ABSTRACT
Plant-based beverages are enriched by the fermentation process. However, their biocompounds are transformed during gastrointestinal digestion, improving their bioaccessibility, which is of primary importance when considering the associated health benefits. This study aimed to evaluate the effect of in vitro gastrointestinal digestion on phenolic compound bioaccessibility and antioxidant activity of novel Aloe vera juices fermented by probiotic Enterococcus faecium and Lactococcus lactis. Aloe vera juices were digested using the standardized static INFOGEST protocol. During digestion, phenolic compounds and antioxidant activity (DPPH, ABTS, and FRAP) were accessed. The digestion process was seen to significantly increase the total phenolic content of the fermented Aloe vera juices. The fermentation of Aloe vera increased the bioaccessibility of juice biocompounds, particularly for kaempferol, ellagic acid, resveratrol, hesperidin, ferulic acid, and aloin. The phenolics released during digestion were able to reduce the oxidative radicals assessed by ABTS and FRAP tests, increasing the antioxidant action in the intestine, where they are absorbed. The fermentation of Aloe vera by probiotics is an excellent process to increase the bioavailability of beverages, resulting in natural added-value functional products.
ABSTRACT
Xylooligosaccharides (XOS) are widely used in the food industry as prebiotic components. XOS with high purity are required for practical prebiotic function and other biological benefits, such as antioxidant and inflammatory properties. In this work, we immobilized the recombinant endo-1,4-ß-xylanase of Malbranchea pulchella (MpXyn10) in various chemical supports and evaluated its potential to produce xylooligosaccharides (XOS) from hydrothermal liquor of eucalyptus wood chips. Values >90% of immobilization yields were achieved from amino-activated supports for 120 min. The highest recovery values were found on Purolite (142%) and MANAE-MpXyn10 (137%) derivatives, which maintained more than 90% residual activity for 24 h at 70 °C, while the free-MpXyn10 maintained only 11%. In addition, active MpXyn10 derivatives were stable in the range of pH 4.0−6.0 and the presence of the furfural and HMF compounds. MpXyn10 derivatives were tested to produce XOS from xylan of various sources. Maximum values were observed for birchwood xylan at 8.6 mg mL−1 and wheat arabinoxylan at 8.9 mg mL−1, using Purolite-MpXyn10. Its derivative was also successfully applied in the hydrolysis of soluble xylan present in hydrothermal liquor, with 0.9 mg mL−1 of XOS after 3 h at 50 °C. This derivative maintained more than 80% XOS yield after six cycles of the assay. The results obtained provide a basis for the application of immobilized MpXyn10 to produce XOS with high purity and other high-value-added products in the lignocellulosic biorefinery field.
Subject(s)
Eucalyptus , Xylans , Wood , Glucuronates , Oligosaccharides/chemistry , Endo-1,4-beta Xylanases , Prebiotics , HydrolysisABSTRACT
Fructooligosaccharides (FOS) are usually synthesized with pure enzymes using highly concentrated sucrose solutions. In this work, low-cost aguamiel and molasses were explored as sucrose alternatives to produce FOS, via whole-cell fermentation, with an Aspergillus oryzae DIA-MF strain. FOS production process was optimized through a central composite experimental design, with two independent variables: initial sucrose concentration in a medium composed of aguamiel and molasses (AgMe), and inoculum concentration. The optimized process-165 g/L initial sucrose in AgMe (adjusted with concentrated molasses) and 1 × 107 spores/mL inoculum concentration-resulted in an FOS production of 119 ± 12 g/L and a yield of 0.64 ± 0.05 g FOS/g GFi. Among the FOSs produced were kestose, nystose, 1-fructofuranosyl-nystose, and potentially a novel trisaccharide produced by this strain. To reduce the content of mono- and disaccharides in the mixture, run a successive fermentation was run with two Saccharomyces cerevisiae strains. Fermentations run with S. cerevisiae S227 improved FOS purity in the mixture from 39 ± 3% to 61.0 ± 0.6% (w/w) after 16 h of fermentation. This study showed that agro-industrial wastes such as molasses with aguamiel are excellent alternatives as substrate sources for the production of prebiotic FOS, resulting in a lower-cost process.
ABSTRACT
Superabsorbent hydrogels (SAHs) are three dimensional networks formed by polymers that can absorb aqueous solution of over 100% of their initial weight. This work aimed to develop and characterize SAHs of Chitosan/Xanthan gum (CG), Chitosan/Alginate (CA) and controlled Chitosan (C), Xanthan gum (G), and Alginate (A) produced using "onion-like" methodology. The swelling performance, the morphological structure, the crystallinity, and the Fourier transformed infrared spectroscopy characteristics of SAH were used for the characterization of polyelectrolytes complex. Swelling analysis showed that chitosan has a strong influence on the maintenance of hydrogels structure after swelling, mainly in the acid environment (pH = 2). The chitosan hydrogel presented around 3000% of acidic fluid absorption after 24 h. The chitosan:xanthan gum (1:1 and 2:1 named as C1G1 and C2G1, respectively) hydrogels were the best combination regarding swelling performance in an acid environment, reaching 1665% and 2024%, respectively, as well at pH 7.0, presenting 1005% (C1G1) and 667% (C2G1). Scanning electron microscopy analysis showed samples with pores, and with different shapes. The X-ray diffraction showed the presence of a characteristic peak at 2θ = 20° in all developed composition because of the crystalline nature of chitosan. This work shows the possibility of developing eco-friendly biopolymer-based SAHs at a low cost with a good swelling capacity and stability.
ABSTRACT
Synergism among reflexes probably contributes to exercise hyperventilation in patients with heart failure with reduced ejection fraction (HFrEF). Thus, we investigated whether the carotid chemoreflex and the muscle metaboreflex interact to the regulation of ventilation ( VËE ) in HFrEF. Ten patients accomplished 4-min cycling at 60% peak workload and then recovered for 2 min under either: (a) 21% O2 inhalation (tonic carotid chemoreflex activity) with legs' circulation free (inactive muscle metaboreflex); (b) 100% O2 inhalation (suppressed carotid chemoreflex activity) with legs' circulation occluded (muscle metaboreflex activation); (c) 21% O2 inhalation (tonic carotid chemoreflex activity) with legs' circulation occluded (muscle metaboreflex activation); or (d) 100% O2 inhalation (suppressed carotid chemoreflex activity) with legs' circulation free (inactive muscle metaboreflex) as control. VËE , tidal volume (VT ) and respiratory frequency (fR ) were similar between each separated reflex (protocols a and b) and control (protocol d). Calculated sum of separated reflexes effects was similar to control. Oppositely, VËE (mean ± SEM: Δ vs. control = 2.46 ± 1.07 L/min, p = .05) and fR (Δ = 2.47 ± 0.77 cycles/min, p = .02) increased versus control when both reflexes were simultaneously active (protocol c). Therefore, the carotid chemoreflex and the muscle metaboreflex interacted to VËE regulation in a fR -dependent manner in patients with HFrEF. If this interaction operates during exercise, it can have some contribution to the HFrEF exercise hyperventilation.
Subject(s)
Heart Failure/physiopathology , Muscle, Skeletal/physiopathology , Reflex , Respiration , Adult , Aged , Cardiac Output , Exercise , Female , Humans , Male , Middle AgedABSTRACT
This work evaluated the degradation of sugarcane vinasse with the production of biomass by Pleurotus sajor-caju CCB020, considering the combination of temperature and pH effects, using surface response methodology (RSM). A 22 complete central factorial composite experiment was used to analyze the results. The optimum temperature and pH values were respectively 27 °C and 5.6 for maximum decolorization yield and 20 °C and 6.8 for maximum biomass production. In parallel, scale-up experiments under conditions of 30 °C and initial pH 5.0 were evaluated in two different air-lift bioreactors of 7.0 L. Under these conditions, reductions of 53% and 58% in chemical oxygen demand (COD) and 71% and 58% in biological oxygen demand (BOD) were obtained respectively with the concentric tube type air-lift bioreactor with an increased degassing zone and without an increased degassing zone. Under these conditions, this study concluded that the systematic combination of P. sajor-caju and vinasse can be applied in the biodegradation process of refractory compounds contained in vinasse, concomitant to obtaining biomass and laccase and manganese peroxidase enzymes. Due to the good performance of the air-lift bioreactors, they can be used in scale studies in future industrial vinasse applications, besides it is possible to emphasize that different configurations in the bioreactor can affect the efficiency of the process.
Subject(s)
Bioreactors , Waste Disposal, Fluid/methods , Biodegradation, Environmental , Biological Oxygen Demand Analysis , Biomass , Laccase/metabolism , Peroxidases , Saccharum/chemistry , TemperatureABSTRACT
The objective of this study was to evaluate the combined effect of xanthan gum (XG) on physicochemical, rheological and textural properties of gluten-free batter and bread. To prepare gluten-free batter, different levels of XG (1.5, 2.5 and 3.5%) and water (90, 100 and 110%) were added to a base formula of rice (50%), maize (30%) and quinoa flours (20%); and the batters were evaluated in a factorial design. Several properties on both batter (stickiness and back extrusion) and its corresponding bread (loaf specific volume, baking loss, water activity and pH, texture profile, mean cell area, mean cell density, cell size uniformity, void fraction, mean cell compactness and mean cell aspect ratio) were then evaluated. Higher XG doses (pâ¯<â¯.001) tended to produce batters of lower stickiness, adhesion and cohesive-strength, yet, of higher firmness, consistency, cohesiveness and viscosity index. After baking, these loaves presented lower specific volume; lower crumb aw, pH, hardness, springiness, mean cell area and void fraction; and higher (pâ¯<â¯.001) chewiness, resilience, mean cell density, cell size uniformity and mean cell compactness. The sticker and less consistent batters produced with higher WC rendered larger bread loaves of softer and more springy/resilient crumbs with greater mean cell size and void fraction. Gluten-free loaves of good appearance in terms of higher specific volume, lower crumb hardness, higher crumb springiness, and open grain visual texture were obtained in formulations with 110% WC and XG doses between 1.5 and 2.5%.
Subject(s)
Bread/analysis , Polysaccharides, Bacterial/analysis , Water/analysis , Chemical Phenomena , Chenopodium quinoa/chemistry , Flour/analysis , Food Handling , Food Quality , Glutens/analysis , Hardness , Oryza/chemistry , Rheology , Viscosity , Zea mays/chemistryABSTRACT
In this work, biosurfactant production by Wickerhamomyces anomalus CCMA 0358 was increased through the development of an optimized culture medium using response surface methodology. The optimized culture medium contained yeast extract (4.64â¯g/L), ammonium sulfate (4.22â¯g/L), glucose (1.39â¯g/L) and olive oil (10â¯g/L). Biosurfactant production using this medium was validated both in flasks and bioreactor, and the surface tension was reduced from 49.0â¯mN/m up to 31.4â¯mN/m and 29.3â¯mN/m, respectively. In both cases, the highest biosurfactant production was achieved after 24â¯h of growth. W. anomalus CCMA 0358 demonstrated to be a fast biosurfactant producer (24â¯h) as compared to other yeast strains previously reported (144-240â¯h). The produced biosurfactant remained stable at high temperature (121⯰C), NaCl concentrations as high as 300â¯g/L, and pH values between 6 and 12. The crude biosurfactant allowed the recovery of 20% of crude oil from contaminated sand, being a promising candidate for application in bioremediation or in the petroleum industry.
Subject(s)
Environmental Pollutants/chemistry , Petroleum , Saccharomycetales/metabolism , Surface-Active Agents/chemistry , Surface-Active Agents/metabolism , Bioreactors , Environmental Restoration and Remediation , Hydrogen-Ion Concentration , Salinity , Surface Tension , TemperatureABSTRACT
In this work, biosurfactant production by several yeast strains was evaluated using different culture media. The best results were obtained with the strain Wickerhamomyces anomalus CCMA 0358 growing in a culture medium containing glucose (1g/L) and olive oil (20g/L) as carbon sources. This strain produced 2.6g of biosurfactant per liter after 24h of growth. The crude biosurfactant reduced the surface tension of water to values around 31mN/m, and its critical micelle concentration was 0.9mg/mL. This biosurfactant was characterized through mass spectrometry (MS), and nuclear magnetic resonance (NMR) as a mixture of two different glycolipids, comprising a sugar moiety linked to one or three molecules of oleic acid. To the best of our knowledge, these biosurfactants are structurally different from those previously reported. Furthermore, the crude biosurfactant exhibited antimicrobial activity against several microorganisms, including the pathogens Candida albicans, Escherichia coli, Staphylococcus epidermidis and Streptococcus agalactiae, which opens the possibility for its use in several biomedical applications.
Subject(s)
Anti-Infective Agents/metabolism , Saccharomycetales/metabolism , Surface-Active Agents/metabolism , Anti-Infective Agents/pharmacology , Candida albicans/drug effects , Candida albicans/growth & development , Culture Media/chemistry , Escherichia coli/drug effects , Escherichia coli/growth & development , Fermentation , Glucose/metabolism , Micelles , Microbial Sensitivity Tests , Olive Oil/metabolism , Staphylococcus epidermidis/drug effects , Staphylococcus epidermidis/growth & development , Streptococcus agalactiae/drug effects , Streptococcus agalactiae/growth & development , Surface Tension , Surface-Active Agents/pharmacology , WaterABSTRACT
Worldwide, bacterial resistance to chemical antibiotics has reached such a high level that endangers public health. Presently, the adoption of alternative strategies that promote the elimination of resistant microbial strains from the environment is of utmost importance. This review discusses and analyses several (potential) alternative strategies to current chemical antibiotics. Bacteriophage (or phage) therapy, although not new, makes use of strictly lytic phage particles as an alternative, or a complement, in the antimicrobial treatment of bacterial infections. It is being rediscovered as a safe method, because these biological entities devoid of any metabolic machinery do not possess any affinity whatsoever to eukaryotic cells. Lysin therapy is also recognized as an innovative antimicrobial therapeutic option, since the topical administration of preparations containing purified recombinant lysins with amounts in the order of nanograms, in infections caused by Gram-positive bacteria, demonstrated a high therapeutic potential by causing immediate lysis of the target bacterial cells. Additionally, this therapy exhibits the potential to act synergistically when combined with certain chemical antibiotics already available on the market. Another potential alternative antimicrobial therapy is based on the use of antimicrobial peptides (AMPs), amphiphilic polypeptides that cause disruption of the bacterial membrane and can be used in the treatment of bacterial, fungal and viral infections, in the prevention of biofilm formation, and as antitumoral agents. Interestingly, bacteriocins are a common strategy of bacterial defense against other bacterial agents, eliminating the potential opponents of the former and increasing the number of available nutrients in the environment for their own growth. They can be applied in the food industry as biopreservatives and as probiotics, and also in fighting multi-resistant bacterial strains. The use of antibacterial antibodies promises to be extremely safe and effective. Additionally, vaccination emerges as one of the most promising preventive strategies. All these will be tackled in detail in this review paper.
Subject(s)
Bacterial Infections/microbiology , Bacterial Infections/therapy , Biological Therapy/methods , Drug Resistance, Bacterial , Biomedical Research/trends , HumansABSTRACT
The aim of this work was to improve the production of fructosyltransferase (FTase) by Solid-State Fermentation (SSF) using aguamiel (agave sap) as culture medium and Aspergillus oryzae DIA-MF as producer strain. SSF was carried out evaluating the following parameters: inoculum rate, incubation temperature, initial pH and packing density to determine the most significant factors through Box-Hunter and Hunter design. The significant factors were then further optimized using a Box-Behnken design and response surface methodology. The maximum FTase activity (1347U/L) was obtained at 32°C, using packing density of 0.7g/cm(3). Inoculum rate and initial pH had no significant influence on the response. FOS synthesis applying the enzyme produced by A. oryzae DIA-MF was also studied using aguamiel as substrate.
Subject(s)
Aspergillus oryzae/metabolism , Biotechnology/methods , Hexosyltransferases/metabolism , Oligosaccharides/biosynthesis , Aspergillus oryzae/enzymology , Culture Media , Fermentation , Hydrogen-Ion Concentration , Temperature , Waste ProductsABSTRACT
Characterization, with emphasis on the rheological properties, of Cassia grandis seeds galactomannan gel containing immobilized Cramoll 1-4 is presented. The gels, with and without immobilized Cramoll 1-4, were evaluated along time by rheometry, pH, color, microbial contamination and lectin hemagglutinating activity (HA). Rheological determinations confirmed the gels to be very stable up to 30 days with variations occurring after this period. Rheological data also showed that the gel/Cramoll 1-4 immobilizing matrix loses its elastic modulus substantially after 60 days. Both gels presented no microbial contamination as well as a pH close to neutral. Colorimetric parameters demonstrated the gels transparency with occasional yellowness. The opacity of the galactomannan gel did not change significantly along the study; the same did not occur for the gel with immobilized Cramoll 1-4 as a statistically significant reduction of its opacity was observed. In what concerns immobilized Cramoll 1-4 HA, up to 90% of its initial HA was maintained after 20 days, with a decrease to 60% after 60 days. These results combined with the thickening and stabilizing characteristics of the galactomannan gel make this gel a promising immobilizing matrix for Cramoll 1-4 that can be further exploited for clinical and cosmetic applications.
Subject(s)
Cassia/chemistry , Mannans/chemistry , Plant Lectins/chemistry , Seeds/chemistry , Galactose/analogs & derivatives , Humidity , Hydrogen-Ion Concentration , Microbiology , TemperatureABSTRACT
A galactose-specific lectin from Bauhinia monandra leaves (BmoLL) has been purified through ammonium sulfate fractionation followed by guar gel affinity chromatography column. This study aimed to evaluate the potential anti-inflammatory and antinociceptive activity of pure BmoLL in mice. Anti-inflammatory activity was evaluated by 1% carrageenan-induced inflammation in mice treated with BmoLL. Acetic acid-induced abdominal writhing and hot plate methods evaluated antinociceptive activity. BmoLL significantly inhibited the carrageenan-induced paw edema by 47% (30 mg/kg) and 60.5% (60 mg/kg); acetylsalicylic acid (ASA, 100 mg/kg) showed inhibition of 70.5%, in comparison to controls. Leukocyte migration, an immune response to the inflammation process, was significantly reduced in presence of BmoLL; in mice treated with ASA the decrease in leukocyte migration was similar to 15 mg/kg of the lectin. BmoLL at doses of 15, 30 and 60 mg/kg significantly reduced the number of animal contortions by 43.1, 50.1 and 71.3%, respectively. BmoLL leukocyte migration was significantly reduced; in mice treated with ASA the decrease in leukocyte migration was similar to 15 mg/kg of the lectin. BmoLL at doses of 15, 30 and 60 mg/kg significantly reduced the number of animal contortions by 43.1, 50.1 and 71.3%, respectively. The lectin (30 and 60 mg/kg) showed a significant effect in the hot plate assay. BmoLL anti-inflammatory and antinociceptive effects were dose-dependent. The search for new and natural compounds, with minimal side effects, to control pain and inflammation, is constantly increasing. BmoLL has great potential as a natural anti-inflammatory product that can be explored for pharmacological purposes.
ABSTRACT
Gallic acid production in a batch bioreactor was evaluated using as catalytic material the mouldy polyurethane solids (MPS) obtained from a solid-state fermentation (SSF) bioprocess carried out for tannase production by Aspergillus niger GH1 on polyurethane foam powder (PUF) with 5 % (v/w) of tannic acid as inducer. Fungal biomass, tannic acid consumption and tannase production were kinetically monitored. SSF was stopped when tannase activity reached its maximum level. Effects of washing with distilled water and drying on the tannase activity of MPS were determined. Better results were obtained with dried and washed MPS retaining 84 % of the tannase activity. Maximum tannase activity produced through SSF after 24 h of incubation was equivalent to 130 U/gS with a specific activity of 36 U/mg. The methylgallate was hydrolysed (45 %) in an easy, cheap and fast bioprocess (30 min). Kinetic parameters of tannase self-immobilized on polyurethane particles were calculated to be 5 mM and 04.1 × 10(-2) mM/min for K M and V max, respectively. Results demonstrated that the MPS, with tannase activity, can be successfully used for the production of the antioxidant gallic acid from methyl-gallate substrate. Direct use of PMS to produce gallic acid can be advantageous as no previous extraction of enzyme is required, thus reducing production costs.
Subject(s)
Aspergillus niger/metabolism , Carboxylic Ester Hydrolases/biosynthesis , Fungal Proteins/biosynthesis , Gallic Acid/analogs & derivatives , Gallic Acid/metabolism , Tannins/metabolism , Adsorption , Bioreactors , Culture Media/chemistry , Desiccation , Fermentation , Hydrogen-Ion Concentration , Kinetics , Polyurethanes/chemistryABSTRACT
Background Streptomyces sp. DPUA 1576 from Amazon lichens was studied to protease and fibrinolytic production. A 2² factorial experimental design was applied to optimize its protease enzyme production using two independent variables, namely soybean flour and glucose concentrations. Results The optimal conditions to obtain high protease production (83.42 U/mL) were 1.26% soybean flour and 1.23% glucose concentration. A polynomial model was fitted to correlate the relationship between the two variables and protease activity. In relation to fibrinolytic activity, the highest activity of 706.5 mm² was obtained at 1.7% soybean flour and 1.0% glucose concentration, which was 33% higher than plasmin. Fibrinolytic production was not optimized in the studied conditions. Conclusions These results show that the optimization of the culture medium can enhance protease production, thus becoming a good process for further research. In addition, Streptomyces sp. DPUA 1576, isolated from Amazon lichens, might be a potential strain for fibrinolytic protease production.
Subject(s)
Peptide Hydrolases/biosynthesis , Streptomyces/enzymology , Fibrinolytic Agents/metabolism , Glycine max , Models, Statistical , Actinobacteria , Flour , Glucose/analysis , LichensABSTRACT
Galactomannan extracted from seeds of Cassia grandis with 0.1M NaCl, followed by ethanol precipitation, presented a yield of 36 ± 8%. The polysaccharide has a constant mannose/galactose ratio (2.44:1). Methylation analysis, one and two dimensional NMR spectroscopy confirmed that the polysaccharide has a central core composed of 4-linked ß-mannose units, with branches of galactose, linked to the carbohydrate core through α(1-6) linkage. The amorphous nature of the galactomannan was confirmed by X-ray diffraction. Rheological characterization exhibited Newtonian plateaus followed by shear-thinning zones characteristic of polymer solutions up to 1.5% (w/v) and above this value the system exhibited yield stress associated with a weak gel. Adjusting stress-strain curves confirmed a 1.6% (w/v) as the galactomannan concentration value for the sol-gel transition. These results indicate that the galactomannan extracted from C. grandis seeds presents rheological characteristics suitable for applications in pharmaceutical, biomedical, cosmetic and food industries.
Subject(s)
Cassia/chemistry , Mannans/chemistry , Plant Extracts/chemistry , Seeds/chemistry , Cassia/anatomy & histology , Elasticity , Galactose/analogs & derivatives , Rheology , ViscosityABSTRACT
Aqueous two-phase systems (ATPSs) composed by UCON (ethylene oxide/propylene oxide copolymer) and potassium phosphate salts were for the first time evaluated in the recovery of Peniophora cinerea laccase from complex fermented medium. The ATPSs were obtained by combining the random copolymer UCON with KH2PO4, potassium phosphate buffer pH 7 or K2HPO4. According to the results, protein partition occurred predominantly toward the saline phase (bottom phase) of the ATPSs, while some contaminants such as pigments partitioned mainly to the top phase. In preliminary tests, it was found that the salt with the lowest pH value (KH2PO4, pH 4.6) stimulated the enzyme activity, while the other salts (pH between 7.0 and 9.5) caused a strong inhibition. However, the salt inhibition was not observed in the equilibrium phases of the UCON-Potassium phosphate ATPSs. The laccase recovery was high for all the biphasic systems, but the highest value (134%) was obtained when using UCON combined with KH2PO4. When compared to conventional concentration and purification methods (lyophilization, ammonium sulfate precipitation, ultrafiltration, and ion exchange chromatography), ATPS was demonstrated to be an efficient alternative for P. cinerea laccase recovery from fermented medium.
Subject(s)
Basidiomycota/enzymology , Epoxy Compounds/chemistry , Ethylene Oxide/chemistry , Laccase/isolation & purification , Phosphates/chemistry , Potassium Compounds/chemistry , SaltsABSTRACT
Aspergillus ochraceus, a thermotolerant fungus isolated in Brazil from decomposing materials, produced an extracellular ß-xylosidase that was purified using DEAE-cellulose ion exchange chromatography, Sephadex G-100 and Biogel P-60 gel filtration. ß-xylosidase is a glycoprotein (39 % carbohydrate content) and has a molecular mass of 137 kDa by SDS-PAGE, with optimal temperature and pH at 70 °C and 3.0-5.5, respectively. ß-xylosidase was stable in acidic pH (3.0-6.0) and 70 °C for 1 h. The enzyme was activated by 5 mM MnCl2 (28 %) and MgCl2 (20 %) salts. The ß-xylosidase produced by A. ochraceus preferentially hydrolyzed p-nitrophenyl-ß-D-xylopyranoside, exhibiting apparent K(m) and V(max) values of 0.66 mM and 39 U (mg protein)⻹ respectively, and to a lesser extent p-nitrophenyl-ß-D-glucopyranoside. The enzyme was able to hydrolyze xylan from different sources, suggesting a novel ß-D-xylosidase that degrades xylan. HPLC analysis revealed xylans of different compositions which allowed explaining the differences in specificity observed by ß-xylosidase. TLC confirmed the capacity of the enzyme in hydrolyzing xylan and larger xylo-oligosaccharides, as xylopentaose.
Subject(s)
Aspergillus ochraceus/enzymology , Xylans/metabolism , Xylosidases/isolation & purification , Xylosidases/metabolism , Aspergillus ochraceus/isolation & purification , Brazil , Chlorides/metabolism , Chromatography, Gel , Chromatography, Ion Exchange , Environmental Microbiology , Enzyme Activators/metabolism , Enzyme Stability , Hydrogen-Ion Concentration , Kinetics , Magnesium Chloride/metabolism , Manganese Compounds/metabolism , Molecular Weight , Substrate Specificity , Temperature , Xylosidases/chemistryABSTRACT
A very high gravity (VHG) repeated-batch fermentation system using an industrial strain of Saccharomyces cerevisiae PE-2 (isolated from sugarcane-to-ethanol distillery in Brazil) and mimicking industrially relevant conditions (high inoculation rates and low O(2) availability) was successfully operated during fifteen consecutive fermentation cycles, attaining ethanol at 17.1 ± 0.2% (v/v) with a batch productivity of 3.5 ± 0.04 g l(-1) h(-1). Moreover, this innovative operational strategy (biomass refreshing step) prevented critical decreases on yeast viability levels and promoted high accumulation of intracellular glycerol and trehalose, which can provide an adaptive advantage to yeast cells under harsh industrial environments. This study contributes to the improvement of VHG fermentation processes by exploring an innovative operational strategy that allows attaining very high ethanol titres without a critical decrease of the viability level thus minimizing the production costs due to energy savings during the distillation process.