Molybdenum Disulfide Nanoribbons with Enhanced Edge Nonlinear Response and Photoresponsivity.

MoS2 nanoribbons have attracted increased interest due to their properties, which can be tailored by tuning their dimensions. Herein, the growth of MoS2 nanoribbons and triangular crystals formed by the reaction between films of MoOx (2

Spatially-Localized Functionalization on Nanostructured Surfaces for Enhanced Plasmonic Sensing Efficacy.

This work demonstrates the enhancement in plasmonic sensing efficacy resulting from spatially-localized functionalization on nanostructured surfaces, whereby probe molecules are concentrated in areas of high field concentration. Comparison between SERS measurements on nanostructured surfaces (arrays of nanodisks 110 and 220 nm in diameter) with homogeneous and spatially-localized functionalization with thiophenol demonstrates that the Raman signal originates mainly from areas with high field concentration. TERS measurements with 10 nm spatial resolution confirm the field distribution profiles predicted by the numerical modeling. Though this enhancement in plasmonic sensing efficacy is demonstrated with SERS, results apply equally well to any type of optical/plasmonic sensing on functionalized surfaces with nanostructuring.

Nanometer-Scale Uniform Conductance Switching in Molecular Memristors.

One common challenge highlighted in almost every review article on organic resistive memory is the lack of areal switching uniformity. This, in fact, is a puzzle because a molecular switching mechanism should ideally be isotropic and produce homogeneous current switching free from electroforming. Such a demonstration, however, remains elusive to date. The reports attempting to characterize a nanoscopic picture of switching in molecular films show random current spikes, just opposite to the expectation. Here, this longstanding conundrum is resolved by demonstrating 100% spatially homogeneous current switching (driven by molecular redox) in memristors based on Ru-complexes of azo-aromatic ligands. Through a concurrent nanoscopic spatial mapping using conductive atomic force microscopy and in operando tip-enhanced Raman spectroscopy (both with resolution <7 nm), it is shown that molecular switching in the films is uniform from hundreds of micrometers down to the nanoscale and that conductance value exactly correlates with spectroscopically determined molecular redox states. This provides a deterministic molecular route to obtain spatially homogeneous, forming-free switching that can conceivably overcome the chronic problems of robustness, consistency, reproducibility, and scalability in organic memristors.

Probing the nanoscale light emission properties of a CVD-grown MoS2 monolayer by tip-enhanced photoluminescence.

Two-dimensional transition metal dichalcogenides are gaining increasing interest due to their promising optical properties. In particular, molybdenum disulfide (MoS2) which displays a band-gap change from indirect at 1.29 eV for bulk materials to direct at 1.8 eV for the material monolayer. This particular effect can lead to a strong light interaction which can pave the way for a new approach to the next generation of visible light emitting devices. In this work we show the nanoscale variation of light emission properties by tip-enhanced photoluminescence microscopy and spectroscopy in the MoS2 monolayer, grown by chemical vapour deposition. The variations of the light emission properties are due to different effects depending on the shape of the MoS2 single layer, for instance, a different concentration of point defect in an irregularly shaped flake and the presence of a nanoscale terrace in a triangular monolayer. Simultaneously, atomic force microscopy reveals indeed the presence of a nanometric terrace, composed of an additional layer of MoS2, and tip-enhanced PL intensity imaging shows a localized intensity decrease.

Detection of negative ions in glow discharge mass spectrometry for analysis of solid specimens.

A new method is presented for elemental and molecular analysis of halogen-containing samples by glow discharge time-of-flight mass spectrometry, consisting of detection of negative ions from a pulsed RF glow discharge in argon. Analyte signals are mainly extracted from the afterglow regime of the discharge, where the cross section for electron attachment increases. The formation of negative ions from sputtering of metals and metal oxides is compared with that for positive ions. It is shown that the negative ion signals of F(-) and TaO(2)F(-) are enhanced relative to positive ion signals and can be used to study the distribution of a tantalum fluoride layer within the anodized tantala layer. Further, comparison is made with data obtained using glow-discharge optical emission spectroscopy, where elemental fluorine can only be detected using a neon plasma. The ionization mechanisms responsible for the formation of negative ions in glow discharge time-of-flight mass spectrometry are briefly discussed.

Pulsed radiofrequency glow discharge time-of-flight mass spectrometry for molecular depth profiling of polymer-based films.

We demonstrate the potential of an innovative technique, pulsed radiofrequency glow discharge time-of-flight mass spectrometry, for the molecular depth profiling of polymer materials. The technique benefits from the presence, in the afterglow of the pulsed glow discharge, of fragment ions that can be related to the structures of the polymers under study. Thin films of different polymers (PMMA, PET, PAMS, PS) were successfully profiled with retention of molecular information along the profile. Multilayered structures of the above polymers were also profiled, and it was possible to discriminate among layers having similar elemental composition but different polymer structure.

The Au(n) cluster probe in secondary ion mass spectrometry: influence of the projectile size and energy on the desorption/ionization rate from biomolecular solids.

A Au-Si liquid metal ion source which produces Au(n) clusters over a large range of sizes was used to study the dependence of both the molecular ion desorption yield and the damage cross-section on the size (n = 1 to 400) and on the kinetic energy (E = 10 to 500 keV) of the clusters used to bombard bioorganic surfaces. Three pure peptides with molecular masses between 750 and 1200 Da were used without matrix. [M+H](+) and [M+cation](+) ion emission yields were enhanced by as much as three orders of magnitude when bombarding with Au(400) (4+) instead of monatomic Au(+), yet very little damage was induced in the samples. A 100-fold increase in the molecular ion yield was observed when the incident energy of Au(9) (+) was varied from 10 to 180 keV. Values of emission yields and damage cross-sections are presented as a function of cluster size and energy. The possibility to adjust both cluster size and energy, depending on the application, makes the analysis of biomolecules by secondary ion mass spectrometry an extremely powerful and flexible technique, particularly when combined with orthogonal time-of-flight mass spectrometry that then allows fast measurements using small primary ion beam currents.

Matrix-implanted laser desorption/ionization mass spectrometry.

The implantation of low-velocity massive gold clusters is shown to be a method of choice for homogeneous incorporation of a metallic matrix into the near-surface region of a solid biopolymer for subsequent laser desorption/ionization (LDI) MS analysis. Matrix implanted (MI)LDI spectra from cluster-implanted pure test peptide or tissue exhibit molecular ion peaks similar to those observed by matrix-assisted LDI. Moreover, the ion emission is very reproducible from any spot on the surface of these test samples. MILDI promises to be a powerful technique for mass spectrometric analysis of native biological samples as demonstrated by the first results on rat brain tissues.

Orthogonal time-of-flight secondary ion mass spectrometric analysis of peptides using large gold clusters as primary ions.

Secondary ion mass spectrometry (SIMS) for biomolecular analysis is greatly enhanced by the instrumental combination of orthogonal extraction time-of-flight mass spectrometry with massive gold cluster primary ion bombardment. Precursor peptide molecular ion yield enhancements of 1000, and signal-to-noise improvements of up to 20, were measured by comparing SIMS spectra obtained using Au(+) and massive Au(400) (4+) cluster primary ion bombardment of neat films of the neuropeptide fragment dynorphin 1-7. Remarkably low damage cross-sections were also measured from dynorphin 1-7 and gramicidin S during prolonged bombardment with 40 keV Au(400) (4+). For gramicidin S, the molecular ion yield increases slightly as a function of Au(400) (4+) beam fluence up to at least 2 x 10(13) Au(400) (4+)/cm(2). This is in marked contrast to the rapid decrease observed when bombarding with ions such as Au(5) (+) and Au(9) (+). When gramicidin S is impinged with Au(5) (+), the molecular ion yield decreases by a factor of 10 after a fluence of only 8 x 10(12) ions/cm(2). Comparison of these damage cross-sections implies that minimal surface damage occurs during prolonged Au(400) (4+) bombardment. Several practical analytical implications are drawn from these observations.