Bacterial surface attachment and fouling assay on polymer and carbon surfaces using Rheinheimera sp. identified using bacteria community analysis of brackish water.

Biofouling on surfaces in contact with sea- or brackish water can severely impact the function of devices like reverse osmosis modules. Single species laboratory assays are frequently used to test new low fouling materials. The choice of bacterial strain is guided by the natural population present in the application of interest and decides on the predictive power of the results. In this work, the analysis of the bacterial community present in brackish water from Mashabei Sadeh, Israel was performed and Rheinheimera sp. was detected as a prominent microorganism. A Rheinheimera strain was selected to establish a short-term accumulation assay to probe initial bacterial attachment as well as biofilm growth to determine the biofilm-inhibiting properties of coatings. Both assays were applied to model coatings, and technically relevant polymers including laser-induced graphene. This strategy might be applied to other water sources to better predict the fouling propensity of new coatings.

Low-Voltage Bacterial and Viral Killing Using Laser-Induced Graphene-Coated Non-woven Air Filters.

Laser-induced graphene (LIG) is uniquely positioned to advance applications in which electrically conductive carbon coatings are required. Recently, the antifouling, antiviral, and antibacterial properties of LIG have been proven in both air and water filtration applications. For example, an unsupported LIG based filter (pore size: ∼0.3 µm) demonstrated exceptional air filtration properties, while its joule heating effects successfully sterilized and removed unwanted biological components in air despite persisting challenges such as pressure drop, energy consumption, and lack of mechanical robustness. Here, we developed a polyimide (PI) non-woven supported LIG air filter with negligible pressure drop changes compared to the non-woven support material and showed that low electrical current density inactivates aerosolized bacteria. A current density of 4.5 mA/cm2 did not cause significant joule heating, and 97.2% bacterial removal was obtained. The low-voltage antibacterial mechanism was elucidated using bacterial inhibition experiments on a titanium surface and on an LIG surface fabricated on dense PI films. Complete sterilization was obtained using current densities of ∼8 mA/cm2 applied for 2 min or ∼ 6 mA/cm2 for 10 min upon the dense PI-LIG surface. Lastly, >98% bacterial removal was observed using a low-resistance LIG-coated non-woven polyimide air filter at 5 V. However, only very low voltages (∼0.3 V) were needed to remove ∼99% Pseudomonas aeruginosa bacteria and 100% of T4 virus when the LIG-coated filters were hybridized with a stainless steel mesh. Our results show that low current density levels at very low voltages are sufficient for substantial bacterial and viral inactivation, and that these principles might be effectively used in a wide number of air filtration applications such as air conditioners or other ventilation systems, which might limit the spread of infectious particles in hospitals, homes, workplaces, and the transportation industry.

Electrochemical Removal of Organic and Inorganic Pollutants Using Robust Laser-Induced Graphene Membranes.

The removal of emerging environmental pollutants in water and wastewater is essential for high drinking water quality or for discharge to the environment. Electrochemical treatment is a promising technology shown to degrade undesirable organic compounds or metals via oxidation and reduction, and carbon-based electrodes have been reported. Here, we fabricated a robust, porous laser-induced graphene (LIG) electrode on a commercial water treatment membrane using the multilasing technique and demonstrated the electrochemical removal of iohexol, an iodine contrast compound, and chromium(VI), a highly toxic heavy metal ion. Multiple lasing resulted in a more ordered graphitic lattice, a more physically robust carbon layer, and a 3-4-fold higher electrical conductivity. These properties ultimately led to a more efficient electrochemical process, and the optimized LIG electrodes showed a higher hydrogen peroxide (H2O2) generation. At 3 V, 90% of Cr(VI) was removed after 6 h and reached >95% removal after 8 h at pH 2. Cr(VI) was mainly reduced to Cr(III), with small amounts of Cr(I) and Cr(0), which were partially deposited on the electrode membrane surface, confirmed with X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy analysis. Under the same conditions, 50% of iohexol was degraded after 6 h and the transformation products (TPs) were identified using ultra-performance liquid chromatography coupled with mass spectroscopy. A total of seven main intermediates were identified including deiodinated TPs (m/z = 695, 570, and 443), probably occurring via three transformation pathways including oxidative deiodination, amide hydrolysis, and deacetylation. The electrical energy costs calculated for the removal of 2 mg L-1 Cr(VI) was ∼$0.08/m3 in this system. Taken together, the porous LIG electrodes might be utilized for electrochemical removal of emerging contaminants in multiple applications because they can be rapidly formed on flexible polymer substrates at low cost.

Superhydrophobic Candle Soot as a Low Fouling Stable Coating on Water Treatment Membrane Feed Spacers.

Membrane separation processes including reverse osmosis are now considered essential techniques for water and wastewater treatment, especially in water-scarce areas where desalination and water reuse can augment the water supply. However, biofouling remains a significant challenge for these processes and in general for marine biological fouling, which results in increased energy consumption and high operational costs. Especially in flat sheet membrane modules, intense biofilm growth occurs on the feed spacer at points of contact to the membrane surface. Here, we developed an ultrastable superhydrophobic antibiofouling feed spacer that resists biofilm growth. A commercial polypropylene feed spacer was coated with poly(dimethylsiloxane) (PDMS), and then, candle soot nanoparticles (CSNPs) were embedded into the ultrathin layer of PDMS, which resulted in a superhydrophobic nanostructured surface with a contact angle >150°. The CSNP-coated spacer was examined for inhibition of biofilm growth by a cross-flow membrane channel using Pseudomonas aeruginosa (PA01), and the coating was examined for effectiveness in marine fouling by testing the adhesion of marine bacterium Cobetia marina and diatom Navicula perminuta in a dynamic accumulation assay. In all cases, the CSNP coatings showed almost complete elimination of biofilm growth under the conditions tested. Confocal laser scanning microscopy and scanning electron microscopy indicated a 99% reduction in biofilm growth on the modified spacers compared to the uncoated controls. This effect was attributed to the superhydrophobic nanostructured surface, where trapped gasses formed a plastron on the coating. This plastron was observed to be extremely stable over time and could even be replenished at elevated temperatures. Development of similar antibiofouling coatings on feed spacers or other marine applications might lead to improvements in many industrial processes including membrane filtration where increased membrane life span and reduced energy consumption are key to implementation.

Silver-doped laser-induced graphene for potent surface antibacterial activity and anti-biofilm action.

Previously, laser-induced graphene (LIG) coated surfaces were shown to resist biofilm growth, although the material was not strongly antibacterial. Here, we show LIG surfaces doped with silver nanoparticles (Ag0 or AgNPs) as highly antibacterial surfaces. Starting from AgNO3 polyethersulfone (PES) polymer substrates, silver nanoparticles between 5-10 nm were generated in situ during the lasing process and stably embedded in the fibrous and porous structure of LIG in a single step. These silver doped LIG (Ag@LIG) surfaces were highly toxic to bacteria via a mechanism of both Ag+ ion release and possible surface toxicity of the AgNPs. The added antibacterial function of Ag-nanoparticles expands the functionality of LIG coated surfaces and might lead to highly effective point of use/entry devices in rural areas or in disaster situations with contaminated water sources.

Low voltage electric potential as a driving force to hinder biofouling in self-supporting carbon nanotube membranes.

This study aimed at evaluating the contribution of low voltage electric field, both alternating (AC) and direct (DC) currents, on the prevention of bacterial attachment and cell inactivation to highly electrically conductive self-supporting carbon nanotubes (CNT) membranes at conditions which encourage biofilm formation. A mutant strain of Pseudomonas putida S12 was used a model bacterium and either capacitive or resistive electrical circuits and two flow regimes, flow-through and cross-flow filtration, were studied. Major emphasis was placed on AC due to its ability of repulsing and inactivating bacteria. AC voltage at 1.5 V, 1 kHz frequency and wave pulse above offset (+0.45) with 100Ω external resistance on the ground side prevented almost completely attachment of bacteria (>98.5%) with concomitant high inactivation (95.3 ± 2.5%) in flow-through regime. AC resulted more effective than DC, both in terms of biofouling reduction compared to cathodic DC and in terms of cell inactivation compared to anodic DC. Although similar trends were observed, a net reduced extent of prevention of bacterial attachment and inactivation was observed in filtration as compared to flow-through regime, which is mainly attributed to the permeate drag force, also supported by theoretical calculations in DC in capacitive mode. Electrochemical impedance spectroscopy analysis suggests a pure resistor behavior in resistance mode compared to involvement of redox reactions in capacitance mode, as source for bacteria detachment and inactivation. Although further optimization is required, electrically polarized CNT membranes offer a viable antibiofouling strategy to hinder biofouling and simplify membrane care during filtration.