ABSTRACT
In this study, we proposed a two-staged, transparent, planar solar concentrator composed of stacked waveguide sheets with an arc-segment structure array and movable receiving assemblies, which operated in a hybrid tracking approach. The stacked waveguide sheets carrying the arc-segment structures as TIR collectors could provide high concentration ratios and coupling efficiency with wide angular tolerance in the first stage. The following movable receiving assembly composed of light guide channels (LGCs) and compound parabolic collectors (CPCs) laterally slid according to the incidence angles to receive the earlier concentrated light for further concentration and provide the PV cells on the ends of CPCs with uniform irradiance in the second stage. The simulation results demonstrated that the optimal model could provide an average efficiency of 0.87, an average uniformity of 0.875, and an average concentration ratio of 738 over a whole year regarding the light source with AM 1.5D wavelengths in the working range of PV cells.
ABSTRACT
We present a method of designing a light-emitting diode (LED) luminaire for non-Lambertian road surfaces, in which we optimized the overlap between the lighting areas of a luminaire and its adjacent luminaires to attain balance between uniformity of luminance and illuminance. The goal of the balance is to approach highly uniform luminance and raise illuminance uniformity as high as possible. The optimal illuminance rendered by a single luminaire and the corresponding far-field intensity were derived from the optimal overlap condition, and, thus, the optical model was established. The performance of the model is as follows: overall uniformity of luminance (UO) is 0.91, longitudinal uniformity of Luminance (UL) is 0.92, threshold increment (TI) is 1.64%, uniformity of horizontal illuminance (UHE) is 0.66, and surround ratio (SR) is 0.52. Finally, a compact freeform lens capping an LED was constructed to realize the optical model. The performance of the luminaire designed with arrayed units of an LED capped by the freeform lens is as follows: UO is 0.80, UL is 0.85, TI is 3.57%, UHE is 0.56, and SR is 0.51. In addition, the luminaire provides 19,600 lumens of luminous flux, of which 68% and 54% are projected on the target area and roadway alone, respectively, while 27% is absorbed by the surrounding materials.
ABSTRACT
This study proposes a slim planar apparatus that can function as a color-separation backlight for the color-filter-free liquid-crystal display (LCD) system. It has a two-level folded configuration comprising a composite light-guide plate (LGP) and light-emitting diode (LED) couplers. The LED couplers generate the highly collimated beams of the three primaries (R, G, and B) that enter the composite LGP at their separate angles; then the three primaries were uniformly extracted out of the top surface of the LGP at their respective angles differing in the longitudinal direction. In the simulation, a lenticular lens array was used to focus the three primaries onto their respective subpixels; each pixel of the LC panel comprised three subpixels, identical to the traditional layout. The proposed apparatus can be applied in backlight modules with a maximal diagonal dimension of 39 inches and a thickness of 15.5 mm. The simulation results indicated that the spatial uniformities of the three primaries ranged between 84% and 87%, the area of the color gamut of the LCD system was 99.5% of that defined by the National Television System Committee, and the total optical efficiency was 41%, as the double of a traditional LCD system. Thus, the proposed apparatus improved the total optical efficiency markedly and provided the LCD system with a wide color gamut.
ABSTRACT
This study proposes a slim planar apparatus for converting nonpolarized light from a light-emitting diode (LED) into an ultra-collimated linearly polarized beam uniformly emitted from its top surface. The apparatus was designed based on a folded-bilayer configuration comprising a light-mixing collimation element, polarization conversion element, and polarization-preserving light guide plate (PPLGP) with an overall thickness of 5 mm. Moreover, the apparatus can be extended transversally by connecting multiple light-mixing collimation elements and polarization conversion elements in a side-by-side configuration to share a considerably wider PPLGP, so the apparatus can have theoretically unlimited width. The simulation results indicate that the proposed apparatus is feasible for the maximal backlight modules in 39-inch liquid crystal panels. In the case of an apparatus with a 480 × 80 mm emission area and two 8-lumen LED light sources, the average head-on polarized luminance and spatial uniformity over the emission area was 5000 nit and 83%, respectively; the vertical and transverse angular distributions of the emitting light were only 5° and 10°, respectively. Moreover, the average degree of polarization and energy efficiency of the apparatus were 82% and 72%, respectively. As compared with the high-performance ultra-collimated nonpolarized backlight module proposed in our prior work, not only did the apparatus exhibit outstanding optical performance, but also the highly polarized light emissions actually increased the energy efficiency by 100%.
Subject(s)
Lenses , Lighting/instrumentation , Models, Theoretical , Refractometry/instrumentation , Semiconductors , Surface Plasmon Resonance/instrumentation , Computer Simulation , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Light , Scattering, Radiation , Surface PropertiesABSTRACT
This study proposed a planar solar concentrator featuring alignment-free total-internal-reflection (TIR) collectors and an innovative compound tracker. The compound tracker, combining a mechanical single-axis tracker and scrollable prism sheets, can achieve a performance on a par with dual-axis tracking while reducing the cost of the tracking system and increasing its robustness. The alignment-free TIR collectors are assembled on the waveguide without requiring alignment, so the planar concentrator is relatively easily manufactured and markedly increases the feasibility for use in large concentrators. Further, the identical TIR collector is applicable to various-sized waveguide slab without requiring modification, which facilitates flexibility regarding the size of the waveguide slab. In the simulation model, the thickness of the slab was 2 mm, and its maximal length reached 6 m. With an average angular tolerance of ±0.6°, and after considering both the Fresnel loss and the angular spread of the sun, the simulation indicates that the waveguide concentrator of a 1000-mm length provides the optical efficiencies of 62-77% at the irradiance concentrations of 387-688, and the one of a 2000-mm length provides the optical efficiencies of 52-64.5% at the irradiance concentrations of 645-1148. Alternatively, if a 100-mm horizontally staggered waveguide slab is collocated with the alignment-free TIR collectors, the optical efficiency would be greatly improved up to 91.5% at an irradiance concentration of 1098 (C(geo) = 1200X).
ABSTRACT
In this paper, we proposed a novel apparatus, which has very slim volume and can transfer light emitted from discrete LEDs into a uniform and ultra-collimated planar light source (UCPLS). This apparatus adopts the two-layer folded frame and two-stage CPC design so that thickness of the entire apparatus can be minimized; especially the feeder in the two-stage CPC design can greatly reduce the thickness of the CPC and make the light passing through the second-stage CPC become much more collimated. In addition, by side-by-side arrangement, a large-sized UCPLS can also be obtained. In our embodiment with an emitting area of the upper LGP of 280 mmX80 mm and a LED with optical flux of 8 lumens used as the light source, the performance according to the related simulation results shows as follows: angular FWHM of the resultant light emitted from the apparatus in the vertical and horizontal is 4.87 degrees and 24 degrees, respectively; spatial uniformity and total energy efficiency reach 84% and 69%, respectively; the average head-on luminance reaches up 5600 nit, yet this apparatus consumes just 60 mW. Furthermore, the results also demonstrate this design has potential to be applied to the product of 23 inches above while thickness of the entire apparatus is only 2.2 mm.
ABSTRACT
In this paper, we proposed a novel optical film 'Collimation Film with Equivalent Focal Reflective Aperture' (CFEFRA) that can collocate with the proper light guide plate (LGP) to provide a highly collimated planar light source (HCPLS) that not only has high intensity peak but also good uniformity. The CFEFRA has micro-cylindrical lenses and inverted-prism-like micro-teeth on its upper surface and lower surface, respectively. The lower micro-teeth that are aligned with the upper lenses can deflect the light emitting from the LGP at large declination into the normal, and then the deflected light with transverse fan-out is further converged by the upper lens to become the collimated light. The exact alignment between the upper and lower micro-structures is fulfilled by the method 'auto-secure-alignment by focusing of a collimated exposure beam'. The vertical and horizontal full width at half maximum (FWHM) of angular intensity of the HCPLS for the optimal case are of 14 and 6 degrees, respectively. Moreover, it still has high optical efficiency with light output of over 90% despite the resultant emitting light is such collimated. Most importantly, CFEFRA just needs to collocate with a relatively low-cost and easily-manufactured LGP so the HCPLS adopting the CFEFRA can be extended for large-sized application. Both optical model and experimental samples are demonstrated in this paper, and the simulation results are consistent with the experimental results. The consistency proves our design concept and optical model are convincible and feasible.
ABSTRACT
Volume holographic optical disc (VHOD) technology is simpler than the angular multiplexing holographic system. However, disc rotation usually causes pixel migration, thus reducing signal quality. This study proposes a special geometrical arrangement to counteract pixel migration. Using paraxial approximation analysis, an optimal geometrical distance ratio, K, is calculated to compensate for pixel migration and improve image quality during disc rotation. The results of approximation analysis are confirmed by both simulation and experimental results.
ABSTRACT
This study analyzes the characteristics of alumina (Al2O3)/water nanofluid to determine the feasibility of its application in an air-cooled heat exchanger for heat dissipation for PEMFC or electronic chip cooling. The experimental sample was Al2O3/water nanofluid produced by the direct synthesis method at three different concentrations (0.5, 1.0, and 1.5 wt.%). The experiments in this study measured the thermal conductivity and viscosity of nanofluid with weight fractions and sample temperatures (20-60°C), and then used the nanofluid in an actual air-cooled heat exchanger to assess its heat exchange capacity and pressure drop under laminar flow. Experimental results show that the nanofluid has a higher heat exchange capacity than water, and a higher concentration of nanoparticles provides an even better ratio of the heat exchange. The maximum enhanced ratio of heat exchange and pressure drop for all the experimental parameters in this study was about 39% and 5.6%, respectively. In addition to nanoparticle concentration, the temperature and mass flow rates of the working fluid can affect the enhanced ratio of heat exchange and pressure drop of nanofluid. The cross-section aspect ratio of tube in the heat exchanger is another important factor to be taken into consideration.
ABSTRACT
In this paper, a method is proposed for highly precisely simulating the optical behavior of a light guide plate, which has microstructures of rough texture and rugged edges thereon. By adopting the 'equivalent medium-immersed measurement' to establish precise optical characteristic of the light guide plate, the simulated results of luminance distribution are much accordant with experimental measurement. This method will be useful in luminance uniformity evaluation and hot-spot check in advance, and it will greatly contribute to save time and cost of product development.
ABSTRACT
An out-of-plane angular detection scheme with random phase encoding is proposed. A ground glass is attached on a rod, which is rotated around a center point, so that the rotation of the rod induces the displacement of the ground glass in a circular path. To enhance the rotational sensitivity we adjust the Bragg selectivity of the volume holographic optical element encoded by random phase. Therefore, the rotational sensitivity can be tuned over a large range from several degrees to ten thousandth degrees by changing the radius of rotation. The theoretical calculation, as well as experiment, is demonstrated.
ABSTRACT
A highly precise rotational filter based on a volume-holographic optical element is proposed and demonstrated. We present a clear theoretical calculation of the rotation sensitivity of the volume-holographic filter used to sense the rotation of a spherical ground glass object. By introducing the longitudinal displacement of the scattering point across the sphere, the sensitivity of the filter is greatly improved to 350 times that of a general case for a planar ground glass.
Subject(s)
Algorithms , Filtration/methods , Holography/methods , Image Enhancement/methods , Image Interpretation, Computer-Assisted/methods , Imaging, Three-Dimensional/methods , Computer Simulation , Models, Theoretical , RotationABSTRACT
A paraxial solution to the coaxial holographic storage algorithm is proposed based on the scalar diffraction theory and a VOHIL model (volume hologram being an integrator of the lights emitted from elementary light sources), which can give insight into the optical characteristics of the collinear holographic storage system in an effective way, including the point spread function and shift selectivity. The paraxial solution shows that the reference pattern is the key issue in the point spread function. Thus, the bit error rate of the system can be improved by changing the reference pattern. The proposed solution will be useful in the design of a new reference pattern to perform a high-quality readout pattern in the coaxial holographic storage system.
Subject(s)
Holography/instrumentation , Information Storage and Retrieval , Refractometry/instrumentation , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
A novel design for a volume holographic optical disc to reduce radial cross talk is proposed. By adopting a proper spatial filter, the radial cross talk can be reduced and the radial selectivity increases so that the multiplexing capacity can increase effectively. The theory and the corresponding experiment are demonstrated.
ABSTRACT
A novel volume holographic optical element serving as an atypical mirror with a lateral magnification of 1 in both the horizontal and the vertical directions is proposed. Optical imaging is performed by point-to-point imaging with local cross talk, which prevents ghost diffraction spots from the holographic element of multiple gratings.
ABSTRACT
We propose a novel imaging structure based on a volume holographic optical element that allows one-dimensional optical imaging through a specific Bragg window. The lateral magnification is shown to be linear and negative. Lateral magnifications of 2.5, 5, and 10 of the imaging element are demonstrated theoretically and experimentally.