ABSTRACT
The aim of this study is to describe the kinematic gait characteristics of straight line walk in clinically sound dairy cows using body mounted Inertial Measurement Units (IMUs) at multiple anatomical locations. The temporal parameters used are speed and non-speed normalized stance duration, bipedal and tripedal support durations, maximal protraction and retraction angles of the distal limbs and vertical displacement curves of the upper body. Gait analysis was performed by letting 17 dairy cows walk in a straight line at their own chosen pace while equipped with IMU sensors on tubera sacrale, left and right tuber coxae (LTC and RTC), back, withers, head, neck and all four lower limbs. Data intervals with stride by stride regularity were selected based on video data. For temporal parameters, the median was calculated and 95% confidence intervals (CI) were estimated based on linear mixed model (LMM) analysis, while for limb and vertical displacement curves, the median and most typical curves were calculated. The temporal parameters and distal limb angles showed consistent results with low variance and LMM analysis showed non-overlapping CI for all temporal parameters. The distal limb angle curves showed a larger and steeper retraction angle range for the distal front limbs compared with the hind limbs. The vertical displacement curves of the sacrum, withers, LTC and RTC showed a consistent sinusoidal pattern while the head, back and collar curves were less consistent and showed more variation between and within cows. This kinematic description might allow to objectively differentiate between normal and lame gait in the future and determine the best anatomical location for sensor attachment for lameness detection purposes.
Subject(s)
Cattle/physiology , Gait/physiology , Walking/physiology , Animals , Biomechanical Phenomena , Female , Lameness, Animal/diagnosis , Lameness, Animal/physiopathology , Wearable Electronic Devices/veterinaryABSTRACT
This study assessed the slip resistance of different types of solid flooring in cattle housing using a range of technical tests and gait analysis. Dynamic and static coefficient of friction, skid resistance, and abrasiveness were tested on concrete flooring with a smooth finish, a grooved pattern, or a tamped pattern, acid-resistant mastic asphalt, soft rubber mats, and a worn slatted concrete floor. Coefficients of friction and skid resistance were tested under clean and slurry-soiled conditions. Linear kinematic variables were assessed in 40 cows with trackway measurements after the cows passed over the floors in a straight walk. All gait variables were assessed as deviations from those obtained on the slatted concrete floor, which was used as a baseline. The coefficient of friction tests divided the floors into 3 categories: concrete flooring, which had a low coefficient of friction (0.29-0.41); mastic asphalt flooring, which had medium values (0.38-0.45); and rubber mats, which had high values (0.49-0.57). The highest abrasion (g/10 m) was on the asphalt flooring (4.48), and the concrete flooring with a tamped pattern had significantly higher abrasiveness (2.77) than the other concrete floors (1.26-1.60). Lowest values on the skid-resistance tests (dry/wet) were for smooth concrete (79/35) and mastic asphalt (65/47), especially with a slurry layer on the surface. Gait analysis mainly differentiated floors with higher friction and abrasion by longer strides and better tracking. Step asymmetry was lower on floors with high skid-resistance values. The most secure cow gait, in almost every aspect, was observed on soft rubber mats. Relationships between gait variables and physical floor characteristics ranged from average to weak (partial correlations 0.54-0.16). Thus, none of the physical characteristics alone was informative enough to characterize slip resistance. With reference to gait analysis, the abrasiveness of the hard surfaces was more informative than the coefficient of friction, but the effect of pattern was better detected by skid-resistance measurements. Consequently, several physical characteristics are needed to objectively describe the slip resistance of cattle floors. Soft rubber mats gave better tracking than hard, solid floors, even with a grooved surface or a tamped pattern.
Subject(s)
Behavior, Animal/physiology , Cattle , Floors and Floorcoverings , Gait , Animals , Cattle/physiology , Female , Housing, Animal , Rubber , WalkingABSTRACT
In freestall systems, cows are frequently moved among pens and regrouped. This practice involves mixing unfamiliar cows, and can result in changes in stocking density after regrouping. Both regrouping and changes in stocking density can affect cow welfare, but no study to date has assessed the combined effects. The aim of this study was to test if reductions in stocking density can mitigate the responses to regrouping. By manipulating group size (6 vs. 12 cows) and pen size (12 vs. 24 stalls), 3 different stocking densities were created (25, 50, and 100%). Four groups of Holstein cows were regrouped weekly for 4 wk and the stocking density changed at regrouping. The change in density varied as follows: a decrease by a factor of 4 (100 to 25%), a decrease by a factor of 2 (100 to 50% or 50 to 25%), no change (50 to 50%), an increase by a factor of 2 (25 to 50% or 50 to 100%), and an increase by a factor of 4 (25 to 100%). Displacements at the feeding area, feeding time, and lying time were scored. The daily means for each group were used to calculate the differences in responses from 1d before to 1d after each regrouping. The number of displacements at the feed bunk decreased and lying time increased when stocking density decreased at regrouping. In conclusion, increases in competitive behavior and the associated decrease in lying times can be mitigated by reducing stocking density when regrouping dairy cows.
Subject(s)
Dairying/methods , Housing, Animal , Animals , Behavior, Animal/physiology , Cattle , Competitive Behavior/physiology , Female , MilkABSTRACT
The purpose was to determine the effects of the physical dimensions of the pen and group size and stocking density on cow activity. Cows (randomly assigned to 4 groups of 6 animals each) were tested in pens with 24 or 12 lying places and in groups with 12 or 6 cows. All groups were tested in each of the 4 treatments with treatment order allocated using a 4 × 4 Latin square. The distance moved and the number of movements were calculated using 5-min scan sampling of video recordings over a 48-h period. Time spent lying down, number of lying bouts, and the duration of each lying bout were recorded using activity sensors. Displacements at the feed bunk were assessed by continuous analysis of video for 3h after the delivery of the fresh feed in the afternoon. Cows moved greater distances when kept in a large versus small pens (330.2 vs. 270.1 ± 11.6 m/d; mean ± SE), irrespective of group size. Cows moved more often when kept in the larger pen (21.3 vs. 19.2 ± 0.63% of scans). The time spent lying down decreased when density increased (59.1 vs. 55.8 ± 2.3% of scans at 25% and 100% stocking, respectively). Treatment had no effect on the number of displacements at the feed bunk. Physical dimensions of the pen play an important role in how much cows move, and stocking density affects lying time.
Subject(s)
Dairying/methods , Housing, Animal , Motor Activity , Animals , Cattle , Female , Population Density , Time FactorsABSTRACT
The effect of different flooring surfaces in walking and standing areas on claw conformation, claw horn growth, and wear was studied in 2 experiments during 2 consecutive housing seasons in a research dairy herd of 170 cows. In experiment 1, the flooring systems tested were solid rubber mats, mastic asphalt with and without rubber-matted feed-stalls, and aged concrete slats. In experiment 2, slatted concrete flooring was compared with slatted rubber flooring. The cows were introduced to the respective flooring systems in early lactation and their claws were trimmed before the exposure period. Toe length, toe angle, sole concavity, and claw width, as well as claw growth and wear rates were recorded for lateral and medial claws of the left hind limb. Claw asymmetry calculations were based on these claw measurements and on differences in sole protrusion between lateral and medial soles. Asphalt floors caused shorter toe length and steeper toe angle. They also increased wear on rear claws (5.30 +/- 0.31 and 5.95 +/- 0.33 mm/mo for lateral and medial claw, respectively; LSM +/- SE) and horn growth rate (5.12 +/- 0.36 and 5.83 +/- 0.31 mm/mo of lateral and medial claws, respectively). Rubber mats instead of asphalt in walking areas reduced wear (1.36 +/- 0.19 and 2.02 +/- 0.20 mm/mo for lateral and medial claw, respectively) and claw growth (3.83 +/- 0.23 and 3.94 +/- 0.17 mm/mo for lateral and medial claw, respectively). Rubber-matted feed-stalls together with asphalt walkways decreased claw wear (3.29 +/- 0.31 and 4.10 +/- 0.32 mm/mo for lateral and medial claw, respectively). The concavity of claw soles was reduced on asphalt, especially in the lateral rear claws. Rubber matting in feed-stalls prevented loss of sole concavity compared with asphalt. Claw asymmetry did not differ between flooring systems. While different access to abrasive flooring affected claw conformation, there was no evidence that flooring system influenced the disproportion between lateral and medial claws.
Subject(s)
Cattle/anatomy & histology , Dairying/instrumentation , Floors and Floorcoverings/standards , Hoof and Claw/anatomy & histology , Animals , Cattle/growth & development , Dairying/methods , Female , Hoof and Claw/growth & development , Housing, Animal/standards , Lower Extremity , Random AllocationABSTRACT
The aim was to describe the clinical orthopedic implications of oligofructose overload. A group of 8 nonpregnant dairy heifers were given an oral dose of oligofructose (17 g/kg of body weight). At predefined times during a period spanning 3 d before and 9 d after oligofructose overload, the heifers underwent a clinical examination including locomotion scoring, hoof-testing, and palpation of tarso-crural joints, as well as the collection of blood and ruminal fluid samples. Locomotion sessions were videotaped; subsequently, locomotion was blind-scored. Locomotion scores increased after oligofructose overload and declined toward the end of the study period. The greatest locomotion scores were recorded on d 3 to 5 (60 to 120 h) where 12 of 42 (29%) locomotion scores were 3 and 13 of 42 (32%) were score 2. Positive reactions to hoof-testing were observed from 30 h after oligofructose overload and reached a maximum on d 7 and 9 where 12 of 28 (43%) reactions were marked positive. Distension of the tarso-crural joints was observed from 24 h after oligofructose overload, with maximum distension being observed on d 2, in which 44 of 56 (79%) of observed joints were either moderately or severely distended. The heifers developed classic signs of acute ruminal and systemic acidosis after the oligofructose overload (ruminal pH 4.3 +/- 0.07, standard base excess -10.8 +/- 2.3 at 18 h). With few exceptions, clinical and laboratory variables returned to normal within 9 d of oligofructose overload. But, good body condition and previous feeding with grass apparently predisposed the heifers to more severe systemic affection. Oligofructose overload in dairy heifers induced ruminal and systemic acidosis, diarrhea, dehydration, and, subsequently, lameness, claw pain, and joint effusion, collectively interpreted as signs of acute laminitis. Oligofructose overload at 17 g/kg of body weight represented a relatively mild laminitis model in cattle, as demonstrated by a reasonably quick recovery from systemic as well as orthopedic signs.
Subject(s)
Cattle Diseases/chemically induced , Lameness, Animal/chemically induced , Locomotion/drug effects , Oligosaccharides/pharmacology , Animals , Cattle , Female , Gastrointestinal Contents/chemistry , Gastrointestinal Contents/drug effects , Heart Rate/drug effects , Hematocrit/veterinary , Hoof and Claw/pathology , Joints/pathology , Locomotion/physiology , Pregnancy , Rumen/drug effects , Rumen/metabolism , Time Factors , Video RecordingABSTRACT
The variability in dairy cow gait characteristics, determined by measurements of footprints (trackway measurements), was analysed. Seven gait parameters were determined from 32 non-lame dairy cows during free-speed walking on a slatted concrete walkway. The footprints were revealed by application of a thin lime powder-slurry layer to the walkway surface. The cows were observed on two test occasions with a 3-week interval, with measurements from four consecutive strides used within each test session. The variance components for cow, test and cow-test interaction were estimated by a residual (restricted) maximum likelihood method. The percentage of each variance component was calculated to assess the relative impact of each factor on total variance. Between-test variation was generally low, suggesting that cows maintain the same average gait pattern, at least over a 3-week period. The proportion of within-test variation was considerable for most trackway measurements. Stride length, step angle, step width and tracking (overlap) showed low to moderate within-test variation (12% to 27%), whereas for mediolateral displacement of rear feet and step length it was rather high (54% and 62%, respectively). Within-test variation in step asymmetry was very high (77%), suggesting the occurrence of natural, non-systematic changes in inter-limb coordination in non-lame cows. For better understanding the gait pattern in non-lame cows, linear associations between the trackway measurements and with body size were assessed. It was concluded that trackway measurements were able to describe the gait pattern in walking cows under dairy farm conditions. However, considering the relatively high within-test variation in gait, several strides should be used to obtain a representative gait pattern.
ABSTRACT
Weight and pressure distribution on the claw were studied in Swedish Holsteins housed in different flooring systems. A total of 127 cows housed in different sections of the experimental barn were used. Each section had different flooring in the walking and standing areas. There were rubber mats or abrasive mastic asphalt flooring on the alleys or a low-abrasive slatted concrete floor. Some sections had feed-stalls equipped with rubber mats; other sections did not. The vertical ground reaction force, contact area, and average contact pressure were determined on the left hind foot using the I-Scan system and analyzed with the F-scan system. These determinations were made in each of the following 3 zones of the claw: bulb, wall, and sole. Most of the weight on claws exposed to concrete floors was carried by the bulb (37.4 +/- 3.5 and 18.3 +/- 2.9% of weight exerted on the foot in the lateral and medial claw, respectively) and the wall zone (20.0 +/- 2.6 and 13.4 +/- 2.4% on lateral and medial claw, respectively). The weight and pressure distribution in cows kept on sections with rubber covered alleys but passing daily over the asphalt floor on their way to the milking parlor did not differ in any zones, except for lateral bulbs, compared with those exposed to slatted concrete alone. Still, the weight bearing of the sole zone in cows kept on rubber mats without access to asphalt was less than that of cows kept on concrete slatted floors (5.1 +/- 0.7 vs. 12.7 +/- 1.1% and 1.1 +/- 0.5 vs. 8.7 +/- 0.7% in lateral and medial claws, respectively). In cows kept on asphalt flooring without feed-stalls, most weight was exerted to the sole zone (36.2 +/- 2.9 and 22.2 +/- 1.8% in lateral and medial claws, respectively). Feed-stalls in combination with asphalt flooring yielded a decreased total contact area (30.1 +/- 1.2 cm(2)) compared with asphalt floors without feed-stalls (35.7 +/- 1.2 cm(2)). The largest total contact area was obtained on the asphalt floor without feed-stalls, resulting in a lower contact pressure (39.8 +/- 2.3 N/cm(2)) than in claws exposed to concrete (66.0 +/- 2.7 N/ cm(2)) or rubber mats (56.7 +/- 1.7 N/cm(2)). In conclusion, housing with abrasive floors resulted in claws with increased contact area at the sole surface and therefore, decreased contact pressure, but reduced the weight-bearing role of the strongest part of the claw capsule, the claw wall.
Subject(s)
Cattle/physiology , Floors and Floorcoverings/instrumentation , Hoof and Claw/physiology , Housing, Animal , Animals , Biophysical Phenomena , Biophysics , Body Weight , Female , Lactation , Linear Models , Pressure , Rubber , Weight-BearingABSTRACT
Concrete is the most commonly used alley flooring in confined dairy herds because of its qualities of construction and ease of cleaning. Nevertheless, the hardness, abrasiveness, and slipperiness of concrete floors have adverse effects on animal well-being and health, and yielding rubber flooring is becoming popular as a way of improving the flooring conditions on walkways. The aim of this study was to investigate preferences of dairy cows for rubber compared with concrete flooring under the conditions of a commercial dairy farm. The study was conducted in an organic dairy herd with free-stall housing. Floor preference was tested on groups of standing cows in a 120-m2 holding pen before milking, and 1 yr later on a 12- x 3-m walkway. The holding pen and the walkway were divided lengthwise into 2 identical sections. Two types of solid rubber mats (soft and extra soft) were tested against solid concrete in the holding pen. Slatted and solid rubber mats were tested against slatted concrete in the walkway. Each floor type was tested over 4 d on the left side and 4 d on the right side of the holding pen and the walkway, respectively. Concrete flooring on both sides of the sections was tested as a control before the testing of different section materials. All observations of the distribution of cows in the sections were made from video recordings captured in association with the afternoon milking. The number of cows on each section was recorded approximately every 7 min in the holding pen, and continuously on the walkway. A significantly higher proportion of cows stood on the side with the soft and extra soft rubber mats (65.1 +/- 2.7 and 69.3 +/- 2.6%, respectively, mean +/- SEM) compared with the control distribution when only the solid concrete was available (50.9 +/- 3.9%). A significantly higher proportion of nonlame cows walked exclusively on the side with the slatted (64.5 +/- 5.4%, d 4) or solid rubber mats (68.2 +/- 5.1%, d 4) compared with controls (28.9 +/- 4.3%). Lame cows within a group of walking cows did not show a higher preference for soft flooring as distinct as nonlame cows (52.7 +/- 6.9 and 59.4 +/- 6.2% for the solid and slatted rubber mats, respectively, at d 4 vs. 40.3 +/- 6.2% for control), presumably because of competition with other, higher ranked cows. It was concluded that the majority of cows preferred to walk and stand on soft rubber rather than on concrete flooring.