ABSTRACT
The electrochemical behavior and sensing performance of an electrode modified with NiFe2O4 (NFO), MoS2, and MoS2-NFO were thoroughly investigated using CV, EIS, DPV, and CA measurements, respectively. MoS2-NFO/SPE provided a higher sensing performance towards the detection of clenbuterol (CLB) than other proposed electrodes. After optimization of pH and accumulation time, the current response recorded at MoS2-NFO/SPE linearly increased with an increase of CLB concentration in the range from 1 to 50 µM, corresponding to a LOD of 0.471 µM. In the presence of an external magnetic field, there were positive impacts not only on mass transfer, ionic/charge diffusion, and absorption capacity but also on the electrocatalytic ability for redox reactions of CLB. As a result, the linear range was widened to 0.5-50 µM and the LOD value was about 0.161 µM. Furthermore, stability, repeatability, and selectivity were assessed, emphasizing their high practical applicability.
ABSTRACT
In this work, reduced graphene oxide/double-walled carbon nanotubes/octahedral-Fe3O4/chitosan composite material modified screen-printed gold electrodes (rGO/DWCNTs/Oct-Fe3O4/Cs/SPAuE) under inhibition of urease enzyme was developed for the determination of glyphosate (GLY). The electrochemical behaviors of GLY on these electrodes were evaluated by square wave voltammetry (SWV). With the electroactive surface area is 1.7 times higher than that of bare SPAuE, the rGO/DWCNTs/Oct-Fe3O4/Cs/SPAuE for detection of GLY shows a low detection limit (LOD) of ~ 0.08 ppb in a large concentration range of 0.1-1000 ppb. Moreover, it is also successfully applied to the determination of GLY in river water samples with recoveries and relative standard deviations (RSDs) from 98.7% to 106.9% and from 0.79% to 0.87%, respectively. The developed composite will probably provide an universal electrochemical sensing platform that is very promising for environmental monitoring.
Subject(s)
Chitosan , Graphite , Nanotubes, Carbon , Electrochemical Techniques , Electrodes , Glycine/analogs & derivatives , Limit of Detection , GlyphosateABSTRACT
In this work, we demonstrate the preparation of hybrid thin films based on double-walled carbon nanotubes and graphene for electrochemical sensing applications. The hybrid films were synthesized on polycrystalline copper foil by thermal chemical vapor deposition under low pressure. This carbonaceous hybrid film has exhibited high transparency with a transmittance of 94.3 %. The occurrence of this hybrid material on the electrode surface of screen-printed electrodes was found to increase electroactive surface area by 1.4 times, whereas electrochemical current was enhanced by 2.4 times. Such a highly transparent and conductive hybrid film was utilized as a transducing platform of enzymatic electrochemical arsenic(V) sensor. The as-prepared sensor shows the linear detection of arsenic(V) in the range from 1 to 10 ppb, with a limit of detection as low as 0.287 ppb. These findings provide a promising approach to develop new multifunctional electrochemical sensing systems for environmental monitoring and biomedical diagnostics.
ABSTRACT
A study of the chemical constituents of a methanolic extract of the roots of Livistona halongensis (Arecaceae) led to the isolation of two new flavanes, 2S,3S-3,5,7,3'-tetrahydroxy-5'-methoxyflavane (1) and 3,7,3'-trihydroxy-5'-methoxyflavane 5-O-beta-glucopyranoside (2), together with trans-3,5,3',5'-tetrahydroxy-4-methoxystilbene, saccharose and beta-sitosterol-3-O-beta-glucopyranoside. The structures of these compounds were elucidated on the basis of spectroscopic data.