ABSTRACT
Size-controllable Au nanodot arrays (50, 63, and 83 nm dot size) with a narrow size distribution (± 5%) were prepared by a direct contact printing method on an indium tin oxide (ITO) substrate. Titania was added to the Au nanodots using TiO(2) sols of 2-3 nm in size. This created a precisely controlled Au nanodot with 110 nm of TiO(2) overcoats. Using these precisely controlled nanodot arrays, the effects of Au nanodot size and TiO(2) overcoats were investigated for photoelectrochemical water splitting using a three-electrode system with a fiber-optic visible light source. From UV-vis measurement, the localized surface plasmon resonance (LSPR) peak energy (ELSPR) increased and the LSPR line width (Γ) decreased with decreasing Au nanodot size. The generated plasmonic enhancement for the photoelectrochemical water splitting reaction increased with decreasing Au particle size. The measured plasmonic enhancement for light on/off experiments was 25 times for the 50 nm Au size and 10 times for the 83 nm Au nanodot size. The activity of each catalyst increased by a factor of 6 when TiO2 was added to the Au nanodots for all the samples. The activity of the catalyst was proportional to the quality factor (defined as Q = E(LSPR)/Γ) of the plasmonic metal nanostructure. The enhanced water splitting performance with the decreased Au nanodot size is probably due to more generated charge carriers (electron/hole pair) by local field enhancement as the quality factor increases.
ABSTRACT
Magnetoelastic sensor techniques have the unique characteristics of being able to wirelessly detect resonant frequency shifts of a magnetoelastic foil in response to differences in the foil mass. However, the mathematical expression that links the resonant frequency shift with the change in the mass of the magnetoelastic foil is rarely reported. Furthermore, this relationship is not easy to ascertain due to potential changes in the Young's modulus of the sensor upon a change in mass loading. In this paper, we have shown that adsorption of water vapor from the gas phase by magnetoelastic ribbons coated with a two layer porous thin film (SiO2/Pt-TiO2) induces large changes in the effective Young's modulus of the sensor. We also demonstrated that the change in Young's modulus upon mass loading can be eliminated from the relationship between mass loading and shifts in resonant frequency by using a technique that we refer to as the two different length sensor method (TDLS). This methodology permits the conversion of the magnetoelastic sensor into a microbalance. From data presented in this paper, we illustrate that the sensitivity for the same sensor can range between 214 Hz/mg for mass loadings of Au to 438 kHz/mg for acetone. In the case of water adsorption, frequency shifts varies from 20.0 kHz/mg when Deltam
ABSTRACT
The effects of pH and ultraviolet (UV) light with ligated formic acid on mesoporous TiO2 were characterized by transmission Fourier transform infrared (FTIR) spectroscopy and compared with adsorbed formate complexes. Surface-modified anatase thin films were prepared from acidic aqueous nanoparticulate anatase suspensions diluted with methanol and ethanol. Bands assigned to carboxylic acid groups displayed unique bonding character in the ligated formic acid on the anatase surface. For increased proton concentrations in the films, separation in -COO stretching bands (delta nu) for formic acid increased (increase in frequency for nuC=O and decrease in frequency for nuC-O). With UV exposure, surface-bound organics were rapidly removed by photocatalytic oxidation at 40 degrees C and 40% relative humidity (RH). In addition, the delta nu of the formic acid bands decreased as organics were mineralized to carbonates and CO2 with UV light. Aqueous formic acid adsorption experiments showed a distinctly different bonding environment lacking carbonate, and the delta nu for the carboxylic groups indicated a bridging bidentate coordination. The delta nu of the bands increased with increasing proton concentration, with both bands shifting to higher wavenumbers. The shifts may be ascribed to the influence of protonation on surface charge and the effect of that charge on the electronegativity of carboxylate groups bound to the surface. As alcohols are used in the mesoporous TiO2 solar cell preparation, implications of these surface modifications to dye-sensitized photovoltaics are discussed.
ABSTRACT
In this study, a magnetoelastic resonance microbalance (MERM) was used to directly measure the gas-phase adsorption behavior of water vapor, isopropyl alcohol, and acetone on a sol-gel-derived titanium dioxide sensor coating. The nature of the MERM platform enables chemical measurements in situations in which wires or physical connections are undesired (or not possible) or in which sensor cost is a major issue. The underlying MERM technique (with an uncoated sensor) showed excellent day-to-day stability, a linear calibration over a 1 kHz change in frequency (or a 1.5-mg change in mass), and the ability to detect a mass change of 15 microg without any efforts at sensitivity optimization. The titanium dioxide coated sensor yielded excellent response to each of the analytes; however, the response did not follow a simple linear calibration function. A more complex calibration model or utilization of the coated sensor in a limited concentration range would be required for quantitative analysis. The process of applying the metal oxide coatings onto the magnetic substrate altered the structure of the thin film layer, resulting in a relatively loose packing of the porous primary titanium dioxide particles to create an open overall honeycomb structure, thereby affecting the adsorption behavior at high relative concentration.
