of GW physical and chemical parameters (EC, TDS, Cl-, Br-), and seawater fraction (fsw) were generated to depict the lateral extent of SWI. Hydrochemical facies diagrams were mainly used for GW salinization source identification. The results show that the shallow GW is of brackish and saline types with EC, TDS, Cl-, Br- concentration, and an increasing fsw trend seaward, indicating more influence of SWI on shallow GW wells located close to the shoreline. On the contrary, deep GW shows low fsw and EC, TDS, Cl-, and Br-, indicating less influence of SWI on GW chemistry. Moreover, the shallow GW is enriched in 18O and 2H isotopes compared with the deep GW, which reveals mixing with recent water. In conclusion, the reduction in GW abstraction in the central part of the study area raised the average GW level by three meters. Therefore, to protect the deep GW from SWI and salinity pollution, it is recommended to implement such management practices in the entire region. In addition, continuous monitoring of deep GW is recommended to provide decision-makers with sufficient data to plan for the protection of coastal freshwater resources.

Geochemical and Spatial Distribution of Topsoil HMs Coupled with Modeling of Cr Using Chemometrics Intelligent Techniques: Case Study from Dammam Area, Saudi Arabia.

Unconsolidated earthen surface materials can retain heavy metals originating from different sources. These metals are dangerous to humans as well as the immediate environment. This danger leads to the need to assess various geochemical conditions of the materials. In this study, the assessment of topsoil materials' contamination with heavy metals (HMs) was conducted. The material's representative spatial samples were taken from various sources: agricultural, industrial, and residential areas. The materials include topsoil, eolian deposits, and other unconsolidated earthen materials. The samples were analyzed using the ICP-OES. The obtained results based on the experimental procedure indicated that the average levels of the heavy metals were: As (1.21 ± 0.69 mg/kg), Ba (110.62 ± 262 mg/kg), Hg (0.08 ± 0.18 mg/kg), Pb (6.34 ± 14.55 mg/kg), Ni (8.95 ± 5.66 mg/kg), V (9.98 ± 6.08 mg/kg), Cd (1.18 ± 4.33 mg/kg), Cr (31.79 ± 37.9 mg/kg), Cu (6.76 ± 12.54 mg/kg), and Zn (23.44 ± 84.43 mg/kg). Subsequently, chemometrics modeling and a prediction of Cr concentration (mg/kg) were performed using three different modeling techniques, including two artificial intelligence (AI) techniques, namely, generalized neural network (GRNN) and Elman neural network (Elm NN) models, as well as a classical multivariate statistical technique (MST). The results indicated that the AI-based models have a superior ability in estimating the Cr concentration (mg/kg) than MST, whereby GRNN can enhance the performance of MST up to 94.6% in the validation step. The concentration levels of most metals were found to be within the acceptable range. The findings indicate that AI-based models are cost-effective and efficient tools for trace metal estimations from soil.

Development of Oil and Gas Stimulation Fluids Based on Polymers and Recycled Produced Water.

Freshwater scarcity is a highly pressing and accelerating issue facing our planet. Therefore, there is a great incentive to develop sustainable solutions by reusing wastewater or produced water (PW), especially in places where it is generated abundantly. PW represents the water produced as a by-product during oil and gas extraction operations in the petroleum industry. It is the largest wastewater stream within the industry, with hundreds of millions of produced water barrels per day worldwide. This research investigates a reuse opportunity for PW to replace freshwater utilization in well stimulation applications. Introducing an environmentally friendly chelating agent (GLDA) allowed formulating a PW-based fluid system that has similar rheological properties in fresh water. This work aims at evaluating the rheological properties of the developed stimulation fluid. The thickening profile of the fluid was controlled by chelation chemistry and varying different design parameters. The experiments were carried out using a high-pressure, high-temperature (HPHT) viscometer. Variables such as polymer concentration and pH have a great impact on the viscosity, while temperature and concentration of the chelating agents are shown to control the thickening profile, as well as its stability and breakage behaviors. Furthermore, 50 pptg of carboxymethyl hydroxypropyl guar (CMHPG) polymer in 20 wt.% chelating solution was shown to sustain 172 cP viscosity for nearly 2.5 h at 150 °F and 100 S-1 shear rate. The newly developed fluid system, solely based on polymer, chelating agent, and PW, showed great rheological capabilities to replace the conventional stimulation fluids based on fresh water. The newly developed fluid can also have economic value realization due to fewer additives, compared with conventional fluids.

Sediment oxygen demand and benthic foraminiferal faunas in the Arabian Gulf: A test of the method on a siliciclastic substrate.

In this study, we investigated the relationship between environmental parameters (water and sediment) and benthic foraminiferal assemblages found in nearshore siliciclastic sediment in the Arabian Gulf. Nearshore marine water and sediment samples were collected from a beach on the Gulf of Bahrain located south of Al Khobar, Saudi Arabia. The water samples were analyzed for biochemical oxygen demand (BOD5) and other chemical analyses. The sediment samples were tested for sediment oxygen demand (SOD) and heavy metal analysis. Results showed the BOD5 levels were below the detection limit (<1 ppm), while the mean SOD value was 0.97 ± 0.08 g/m2·day. The water and sediments were unpolluted and free of eutrophic enrichment, while the sediment was anoxic. The two most common genera in the benthic foraminiferal assemblage, Ammonia and Elphidium, are typical of shallow water sandy substrates. This is the first reported comparison between SOD and benthic foraminiferal assemblages.

Theoretical study of hydroxyl radical (OH˙) induced decomposition of tert-butyl methyl ether (MTBE).

We have characterized the various pathways for OH radical (OH˙) induced decomposition of tert-butyl methyl ether (MTBE) and found an oxidative pathway that leads to complete degradation under the prerequisite that OH radicals are present in excess. A simple polarizable continuum model is used to predict the behavior in an aqueous medium and the behavior is unchanged compared to that in the gas phase. The computational study has also revealed some of the fundamental aspects of hydrogen transfer from asymmetric ethers; the ˙OH assisted hydrogen abstraction has a barrier when the reaction takes place at a distance from the heteroatom, that is, at the tert-butyl group, whereas hydrogen abstraction from the methyl group proceeds without a barrier. The addition of ˙OH to (CH3)3COCH2˙ also proceeds without a barrier, and so does hydrogen abstraction from the resulting adduct ((CH3)3COCH2OH) to form (CH3)3COCH(OH)˙. However, a barrier is yet again found in the hydrogen abstraction from the latter to form (CH3)3COCH[double bond, length as m-dash]O and yet again in the formation of the formyl radical (CH3)3COC[double bond, length as m-dash]O˙ by hydrogen abstraction. The latter is the last step before the final stage of complete oxidation of MTBE to form CO2.

Assessment of the organotin pollution in the coastal sediments of the Western Arabian Gulf, Saudi Arabia.

Organotin compounds (OTCs) are persistent pollutants and are considered as chemicals of environmental concern. They enter the marine environment from the antifouling paints containing organotin compounds on the hulls of ships and boats. We report the results of a study conducted in 2015 on the level of butyltins (TBT, DBT, and MBT) and phenyltins (TPhT, DPhT, and MPhT) in the sediments collected from three fishing harbors (Jubail, Khobar, and Qatif) and a reference site (Half Moon Bay). The concentrations of OTCs in the sediments vary widely among the different sampling locations. Overall, the phenyltins contribute more than the butyltins and the order of the abundance is: MPhT > DPhT > MBT > DBT > TPhT. In most stations, the concentrations of MBT are higher than DBT. The sediments from Khobar and Qatif are moderately polluted, whereas those from the Jubail are ranked as highly polluted. The concentrations of TBT at all study sites are less than the detection limit, and hence, the environmental and ecotoxicological risks are low.

Corrigendum to "Effect of Carboxylic Functional Group Functionalized on Carbon Nanotubes Surface on the Removal of Lead from Water".

[This corrects the article DOI: 10.1155/2010/603978.].

Treating MTBE-contaminated water using sewage sludge-derived activated carbon.

In this study, sewage sludge-derived activated carbon (SDAC) was synthesized, characterized, and tested for its potential as an adsorbent of methyl tert-butyl ether (MTBE). The SDAC was produced by activating the sludge with zinc chloride and subsequently subjected to various ranges of pyrolytic temperatures. It was then characterized using SEM/EDX, BET, and TGA. The SEM-EDX analyses showed that impurities like Fe, Al, Mg, Mn, Ca, and Na of the raw sludge were removed by the higher pyrolytic temperature and acid-washing procedures. TGA showed the thermal stability of the produced material. Results of the BET revealed a significant increase in surface area of the sludge from 1.5 m2/g to 385 m2/g after acid washing. The MTBE removal efficiency of 70% was achieved after 60 min with 2 g/L of SDAC at pH 6, and initial MTBE concentration of 1 ppm. The adsorption kinetics of SDAC fitted into pseudo-second-order reactions. This work demonstrated a beneficial use of a bio-waste material (sewage sludge) in water treatment technologies.

Cadmium Removal from Contaminated Water Using Polyelectrolyte-Coated Industrial Waste Fly Ash.

Fly ash (FA) is a major industrial waste generated from power stations that add extra cost for proper disposal. Recent research efforts have consequently focused on developing ways to make use of FA in environmentally sound applications. This study, therefore, investigates the potential ability of raw fly ash (RFA) and polyelectrolyte-coated fly ash (PEFA) to remove cadmium (Cd) from polluted water. Using layer-by-layer approach, functionalized fly ash was coated with 20 layers from 0.03% (v/v) of cationic poly(diallyldimethylammonium chloride) (PDADMAC) and anionic polystyrene sulfonate (PSS) solutions. Both surface morphology and chemical composition of the adsorbent (PEFA) were characterized using Field-Emission Scanning Electron Microscope (FE-SEM), X-Ray Diffraction (XRD), Fourier-Transform Infrared (FTIR), and X-Ray Fluorescence (XRF) techniques. The effects of pH, adsorbent dosage, contact time, initial contaminant concentration, and mixing rate of the adsorption of Cd were also studied in batch mode experiments. Results of the study revealed that a 4.0 g/L dosage of PEFA removed around 99% of 2.0 mg/L of Cd in 15 min at 150 rpm compared to only 27% Cd removal achieved by RFA under the same conditions. Results also showed that adsorption by PEFA followed both Langmuir and Freundlich models with correlation coefficients of 98% and 99%, respectively.

A Comparative Study of Raw and Metal Oxide Impregnated Carbon Nanotubes for the Adsorption of Hexavalent Chromium from Aqueous Solution.

The present study reports the use of raw, iron oxide, and aluminum oxide impregnated carbon nanotubes (CNTs) for the adsorption of hexavalent chromium (Cr(VI)) ions from aqueous solution. The raw CNTs were impregnated with 1% and 10% loadings (weight %) of iron oxide and aluminum oxide nanoparticles using wet impregnation technique. The synthesized materials were characterized using scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). Batch adsorption experiments were performed to assess the removal efficiency of Cr(VI) ions from water and the effects of pH, contact time, adsorbent dosage, and initial concentration of the Cr(VI) ions were investigated. Results of the study revealed that impregnated CNTs achieved significant increase in the removal efficiency of Cr(VI) ions compared to raw CNTs. In fact, both CNTs impregnated with 10% loading of iron and aluminum oxides were able to remove up to 100% of Cr(VI) ions from aqueous solution. Isotherm studies were carried out using Langmuir and Freundlich isotherm models. Adsorption kinetics of Cr(VI) ions from water was found to be well described by the pseudo-second-order model. The results suggest that metallic oxide impregnated CNTs have very good potential application in the removal of Cr(VI) ions from water resulting in better environmental protection.

Removal of arsenic from water by iron oxide nanoparticles impregnated on carbon nanotubes.

The removal of Arsenic (As (III)) ions from water using modified multi-walled carbon nanotubes (MCNTs) was demonstrated in this study. Results of the study showed that raw (non-modified) MCNTs have very poor efficiency in removing As (III) from water by conventional adsorption mechanisms. However, when MCNTs were modified with iron oxide (Fe-MCNTs), a significant improvement in the As (III) removal efficiency was observed. Results of the study also showed that Fe-MCNTs have much higher efficiency in removing As (III) than MCNTs modified with carboxyl group (COOH-MCNTs). Under the experimental conditions used in the study, about 77.5% of As (III) removal was achieved by the Fe-MCNTs, while COOH-MCNTs removed only 11% at pH 5. In addition, the adsorption kinetics of MCNTs indicated that there is a strong affinity of As (III) ions to the surface of the Fe-MCNTs.

Effect of carboxylic functional group functionalized on carbon nanotubes surface on the removal of lead from water.

The adsorption mechanism of the removal of lead from water by using carboxylic functional group (COOH) functionalized on the surface of carbon nanotubes was investigated. Four independent variables including pH, CNTs dosage, contact time, and agitation speed were carried out to determine the influence of these parameters on the adsorption capacity of the lead from water. The morphology of the synthesized multiwall carbon nanotubes (MWCNTs) was characterized by using field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) in order to measure the diameter and the length of the CNTs. The diameters of the carbon nanotubes were varied from 20 to 40 nm with average diameter at 24 nm and 10 micrometer in length. Results of the study showed that 100% of lead was removed by using COOH-MCNTs at pH 7, 150 rpm, and 2 hours. These high removal efficiencies were likely attributed to the strong affinity of lead to the physical and chemical properties of the CNTs. The adsorption isotherms plots were well fitted with experimental data.