Highly sensitive lateral flow immunoassays based on Ag@Au nanoflowers with marine medaka (Oryzias melastigm) vitellogenin as a target analyte.

In order to improve the sensitivity of lateral flow immunoassays (LFIAs) for the detection of piscine vitellogenin (Vtg), a well-established biomarker for environmental estrogens, Au coated Ag nanoflowers (Ag@Au NFs) were used as labeling probes to develop a LFIA for marine medaka Vtg. The synthesized Ag@Au NFs with good monodispersity had an average diameter of 44.1 nm and absorbance peak of 524 nm. When the concentration of goat anti-mouse IgG and anti-Vtg polyclonal antibody (anti-Vtg PAbs) were 1.3 and 0.4 mg/mL, respectively, the detection range of the LFIA was 0.19-25 ng/mL, and the visual detection limit was 0.1 ng/mL, which was approximately 80 times lower than that of LFIAs based on other nanoparticles (Au NPs, Ag NPs, Au NFs, and FM). After evaluation of its specificity and robustness, the usefulness of Ag@Au NFs labeled LFIA was validated by measuring Vtg induction in the plasma of marine medaka exposed to bisphenol A, a weak estrogenic chemical. This highly sensitive lateral flow immunoassay could detect Vtg biomarker within 15 min without the need of expensive and complicated instruments, and thus offered an ultrasensitive and robust on-site detection method for estrogenic activity in field environment.

A novel electrochemical aptasensor for ultrasensitive detection of herbicide prometryn based on its highly specific aptamer and Ag@Au nanoflowers.

Herbicide prometryn has become a common pollutant in aquatic environments and caused adverse impacts on ecosystems. This study developed an ultrasensitive electrochemical aptasensor for prometryn based on its highly affinitive and specific aptamer and Ag@Au nanoflowers (Ag@AuNFs) for signal amplification. Firstly, this study improved the Capture-SELEX strategy to screen aptamers and obtained aptamer P60-1, which had a high affinity (Kd: 23 nM) and could distinguish prometryn from its structural analogues. Moreover, the typical stem-loop structure in aptamer P60-1 was found to be the binding pocket for prometryn. Subsequently, an electrochemical aptasensor for prometryn was established using multiwalled carbon nanotubes and reduced graphene oxide as electrode substrate, Ag@Au NFs as signal amplification element, and aptamer P60-1 as recognition element. The aptasensor had a detection range of 0.16-500 ng/mL and a detection limit of 60 pg/mL, which was much lower than those of existing detection methods. The aptasensor had high stability and good repeatability, and could specifically detecting prometryn. Furthermore, the utility of the aptasensor was validated by measuring prometryn in environmental and biological components. Therefore, this study provides a robust and ultrasensitive aptasensor for accurate detection for prometryn pollution.