Electrochemical and Bioelectrochemical Sensing Platforms for Diagnostics of COVID-19.

Rapid transmission and high mortality rates caused by the SARS-CoV-2 virus showed that the best way to fight against the pandemic was through rapid, accurate diagnosis in parallel with vaccination. In this context, several research groups around the world have endeavored to develop new diagnostic methods due to the disadvantages of the gold standard method, reverse transcriptase polymerase chain reaction (RT-PCR), in terms of cost and time consumption. Electrochemical and bioelectrochemical platforms have been important tools for overcoming the limitations of conventional diagnostic platforms, including accuracy, accessibility, portability, and response time. In this review, we report on several electrochemical sensors and biosensors developed for SARS-CoV-2 detection, presenting the concepts, fabrication, advantages, and disadvantages of the different approaches. The focus is devoted to highlighting the recent progress of electrochemical devices developed as next-generation field-deployable analytical tools as well as guiding future researchers in the manufacture of devices for disease diagnosis.

Investigation of the performance of cross-linked poly(acrylic acid) and poly(methacrylic acid) as efficient adsorbents in SPE columns for simultaneous preconcentration of tricyclic antidepressants in water samples.

A solid phase extraction-based (SPE) procedure for simultaneous preconcentration of five tricyclic antidepressants (TCAs), amitriptyline hydrochloride (AMT), nortriptyline hydrochloride (NOR), doxepin hydrochloride (DOX), imipramine hydrochloride (IMI), and clomipramine hydrochloride (CLO) from water samples with determination by HPLC-DAD is proposed. Polymers were characterized by FT-IR, SEM, and thermogravimetric analysis. SPE-based methods were carried out by the preconcentration of 320.0 mL of TCAs at pH 7.0 (buffered with 0.01 mol L-1 phosphate buffer) through 70.0 mg of adsorbent packed into a SPE cartridge, followed by elution with 1.0 mL of ACN : MeOH : acetic acid solution (45 : 45 : 10% v/v). Higher preconcentration factors were obtained ranging from 117.9 to 372.2 and 207.1 to 396.1 by using poly(MAA-co-EGDMA) and poly(AA-co-EGDMA), respectively, yielding lower limits of detection (0.03 to 0.12 µg L-1) and (0.03 to 0.15 µg L-1). These outcomes show satisfactory detectability of SPE-based methods, with slightly better performance using poly(MAA-co-EGDMA). On the other hand, poly(AA-co-EGDMA) was able to preconcentrate TCAs in the presence of humic acid (7.0 mg L-1) without interference. The precision of methods assessed as RSD (%) was very similar, ranging from 1.7% to 16.3% for poly(MAA-co-EGDMA) and 1.7% to 13.4% for poly(AA-co-EGDMA). SPE cartridges packed with the polymers showed high reusability (52 cycles of preconcentration and elution) without losing adsorption efficiency. The methods were applied to determine TCAs in tap, lake, and stream water samples and the accuracy was attested by addition and recovery tests (86.7-116.0%), with determined nortriptyline ranging from 0.48 to 0.52 µg L-1 in lake water samples.

Magnetic restricted-access carbon nanotubes for dispersive solid phase extraction of organophosphates pesticides from bovine milk samples.

Magnetic restricted-access carbon nanotubes (M-RACNTs) were synthesised and used for dispersive solid phase extraction of organophosphates (chlorpyriphos, malathion, disulfoton, pirimiphos) from commercial bovine raw milk samples. Due to their magnetic susceptibility, M-RACNTs were easily separated from the samples/solvents using a neodymium magnet, and the extracted organophosphates were analysed by gas chromatography-mass spectrometry. The protein exclusion capacity was about 100%. Kinetic and isotherm data (for M-RACNTs - malathion interaction) were adequately adjusted to the pseudo-second order and Sips models, respectively, and the maximum adsorption capacity was about 0.55 mg g-1. The method presented linear ranges from 5.0 to 40.0 µg L-1 for all analytes, with determination coefficients from 0.9902 to 0.9963. The intra-assay precisions (as relative standard deviation) and accuracies (as relative error) ranged from 10.47 to 19.85% and from -0.18 to -18.80%, respectively, whereas the inter-assay precisions ranged from 6.48 to 18.76% and from -0.22 to 19.49%, respectively for 5.0, 20.0 and 40.0 µg L-1 organophosphates levels. The organophosphates were not stable at 4 and 24 h (relative errors ranged from -39.30 to 72.07% and -69.64 to 75.95%, respectively). Limits of detection ranged from 0.36 to 0.95 µg L-1, and 5 µg L-1 was defined as the limit of quantification for all the analytes. The proposed method was applied in the determination of organophosphates in five commercial milk samples, and no pesticides were detected.