Smoothing tool design and performance during subaperture glass polishing.

During subaperture tool grinding and polishing, overlaps of the tool influence function can result in undesirable mid-spatial frequency (MSF) errors in the form of surface ripples, which are often corrected using a smoothing polishing step. In this study, flat multi-layer smoothing polishing tools are designed and tested to simultaneously (1) reduce or remove MSF errors, (2) minimize surface figure degradation, and (3) maximize the material removal rate. A time-dependent convergence model in which spatial material removal varies with a workpiece-tool height mismatch, combined with a finite element mechanical analysis to determine the interface contact pressure distribution, was developed to evaluate various smoothing tool designs as a function of tool material properties, thicknesses, pad textures, and displacements. An improvement in smoothing tool performance is achieved when the gap pressure constant, h¯ (which describes the inverse rate at which the pressure drops with a workpiece-tool height mismatch), is minimized for smaller spatial scale length surface features (namely, MSF errors) and maximized for large spatial scale length features (i.e., surface figure). Five specific smoothing tool designs were experimentally evaluated. A two-layer smoothing tool using a thin, grooved IC1000 polyurethane pad (with a high elastic modulus, E p a d =360M P a), thicker blue foam (with an intermediate modulus, E f o a m =5.3M P a) underlayer, and an optimized displacement (d t=1m m) provided the best overall performance (namely, high MSF error convergence, minimal surface figure degradation, and high material removal rate).

Understanding the tool influence function during sub-aperture belt-on-wheel glass polishing.

The tool influence function (TIF) during sub-aperture belt-on-wheel polishing has been evaluated as a function of various process conditions (belt use/wear, dwell time, displacement, belt velocity, and wheel modulus and diameter) on fused silica glass workpieces using C e O 2 polishing media. TIF spots are circular or elliptical in shape with a largely flat bottom character. The volumetric removal rate varies significantly with belt use (or wear), stabilizing after ∼15m i n of use. A modified Preston model, where the pressure dependence is adjusted using a different scaling of the wheel modulus (E w0.5), largely predicts the volumetric removal rate over the range of process conditions evaluated. The relatively high volumetric removal rate of 30-60m m 3/h using a fixed C e O 2-in-resin-host belt offers a rapid, and hence, more economical, initial polish of aspheric and freeform optics.

Understanding and reducing mid-spatial frequency ripples during hemispherical sub-aperture tool glass polishing.

During sub-aperture tool polishing of glass optics, mid-spatial surface ripples are generated because of material removal non-uniformities during tool linear translation (resulting in feed ripples) and tool pathway step overlaps (resulting in pitch ripples). A variety of tool influence function (TIF) spots, trenches, and patches were created to understand and minimize such ripples on fused silica workpieces after polishing with cerium oxide slurry using a rotating hemispherical pad-foam tool. The feed ripple amplitude can be decreased by reducing the non-uniformities in the pad texture and/or by minimizing a derived feed ripple metric (rf=Vmax0.5Vf/Rt) via adjustments in processing parameters. Pitch ripples can be minimized by reducing relative step distance to spot radius ratio (xs/at) and by achieving a flat bottom trench shape cross section or by reducing the material removal per pass. Using the combined methods, an overall ripple error of ∼1.2nm rms has been achieved.

Effect of workpiece curvature on the tool influence function during hemispherical sub-aperture tool glass polishing.

The influence of workpiece curvature on the tool influence function spot during polishing of fused silica glass with cerium oxide slurry, while using a rotating hemispherical pad-foam tool for a wide variety of process conditions (tool displacement, inclination angle, and rotation rate), has been investigated. (Workpiece curvature ranged from 500 mm radius concave to 43 mm radius convex.) The TIF spot decreases in diameter and increases in the peak removal rate on more convex workpieces. In contrast, the TIF spot increases both in diameter and peak removal rate on more concave workpieces. For the range of workpiece curvatures investigated, both the spot size and the peak removal rate changed significantly, as much as 2 times. An elastic sphere-sphere contact mechanics model, which utilizes both a modified displacement (that leads to a change in the applied load) as well as a mismatch factor (that influences the pressure distribution shape), has been developed. The model was validated using both offline load-displacement measurements and finite-element analysis simulations. The model quantitatively describes the measured change in the relative contact diameter and relative pressure distribution, as well as semiquantitively describes the change in the relative volumetric removal rate on a large variety of TIF spots. The change in the volumetric removal rate for convex workpieces is a result of the balance between a decreasing spot size (reducing removal) and an increasing peak pressure (increasing removal), which usually results in relatively small changes in volumetric removal. In the case of concave workpieces, the volumetric removal rate change is also governed by a similar balance, but the spot size increase contribution dominates, resulting in a significant increase in volumetric removal rate. Understanding these trends can enable methods to add greater determinism during the fabrication of freeform optics by adjusting polishing parameters (such as dwell time) while the tool translates along a workpiece surface with different local curvatures.

Mechanisms influencing and prediction of tool influence function spots during hemispherical sub-aperture tool polishing on fused silica.

Sub-aperture tool polishing of precision optics requires a detailed understanding of the local material removal [tool influence function (TIF)] at the contact spot between the workpiece and tool to achieve high removal determinism and hence precision of the optic relative to the desired/design surface figure. In this study, the mechanisms influencing and the quantitative prediction of the removal rate and shape of TIF spots during polishing of fused silica glass with cerium oxide slurry using a rotating hemispherical pad-foam tool for a wide variety of process conditions (including tool properties, kinematics, and applied displacements) are investigated. The TIF volumetric removal rate can be estimated utilizing the average relative velocity and contact area using a simple analytical model. In addition, stability of the volumetric removal rate for fixed process conditions is shown to be greatly dependent on the pad preparation and amount of tool use (affecting both pad topography and slurry buildup), whose general behavior shows an increase in removal rate followed by stabilization with polishing time. The determination of the TIF removal shape is more complex. An extended version of the Preston removal model is developed to explain a comprehensive set of measured TIF removal shapes to within ∼22%. This model incorporates a number of phenomena impacting the TIF removal shape including: (a) temporal and spatial dependent relative velocity between the workpiece and tool; (b) an elastic mechanics based, as well as hydrodynamic, pressure distribution; (c) a spatially dependent friction coefficient possibly caused by both reduced slurry replenishment in low velocity regions and pad slurry islands (100 µm scale) and porosity (millimeter scale); and (d) a shear-based removal mechanism on the periphery of the contact spot.

Prediction of a positive circumferential resection margin at surgery following neoadjuvant chemotherapy for adenocarcinoma of the oesophagus.

Background: A positive circumferential resection margin (CRM) has been associated with higher rates of locoregional recurrence and worse survival in oesophageal cancer. The aim of this study was to establish if clinicopathological and radiological variables might predict CRM positivity in patients who received neoadjuvant chemotherapy before surgery for oesophageal adenocarcinoma. Methods: Multivariable analysis of clinicopathological and CT imaging characteristics considered potentially predictive of CRM was performed at initial staging and following neoadjuvant chemotherapy. Prediction models were constructed. The area under the curve (AUC) with 95% confidence intervals (c.i.) from 1000 bootstrapping was assessed. Results: A total of 223 patients were included in the study. Poor differentiation (odds ratio (OR) 2·84, 95 per cent c.i. 1·39 to 6·01) and advanced clinical tumour status (T3-4) (OR 2·93, 1·03 to 9·48) were independently associated with an increased CRM risk at diagnosis. CT-assessed lack of response (stable or progressive disease) following chemotherapy independently corresponded with an increased risk of CRM positivity (OR 3·38, 1·43 to 8·50). Additional CT evidence of local invasion and higher CT tumour volume (14 cm3) improved the performance of a prediction model, including all the above parameters, with an AUC (c-index) of 0·76 (0·67 to 0·83). Variables associated with significantly higher rates of locoregional recurrence were pN status (P = 0·020), lymphovascular invasion (P = 0·007) and poor response to chemotherapy (Mandard score 4-5) (P = 0·006). CRM positivity was associated with a higher locoregional recurrence rate, but this was not statistically significant (P = 0·092). Conclusion: The presence of advanced cT status, poor tumour differentiation, and CT-assessed lack of response to chemotherapy, higher tumour volume and local invasion can be used to identify patients at risk of a positive CRM following neoadjuvant chemotherapy.

Antecedentes: Un margen de resección circunferencial (circumferential resection margin, CRM) positivo se ha asociado con tasas más elevadas de recidiva locorregional y peor supervivencia en el cáncer de esófago. El objetivo de este estudio fue establecer si las variables clínico­patológicas y radiológicas podrían predecir la positividad del CRM en el adenocarcinoma de esófago tras quimioterapia neoadyuvante antes de la cirugía. Métodos: Se realizó un análisis multivariable de las características clínico­patológicas y de la tomografía computarizada (computed tomography, CT) que se consideraron potencialmente predictivas de CRM en la estadificación inicial y tras la quimioterapia neoadyuvante. Se construyeron modelos de predicción. Se evaluó el área bajo la curva (area under curve, AUC) con el i.c. del 95% a partir de 1.000 muestras bootstrap. Resultados: Se incluyeron 223 pacientes en el estudio. Una pobre diferenciación (razón de oportunidades, odds ratio, OR 2,84, i.c. del 95% 1,39­6,01) y un estadio clínico T avanzado (T3­4) (OR 2,93, i.c. del 95% 1,03­9,48) se asociaron de forma independiente con un riesgo aumentado de CRM en el diagnóstico. La falta de respuesta en la CT (estable o enfermedad en progresión) tras la quimioterapia se correspondía de forma independiente con un riesgo aumentado de CRM positivo (OR 3,38, i.c. del 95% 1,43­8,50). Además, la evidencia por CT de invasión local y un mayor volumen del tumor en CT (14 cm3) mejoraron el funcionamiento del modelo predictivo, incluyendo todos los parámetros previamente señalados; con AUC (índice c) de 0,76 (0,68­0,83). Las variables asociadas de forma significativa con tasas más elevadas de recidiva locorregional fueron el estado de los ganglios linfáticos patológicos (P = 0,002), la invasión linfovascular (P = 0,007) y la respuesta pobre a la quimioterapia (Mandard 4 y 5 (P = 0,006)). La positividad del CRM se asoció con una tasa de recidiva locorregional más elevada pero sin alcanzar significación estadística (P = 0,09). Conclusión: La presencia de un estadio clínico T avanzado, tumor pobremente diferenciado, falta de respuesta a la quimioterapia en la TC, mayor volumen del tumor en la TC e invasión local pueden ser utilizados para identificar pacientes en riesgo de un CRM positivo tras quimioterapia neoadyuvante.

The freshwater Amazonian stingray, Potamotrygon motoro, up-regulates glutamine synthetase activity and protein abundance, and accumulates glutamine when exposed to brackish (15 per thousand) water.

This study aimed to examine whether the stenohaline freshwater stingray, Potamotrygon motoro, which lacks a functional ornithine-urea cycle, would up-regulate glutamine synthetase (GS) activity and protein abundance, and accumulate glutamine during a progressive transfer from freshwater to brackish (15 per thousand) water with daily feeding. Our results revealed that, similar to other freshwater teleosts, P. motoro performed hyperosmotic regulation, with very low urea concentrations in plasma and tissues, in freshwater. In 15 per thousand water, it was non-ureotelic and non-ureoosmotic, acting mainly as an osmoconformer with its plasma osmolality, [Na+] and [Cl-] comparable to those of the external medium. There were significant increases in the content of several free amino acids (FAAs), including glutamate, glutamine and glycine, in muscle and liver, but not in plasma, indicating that FAAs could contribute in part to cell volume regulation. Furthermore, exposure of P. motoro to 15 per thousand water led to up-regulation of GS activity and protein abundance in both liver and muscle. Thus, our results indicate for the first time that, despite the inability to synthesize urea and the lack of functional carbamoyl phosphate synthetase III (CPS III) which uses glutamine as a substrate, P. motoro retained the capacity to up-regulate the activity and protein expression of GS in response to salinity stress. Potamotrygon motoro was not nitrogen (N) limited when exposed to 15 per thousand water with feeding, and there were no significant changes in the amination and deamination activities of hepatic glutamate dehydrogenase. In contrast, P. motoro became N limited when exposed to 10 per thousand water with fasting and could not survive well in 15 per thousand water without food.

Assessing the environmental impact of ashes used in a landfill cover construction.

Large amounts of construction materials will be needed in Europe in anticipation for capping landfills that will be closed due to the tightening up of landfill legislation. This study was conducted to assess the potential environmental impacts of using refuse derived fuel (RDF) and municipal solid waste incineration (MSWI) ashes as substitutes for natural materials in landfill cover designs. The leaching of substances from a full-scale landfill cover test area built with different fly and bottom ashes was evaluated based on laboratory tests and field monitoring. The water that drained off above the liner (drainage) and the water that percolated through the liner into the landfill (leachate) were contaminated with Cl(-), nitrogen and several trace elements (e.g., As, Cu, Mo, Ni and Se). The drainage from layers containing ash will probably require pre-treatment before discharge. The leachate quality from the ash cover is expected to have a minor influence on overall landfill leachate quality because the amounts generated from the ash covers were low, <3-30l (m(2)yr)(-1). Geochemical modelling indicated that precipitation of clay minerals and other secondary compounds in the ash liner was possible within 3 years after construction, which could contribute to the retention of trace elements in the liner in the long term. Hence, from an environmental view point, the placement of ashes in layers above the liner is more critical than within the liner.

Chiral lumazines: preparation, properties, enantiomeric separation.

Optically active lumazines (biolumazine, dictyolumazine, monalumazine, and neolumazine) are prepared from the corresponding pterins by enzymatic reaction, using pterin deaminase excreted by Dictyostelium discoideum. The fluorescence properties, circular dichroism spectra, and chromatographic behavior of these lumazines are studied. D- and L-enantiomers of biolumazine, dictyolumazine, and monalumazine are separated using a chiral flavoprotein column. This column also separates the enantiomeric pterins of the threo form: monapterin and dictyopterin. However, the column does not separate the enantiomeric pterins of the erythro form: neopterin and biopterin. By coupling a reverse-phase column to the flavoprotein column, the separation of pterins and lumazines in function of their hydrophobicity, as well as the separation of the diastereomers, is achieved. This coupled achiral/chiral high-performance liquid chromatography method enables determination of the stereoconfiguration of natural lumazines by comparison with optically pure compounds. A lumazine derivative, present in the extracellular medium of Dictyostelium discoideum, is identified as D-dictyolumazine, i.e., 6-(D-threo-1,2-dihydroxypropyl)-lumazine.

The major pterin in Tetrahymena pyriformis is 6-(D-threo-1,2,3-trihydroxypropyl)-pterin (D-monapterin) and not 6-(L-threo-1,2-dihydroxypropyl)-pterin (ciliapterin).

The major pterin in Tetrahymena pyriformis, strain W, earlier suggested to be L-threo-biopterin and named ciliapterin [1] is now identified as D-threo-neopterin (D-monapterin). This is the first example of a natural D-monapterin. This compound was characterized by its chromatographic behavior, its fluorescence properties and by its oxidation product with alkaline permanganate. The final identification was obtained by comparison with an authentic material using an exchange ligand chromatography method with D-phenylalanine as chiral modifier and Cu (II) as metal ion. D-monapterin is also present as the major pterin in Tetrahymena pyriformis strains GL and ST, and in Tetrahymena thermophila.

Renal artery aneurysms. Natural history and prognosis.

Eighty-three patients out of 8,525 undergoing renal angiography during the years 1970-1979 were found to have renal artery aneurysm, which in six patients were bilateral and in 11 multiple. This corresponds to an incidence of almost 1% in this group of patients. Sixty-nine patients were treated conservatively and followed for a mean of 4.3 years. At that time nine patients had died. The cause of death was in no case related to the aneurysm. None of the 60 living patients had symptoms which could be related to the aneurysm. Reports of 36,656 autopsies, including most of the sudden deaths occurring in southern Sweden during a ten-year period, were analyzed. Nineteen cases of ruptured arterial aneurysms in the branches of abdominal aorta were found, but in no case were the renal arteries involved. It is concluded that the risk for rupture of a renal artery aneurysm is extremely small. The indications to operate renal artery aneurysms are discussed.