Effect of derivatization method (KOH and BF3) on fatty acid profile data of boiled Tetracarpidium conophorum, and egusi pudding oils.

Fatty acids are present in many foods, either free or esterified. Their presence helps to characterize and classify the food. The nature of these fatty acids is also associated with the treatments applied. To assess the fatty acid profile of these matrices, extractions are carried out using different solvents that influence the nature and lipid profile. The subsequent derivatization of fatty acids to more volatile fatty acyl methyl esters (FAMEs) prior to determination of the fatty acid profile takes into account the nature of the extraction solvent. Thus, the present work proposes to determine the fatty acid profile by Gas Chromatography Flame Ionisation Detector (GC-FID) of two lipid extracts derivatized by the MeOH/KOH and Hexane/MeOH/MeOH-BF3 procedures. Freshly harvested Tetracarpidium conophorum nuts from fields in the Fombap locality were brought to the laboratory where they were boiled (95 °C; 30 min), shelled, cut into small cubes and dried for 48 h at 45 °C. The dried seeds were ground and the resulting paste macerated in hexane for 48 h. The liquid fraction obtained was concentrated using a rotavapor, and the lipid extracts were stored at -15 °C. The egusi pudding was obtained by mixing 100 g of egusi seed paste with 0.50 g of white Piper nigrum powders, then packed in bulrush leaves and steamed for 120 min. After cooking, the product was stored for 4 days at room temperature and reheated twice a day. At the end of the last day, the lipid fraction oil was extracted following the methodology of Bligh and Dyer [1], then concentrated and preserved as before. The lipid extracts were then methylated using MeOH/KOH and Hexane/MeOH/MeOH-BF3 methods before injection into a GC-FID equipped with a Stabil Wax®-DA column. Supelco's standard mix of 37 FAMEs was used to identify and quantify the fatty acids present in the various samples. The results obtained enable us to identify the different fatty acids according to the retention time of their corresponding FAMEs and to quantify them. The fatty acids obtained were classified as saturated and unsaturated (mono and polyunsaturated). These analyses showed that the rapid derivatization method (MeOH/KOH) identified the same number of fatty acids as the Hexane/MeOH/MeOH-BF3 method in the lipid extract from the egusi pudding, whereas the Hexane/MeOH/MeOH-BF3 method identified four more fatty acids in the lipid extract coming from Tetracarpidium conophorum. Although the number of fatty acids was similar, the derivatization method influenced the nature of the fatty acids in the egusi pudding lipid extract. Overall, polyunsaturated fatty acids were the most abundant in the different oils. Omega-3 were the majority subclass in Tetracarpidium conophorum nuts, while omega-6 were in egusi pudding. The derivatization method did not influence the majority fatty acid (alpha linolenic) in Tetracarpidium conophorum nuts, whereas derivatization with BF3 gave trans linoleic and KOH cis linoleic in egusi pudding. These results show that the choice of derivatization method for fatty acid profiling and quantification is very important and depends on the technique and extraction solvents used.

Effect of variety and malting conditions on proteolytic activity, free amino nitrogen, and soluble protein contents of two maize varieties (Atp-Y and Coca-sr): amylolytic activity and physico-chemical and functional properties of optimal sample.

Introduction: The utilization of sprouted meals in beer production and enhancing the physicochemical properties of supplementary foods is widespread in Africa. This work aimed to determine the influence of soaking, germination, maturation and variety conditions on the physicochemical properties, proteolytic activity, free amino nitrogen (FAN) and soluble protein contents of Coca-sr and Atp-Y maize varieties. Methods: To achieve this, the central composite design (CCD) was used for the optimization of five parameters, namely soaking time (18-42 h), plant salt concentration (0.5-1.2%), soaking temperature (25-41°C), sprouting time (80-195 h) and ripening time (17.50-42 h), and following dependent variables were investigated: proteolytic activity, FAN content and soluble protein. Optimal samples flours obtained were then subsequently subjected to physicochemical and functional analysis. Results: The analysis of results showed that the linear, interactive and quadratic effects of the factors significantly (p<0.05) affected the proteolytic activity, FAN and soluble protein contents of both varieties. The direction of each factor's variation and its effects were not similar in the two varieties. The optimal malting conditions were 7.31 h soaking with 1.678% vegetable salt at a temperature of 34.65°C followed by sprouting for 245.59 h and maturation for 0.765 h for the Atp-Y variety. For the Coca-sr variety, it requires 1.608 h of soaking with 1.678% vegetable salt at a temperature of 51.93°C followed by 273.94 h and 58.73 h for sprouting and ripening time respectively. The meals of Coca-sr produces using these optimal conditions showed a significantly (p<0.05) higher proteolytic activity, FAN and soluble protein content. The amylolytic activity was more pronounced in the Atp-Y variety, as was the content of essential amino acids. The above optimal conditions reduced the content of anti-nutrients (phytates, saponins, oxalates, condensed and hydrolysable tannins), improved the availability of minerals (Ca and Mg), reduced the pH, mass density, water retention capacity and swelling rate. Conclusion: As a result, the optimal flours of these two maize varieties could be applied in the formulation of supplementary foods, bakery products and beer by industrialists.

The phytochemical profiling, pharmacological activities, and safety of malva sylvestris: a review.

Malva sylvestris is a plant commonly found in Europe, Asia, and Africa. The leaves and flowers of this plant have been used for centuries in traditional medicine to treat various ailments such as cough, cold, diarrhoea, and constipation. Google Scholar, PubMed, Scopus, and Web of Science were used to search for relevant material on the phytochemical profiling and pharmacologic activities of Malva sylvestris. The techniques used in phytochemical profiling and the pharmacologic activity of each compound were extracted from the included studies, including in vitro, in vivo, and clinical studies. The phytochemical analysis of Malva sylvestris revealed that the leaves and flowers are the most commonly used parts of the plant and contain various bioactive compounds such as flavonoids, mucilages, terpenoids, phenol derivatives, coumarins, sterols, tannins, saponins, and alkaloids. These phytochemicals are responsible for the many pharmacological activities of Malva sylvestris, such as anti-inflammatory, antimicrobial, hepatoprotective, laxative, antiproliferative and antioxidant properties. This review has presented an overview of the antinociceptive and anti-inflammatory activities and the cytotoxic effects of Malva sylvestris on different types of cancer cells. It has also summarised the work on developing copper oxide nanoparticles using Malva sylvestris leaf extract and its potential use in food and medicine. This review aims to highlight the traditional uses, phytochemistry, pharmacological activities, and safety of Malva sylvestris.

Optimisation of the production of corn amylase flour from corn Atp and Kassaï varieties for the fluidification and energy density increase of cassava gruel.

The energy density of the complementary gruels can be increased by the use of sprouted flours. This led us to determine the conditions for obtaining and using sprouted corn flour for optimal fluidification of fermented cassava flour gruels. To do this, the germinated corn flour (GCF) varieties Atp and Kassaï was produced according to the response surface methodology and the Doehlert plan was used with factors such as soaking (12-48 h) and germination (24-96 h) times. Once obtained, these GCF were used to increase the energy density of cassava flour gruels with flow velocity as response. The Doehlert plan was also used with fermented cassava flour concentration (17.5-30 %) and optimised sprouted corn flour mass (1-5 g) as factors. The experimental design that had been performed indicated that the effectiveness of corn amylase flour to fluidify the gruels depends not only to the conditions of production (soaking and germination) (p < 0.05) but also their incorporation during the preparation (corn amylase-fermented cassava flour) (p < 0.05). The rich corn amylase flour can be obtained by soaking Kassaï and Atp varieties for 20 h and 28 h respectively and germinated for 90.82 h. Application of these GCF during the preparation of fermented cassava flour gruels has shown that to obtain gruels with flow velocities between 100-160 mm/30s, it was necessary to couple 1.16 g of sprouted corn flour variety Kassaï for 26.23 % of fermented cassava flour and 1.12 g of corn flour variety Atp for 25.94 % of fermented cassava flour. The use of these couples has made it possible to multiply the energy density of the gruels by 6.55 and 6.49, respectively. In view of these results, it is therefore advisable to use the germinated corn flours produced under the conditions obtained to fluidise and increase the energy density of the fermented cassava gruels.

Effect of bleaching and variety on the physico-chemical, functional and rheological properties of three new Irish potatoes (Cipira, Pamela and Dosa) flours grown in the locality of Dschang (West region of Cameroon).

Enzymatic browning, which usually occurs during irish potato tuber processing, causes deterioration in the nutritional, functional, physical and acceptability quality of the products derived from this matrix. To fight against this phenomenon, several treatment methods have been developed, such as bleaching. This led us to investigate the effect of bleaching on the physico-chemical, functional and rheological properties of three irish potato varieties. To achieve our objective, blanched and unbleached irish potatoes flours of three varieties (Cipira, Dosa and Pamela) were produced. The physico-chemical, functional and rheological aspects of the flours were then studied according to standard and developped methods. It appears from this study that treatment and variety significantly influenced (P < 0.05) the nutritional composition of irish potatoes flours. The physical properties with the exception of titratable acidity were affected (P < 0.05) by the treatment and the varieties. Analysis of the functional properties revealed that unbleached flours had a higher swelling rate and water retention capacity than bleached flours. Rheological properties, such as final viscosity, are influenced by the treatment and variety. The main component analysis showed that bleaching affects the properties of the varieties Pamela and Cipira. In view of all this, we can therefore highlight the applicability of each of the flours in a specific industrial field.