Cultivation, characterization, and properties of Chlorella vulgaris microalgae with different lipid contents and effect on fast pyrolysis oil composition.

A systematic study of the effect of nitrogen levels in the cultivation medium of Chlorella vulgaris microalgae grown in photobioreactor (PBR) on biomass productivity, biochemical and elemental composition, fatty acid profile, heating value (HHV), and composition of the algae-derived fast pyrolysis (bio-oil) is presented in this work. A relatively high biomass productivity and cell concentration (1.5 g of dry biomass per liter of cultivation medium and 120 × 106 cells/ml, respectively) were achieved after 30 h of cultivation under N-rich medium. On the other hand, the highest lipid content (ca. 36 wt.% on dry biomass) was obtained under N-depletion cultivation conditions. The medium and low N levels favored also the increased concentration of the saturated and mono-unsaturated C16:0 and C18:1(n-9) fatty acids (FA) in the lipid/oil fraction, thus providing a raw lipid feedstock that can be more efficiently converted to high-quality biodiesel or green diesel (via hydrotreatment). In terms of overall lipid productivity, taking in consideration both the biomass concentration in the medium and the content of lipids on dry biomass, the most effective system was the N-rich one. The thermal (non-catalytic) pyrolysis of Chlorella vulgaris microalgae produced a highly complex bio-oil composition, including fatty acids, phenolics, ethers, ketones, etc., as well as aromatics, alkanes, and nitrogen compounds (pyrroles and amides), originating from the lipid, protein, and carbohydrate fractions of the microalgae. However, the catalytic fast pyrolysis using a highly acidic ZSM-5 zeolite, afforded a bio-oil enriched in mono-aromatics (BTX), reducing at the same time significantly oxygenated compounds such as phenolics, acids, ethers, and ketones. These effects were even more pronounced in the catalytic fast pyrolysis of Chlorella vulgaris residual biomass (after extraction of lipids), thus showing for the first time the potential of transforming this low value by-product towards high added value platform chemicals.

Study of persistent toxic pollutants in a river basin-ecotoxicological risk assessment.

This study presents a complementary approach for the evaluation of water quality in a river basin by employing active and passive sampling. Persistent toxic pollutants representing three classes: organochlorinated pesticides (OCPs), polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs), were studied in grab water samples, in passive samplers/SemiPermeable Membrane Devices (SPMDs) and in fish tissues collected along the Strymonas River, northern Greece at three sampling campaigns during the year 2013. Almost all the target compounds were detected in the study river of Strymonas, northern Greece at the periods of high rainfall intensity and/or low flow-rate. The most frequently detected compounds were 1,2-benzanthracene, benzo(a)pyrene, benzo(b)fluoranthene, endosulfan I, endosulfan II, endosulfan sulfate, endrin aldehyde, fluorene, methoxychlor, polychlorinated biphenyl PCB 28, PCB 180 and pyrene. The family of DDT compounds and aldrin were also occasionally detected. Agricultural run-off and waste effluents are the main sources of hydrophobic organic compounds in the river basin. The use of SPMDs allowed the detection of more micropollutants than active sampling (31 vs. 16, respectively). Results showed relatively low risk however the potential risk associated with micropollutants such as 1,2-benzanthracene, benzo(b)fluoranthene, p,p-dichlorodiphenyldichloroethane (DDD), endosulfan II, methoxychlor, PCB 180 and pyrene should not be neglected. Performing risk assessment based on passive sampling, more information was obtained about temporal and spatial variation. SPMDs could be applied as a pre-evaluation before chemical monitoring in biota.

Active and passive sampling for the assessment of hydrophilic organic contaminants in a river basin-ecotoxicological risk assessment.

This study presents a complementary approach for the evaluation of water quality in a river basin by employing active and passive sampling. Thirty-eight hydrophilic organic compounds (HpOCs) (organohalogen herbicides, organophosphorous pesticides, carbamate, triazine, urea, pharmaceuticals, phenols, and industrial chemicals) were studied in grab water samples and in passive samplers POCIS collected along Strymonas River, Northern Greece, at three sampling campaigns during the year 2013. Almost all the target compounds were detected at the periods of high rainfall intensity and/or low flow rate. The most frequently detected compounds were aminocarb, carbaryl, chlorfenviphos, chloropropham, 2,4-D, diflubenzuron, diuron, isoproturon, metolachlor, and salicylic acid. Bisphenol A and nonylphenol were also occasionally detected. The use of POCIS allowed the detection of more micropollutants than active sampling. Low discrepancy between the concentrations obtained from both samplings was observed, at least for compounds with >50 % detection frequency; thus, POCIS could be a valuable tool for the selection and monitoring of the most relevant HpOCs in the river basin. Results showed relatively low risk from the presence of HpOCs; however, the potential risk associated with micropollutants such as carbaryl, dinoseb, diuron, fenthion, isoproturon, metolachlor, nonylphenol, and salicylic acid should not be neglected.

A multi-residue method for determination of 70 organic micropollutants in surface waters by solid-phase extraction followed by gas chromatography coupled to tandem mass spectrometry.

A multi-residue method, based on gas chromatography coupled to tandem mass spectrometry (GC-MS/MS), has been developed for the determination of 70 organic micropollutants from various chemical classes (organochlorinated, organophosphorous, triazines, carbamate and urea, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, pharmaceuticals, phenols, etc.) in surface waters. A single-step SPE extraction using OASIS HLB cartridges was employed for the recovery of target micropollutants. The method has been validated according to monitoring performance criteria of the Water Framework Directive, taking into account the approved guidelines on quality assurance and quality control. The recoveries ranged from 60 to 110 %, the coefficient of variation from 0.84 to 27.4 %, and the uncertainty from 6 to 37 %. The LOD varied from 6.0 to 40 ng/L. The limits of quantification for the priority pollutants anthracene, alachlor, atrazine, benzo(a)pyrene, chlorfenvinphos, diuron, isoproturon, nonylphenol, simazine, and terbutryn fulfill the criterion of <30 % of the relevant environmental standards. The method was employed to investigate the water quality in the basin of a transboundary river, Strymonas, in NE Greece during three sampling campaigns conducted in the year 2013. Thirty-nine compounds were detected in the river water. Metolachlor, diuron, isoproturon, salicylic acid, chlorfenvinphos, 1,2-benzanthracene, pyrene, diflubenzuron, and carbaryl exhibited the highest detection frequencies.