Surface charge dynamics on air-exposed ferroelectric Pb(Zr,Ti)O3(001) thin films.

Probing of the free surface ferroelectric properties of thin polar films can be achieved either by estimating the band bending variance under the top-most layer or by studying the extent of the extrinsic charge accumulated outside the surface. Photoemitted or incoming low-energy electrons can be used to characterize locally both properties in a spectromicroscopic approach. Thin ferroelectric lead zirco-titanate (PZT) is investigated by combining low energy/mirror electron microscopy (LEEM/MEM) with photoemission electron microscopy (PEEM) and high-resolution photoelectron spectroscopy (XPS). Significant extrinsic negative compensation charge is proven to accumulate on the surface of the outward polarized thin film, indicated by high MEM-LEEM transition values, up to 15.3 eV, and is correlated with the surface electrostatic potential, which can be partially screened either by electrons interacting with the sample or by soft X-rays through the ejection of secondary electrons and generation of positive charge under the surface. A radiation-induced surface charge compensation effect is observed. The study indicates that air-exposed high quality ferroelectric thin films show large negative surface potentials, determined locally on the surface, which are nevertheless sensitive to beam damage and molecular desorption. These values represent a confirmation of previously estimated surface potential energy values determined from the LEED data on clean surfaces.

Self-consistently derived sample permittivity in stabilization of ferroelectricity due to charge accumulated at interfaces.

Recently, a simple model was proposed for the microscopic energy associated to the ferroelectric phase, to be used in a statistical approach in order to derive the equations of state for a ferroelectric thin film [C. M. Teodorescu, Phys. Chem. Chem. Phys., 2021, 23, 4085-4093]. The stabilization energy for an elemental dipole in a polar thin film is the result of the interaction of this dipole with the field generated by charges accumulated at surfaces or interfaces of the thin film. An essential parameter of this interaction is the permittivity of the film, assumed to be a material constant, together with the maximum value of an elemental dipole and the density of the elemental dipoles. These can be connected to three experimental parameters which are the saturation polarization Ps, the coercive field at zero temperature E(0)c and the Curie temperature TC. However, for a ferroelectric material both the global and the differential permittivity depend on the temperature and on the polarization. This raises the question whether such a non-constant permittivity should be used in the stabilization energy of the ferroelectric phase, and whether it can be identified self-consistently with the function resulting after applying the statistics based on the microscopic model. In such case, a mutual interdependence should exist between Ps, E(0)c and TC. A model is built up, able to predict coercitivity, however E(0)c and TC yield values several orders of magnitude higher than the experimental ones. Therefore, one has to introduce a background dielectric constant of several hundreds to accommodate the result of the model with the experimental data. The poling history of the film has to be taken into account, together with the presence of a small bias field. The model is able to predict self-consistently the equation of state of a ferroelectric, and in particular the linear decrease of the coercive field with temperature. The microscopic parameters, in particular the background dielectric constant and the density of elemental dipoles may be expressed directly from experimental quantities.

Ferroelectricity in thin films driven by charges accumulated at interfaces.

A simple view of ferroelectricity is proposed for a thin film with uniform polarization oriented perpendicular to its surface, starting from the assumption that this situation is always accompanied by charge accumulation in the outer metal electrodes, in the contamination layers or near the surface, in the ferroelectric film itself. Starting with the formula derived for an "elemental" dipole moment in the film, simple statistical mechanics allows one to derive hysteresis cycles, and their dependence on temperature starting with only two parameters: the dielectric constant of the material and the maximum value of the dipole moment of a unit cell. Values obtained for Curie temperatures and coercive fields agree well with experiments. "Exact" energy dependencies on the asymmetry parameter are derived, and their connection with the Landau-Ginsburg-Devonshire is proven. By considering also the dipolar interaction in a continuous model, in addition to the ordering energy in the presence of surface charge accumulation, one may estimate the distribution of the polarization inside the film and the validity of the hypothesis of uniform polarization.

Polarization landscape effects in soft X-ray-induced surface chemical decomposition of lead zirco-titanate, evidenced by photoelectron spectromicroscopy.

The stability of thin films of lead zirco-titanate (PZT) under intense soft X-ray beams is investigated by time-resolved photoelectron spectromicroscopy with a lateral resolution below 1 micrometer. Surface dissociation is observed when samples are irradiated with intense (5 × 1023 photons per s per m2) soft X-rays, with promotion of reduced lead on the surface. On areas exhibiting outwards polarization (P(+)), the reduced lead is formed at the expense of P(+)-PZT. On areas presenting co-existing P(+) states with areas without out-of-plane polarization (P(0)), the reduced lead is formed at the expense of the P(0)-PZT component, while the P(+)-PZT remains constant. The main dissociation mechanism was found to be triggered by 'hot' electrons in the conduction band, with energies exceeding the surface dissociation energies. Dissociation occurs basically when the electron affinity is larger than the dissociation energy of PbO (for P(+) areas) or PbO- (for P(0) areas). Such mechanisms may be adapted for dissociation of other molecules on surfaces of ferroelectric thin films or for quantifying the stability of ferroelectric surfaces interacting with other radiation, with applications in the fields of photocatalysis or photovoltaic devices.

The combined action of methanolysis and heterogeneous photocatalysis in the decomposition of chemical warfare agents.

We report the applicability of a hybrid system comprising a La3+-based catalyst and an Au/TiO2 photocatalyst in the decomposition of chemical weapons. This system is able to perform complete degradation of soman, sarin and VX in less than 1 minute under low basic conditions and visible light irradiation.

Room Temperature Ferromagnetic, Anisotropic, Germanium Rich FeGe(001) Alloys.

Ferromagnetic FexGe1-x with x = 2%-9% are obtained by Fe deposition onto Ge(001) at high temperatures (500 °C). Low energy electron diffraction (LEED) investigation evidenced the preservation of the (1 × 1) surface structure of Ge(001) with Fe deposition. X-ray photoelectron spectroscopy (XPS) at Ge 3d and Fe 2p core levels evidenced strong Fe diffusion into the Ge substrate and formation of Ge-rich compounds, from FeGe3 to approximately FeGe2, depending on the amount of Fe deposited. Room temperature magneto-optical Kerr effect (MOKE) evidenced ferromagnetic ordering at room temperature, with about 0.1 Bohr magnetons per Fe atom, and also a clear uniaxial magnetic anisotropy with the in-plane easy magnetization axis. This compound is a good candidate for promising applications in the field of semiconductor spintronics.

Surface versus volume effects in luminescent ceria nanocrystals synthesized by an oil-in-water microemulsion method.

Pure and europium (Eu(3+)) doped cerium dioxide (CeO(2)) nanocrystals have been synthesized by a novel oil-in-water microemulsion reaction method under soft conditions. In-situ X-ray diffraction and RAMAN spectroscopy, high-resolution transmission electron microscopy, UV/Vis diffuse-reflectance and Fourier transform infrared spectroscopy as well as time-resolved photoluminescence spectroscopy were used to characterize the nanaocrystals. The as-synthesized powders are nanocrystalline and have a narrow size distribution centered on 3 nm and high surface area of ~250 m(2) g(-1). Only a small fraction of the europium ions substitutes for the bulk, cubic Ce(4+) sites in the europium-doped ceria nanocrystals. Upon calcination up to 1000 °C, a remarkable high surface area of ~120 m(2) g(-1) is preserved whereas an enrichment of the surface Ce(4+) relative to Ce(3+) ions and relative strong europium emission with a lifetime of ~1.8 ms and FWHM as narrow as 10 cm(-1) are measured. Under excitation into the UV and visible spectral range, the europium doped ceria nanocrystals display a variable emission spanning the orange-red wavelengths. The tunable emission is explained by the heterogeneous distribution of the europium dopants within the ceria nanocrystals coupled with the progressive diffusion of the europium ions from the surface to the inner ceria sites and the selective participation of the ceria host to the emission sensitization. Effects of the bulk-doping and impregnation with europium on the ceria host structure and optical properties are also discussed.

Chemical imaging of catalyst deactivation during the conversion of renewables at the single particle level: etherification of biomass-based polyols with alkenes over H-Beta zeolites.

The etherification of biomass-based alcohols with various linear alpha-olefins under solvent-free conditions was followed in a space- and time-resolved manner on 9 microm large H-Beta zeolite crystals by confocal fluorescence microscopy. This allowed us to visualize the interaction with the substrate and distribution of the coke products into the catalyst at the level of an individual zeolite crystal during the etherification process. The spectroscopic information obtained on the micrometer-scale zeolite was in line with the results obtained with bulk characterization techniques and further confirmed by the catalytic results obtained both for micrometer-scale and nanoscale zeolites. This allowed us to explain the influence of the substrate type (glycerol, glycols, and alkenes) and zeolite properties (Si/Al ratio and particle size) on the etherification activity. The etherification of the biomass-based alcohols takes place mainly on the external surface of the zeolite particles. The gradual blockage of the external surface of the zeolite results in a partial or total loss of etherification activity. The deactivation could be attributed to olefin oligomerization. The high conversions obtained in the etherification of 1,2-propylene glycol with long linear alkenes (up to 80%) and the pronounced deactivation of the zeolite observed in the etherification of glycerol with long linear alkenes (max. 20% conversion) were explained by the spectroscopic measurements and is due to differences in the adsorption, i.e., in the center of the zeolite particle for glycerol and on the external surface in the case of glycols.