Nanometals incorporation into active and biodegradable chitosan films.

This study investigates the effects of incorporating ZnO, TiO2, and colloidal Ag nanoparticles on the antioxidant, antimicrobial, and physical properties of biodegradable chitosan films. The research focuses on addressing the growing demand for sustainable packaging solutions that offer efficient food preservation while mitigating environmental concerns. In this investigation, the physical properties including thickness, water content, solubility, swelling degree, tensile strength, and elasticity of the chitosan films were examined. Additionally, the samples were analyzed for total polyphenol content, antimicrobial activity, and antioxidant capacity. Notably, the incorporation of ZnO nanoparticles led to the lowest water content and highest strength values among the tested films. Conversely, the addition of colloidal Ag nanoparticles resulted in films with the highest antioxidant capacities (DPPH: 32.202 ± 1.631 %). Remarkably, antimicrobial tests revealed enhanced activity with the inclusion of colloidal silver nanoparticles, yet the most potent antimicrobial properties were observed in films containing ZnO (E.coli: 2.0 ± 0.0 mm; MRSA: 2.0 ± 0.5 mm). The findings of this study hold significant implications for the advancement of edible biodegradable films, offering potential for more efficient food packaging solutions that address environmental sustainability concerns. By elucidating the effects of nanoparticle incorporation on film properties, this research contributes to the ongoing discourse surrounding sustainable packaging solutions in the food industry.

Effect of Trehalose/OEO/Tween 80/Tween 20 Addition on Physical Stability of Edible Packaging during Storage in Different Humidity Conditions.

Edible packaging has been a topic of much discussion during recent years, mainly due to its lower environmental impact. This study aimed to investigate the properties of an edible packaging made from a combination of carrageenan, orange essential oil (OEO), and trehalose (Tre) under different humidity conditions. The films were analyzed based on their water content, solubility, and textural properties, such as strength and breaking strain. The results of the study showed that the addition of trehalose reduced the water content and increased the strength of the packaging, regardless of the humidity conditions. The inclusion of orange essential oil also contributed to lower water content, which led to more water-resistant packaging (during standard humidity conditions (45%)-c: 15.31%; Tre3OT80: 4.04%, Tre1OT80: 4.48%). The findings of this study have important implications for the production of stable and environmentally friendly edible packaging. The results demonstrate the potential of trehalose and orange essential oil as additives to enhance the properties of edible packaging, particularly in terms of its resistance to moisture. The best results were found in Tre1OT80 and Tre3OT80 samples. Moreover, the study emphasizes the importance of considering storage conditions in the development of edible packaging, as different humidity levels can significantly affect the packaging's properties and shelf life. The findings have practical applications for the food industry, particularly in the development of sustainable packaging solutions and for further studies where the application of this packaging can be analyzed for different foodstuffs.

Nanoparticles and Plant By-Products for Edible Coatings Production: A Case Study with Zinc, Titanium, and Silver.

For the development of functional edible packaging that will not lead to rejection by the consumer, it is needed to analyze the interactions between ingredients in the packaging matrix. The aim of this study was to develop edible chitosan-based coatings that have been enriched with red grape extracts, zinc, silver, and titanium nanoparticles. The organoleptic properties of the produced edible packaging were described by quantitative descriptive analysis and consumer acceptability was verified by hedonic analysis. By image analysis, color parameters in the CIELab system, opacity, Whiteness and Yellowness Index were described. The microstructure was described by scanning electron microscopy. The hedonic evaluation revealed that the addition of nanometals and their increasing concentration caused a deterioration in sample acceptability. The overall evaluation was higher than 5 in 50% of the samples containing nanometals. The addition of nanometals also caused statistically significant changes in L*, a*, and b* values. The sample transparency generally decreased with the increasing concentration of nanoparticle addition. Scanning electron microscopy showed, that the addition of nanometals does not disrupt the protective function of the packaging. From a sensory point of view, the addition of ZnO nanoparticles in concentrations of 0.05 and 0.2% appeared to be the most favorable of all nanometals.

Acceptability Analysis of 3D-Printed Food in the Area of the Czech Republic Based on Survey.

The aim of the research was to observe consumer perceptions of 3D food printing and to highlight possible applications of this production. The questionnaire survey took place in the Czech Republic and was attended by 1156 respondents. The questionnaire was divided into six sections: (1) Socio-Demographic Data; (2) 3D Common Printing Awareness; (3) 3D Food Printing Awareness; (4) 3D Food Printing, Worries and Understanding; (5) Application; (6) Investments. Although awareness of 3D food printing is increasing, a very small fraction of respondents had encountered printed food in person (1.5%; n = 17). Respondents expressed concerns about the health benefits and the reduced prices of novel foods, and they perceived printed foods as ultra-processed foods (56.0%; n = 647). Concerns have also been raised about job losses due to the introduction of new technology. On the contrary, they perceived that quality raw materials would be used to prepare printed foods (52.4%; n = 606). Most respondents believed that printed foods would be visually appealing and would find application in several food industry sectors. Most respondents believed that 3D food printing is the future of the food sector (83.8%; n = 969). The gained results can be helpful for 3D food printer producers, as well as for future experiments dealing with 3D food printing issues.

Incorporation of Natural Blueberry, Red Grapes and Parsley Extract By-Products into the Production of Chitosan Edible Films.

The aim of the research was to produce edible packaging based on chitosan with the addition of various concentrations of extracts of blueberry, red grape and parsley marcs. Packaging was made from extrudate extracts, which were subsequently analyzed by physicochemical methods: zeta-potential, gas barrier properties, thickness, water content, solubility, swelling degree, textural properties, total polyphenol content (TPC), polyphenols by high pressure liquid chromatography (HPLC), antioxidant activity, attenuated total reflectance Fourier-Transform spectroscopy (FTIR), antimicrobial activity and determination of migration of bioactive substances. The results indicate that a higher content of plant extracts have a statistically significant (p < 0.05) influence on properties of experimentally produced edible films. Edible films produced with the highest concentrations of red grapes marc extracts showed the most advantageous properties since antimicrobial activity against E. coli were the highest in this kind of produced film. The physical properties of edible films were also improved by the addition of extracts; gas permeability toward oxygen can be defined as advantageous, as can swelling degree, which decreased with higher concentrations of extracts. The research emphasized the possibility to use plant foodstuffs by-products in the production of edible/biodegradable films, helping in the overall sustainability and eco-friendliness of food/package production.

Active Edible Films Fortified with Natural Extracts: Case Study with Fresh-Cut Apple Pieces.

The main aim of the study was to prepare the edible films based on carrageenan/chitosan and incorporate them into the following matrices: the natural extracts of Clitoria ternatea, Brassica oleracea, and Ipomea batatas. The films were characterized by TPC (total polyphenols content), antioxidant activity, and textural properties. Experimentally produced films were added in the packaging of freshly cut apple pieces, and the apple pieces were dipped into the films produced from carrageenan and chitosan. The appearance of the samples was monitored, as were antioxidant activity and total polyphenol content. The intelligent properties of films were evaluated too. The polymer type used for the preparation had the highest impact on the prepared films, and CHLCZ (red cabbage extract-Brassica oleracea) featured the best antioxidant activity. The intelligent properties were slightly confirmed in samples with the addition of red cabbage. The main finding was that the coating of fresh-cut apples emphasized the possibility to use a carrageenan matrix with the addition of extracts. The samples immersed in this coating type showed higher antioxidant activity as well as a superior color when compared to that of chitosan coated apple samples.

Plant Byproducts as Part of Edible Coatings: A Case Study with Parsley, Grape and Blueberry Pomace.

Studies dealing with the development of edible/biodegradable packaging have been gaining popularity since these commodities are marked as being ecofriendly, especially when byproducts are incorporated. Consequently, this study aimed at the development of chitosan-based coatings with plant byproducts. Their sensory properties, colour attributes, occurrence of cracks in microstructure and biodegradability were analysed. Coatings containing grape and blueberry pomace had statistically significantly (p < 0.05) higher levels of colour intensity. Coating samples were characterised by lower aroma intensity (3.46-4.77), relatively smooth surface (2.40-5.86), and low stickiness (2.11-3.14). In the overall hedonic evaluation, the samples containing parsley pomace in all concentrations and a sample containing 5% grape pomace achieved a statistically significantly (p < 0.05) better evaluation (5.76-5.93). The lowest values of the parameter ΔE2000 were recorded for the sample containing 5% parsley pomace (3.5); the highest was for the sample with 20% blueberry pomace (39.3). An analysis of the coating surface microstructure showed the presence of surface cracks at an 80 K magnification but the protective function of the edible coating was not disrupted by the added plant pomace. The produced samples can be considered to have a high biodegradability rate. The results of our experimentally produced coatings indicate their possible application on a commercial scale.