Recent Advances in Sodium-Ion Batteries: Cathode Materials.

Emerging energy storage systems have received significant attention along with the development of renewable energy, thereby creating a green energy platform for humans. Lithium-ion batteries (LIBs) are commonly used, such as in smartphones, tablets, earphones, and electric vehicles. However, lithium has certain limitations including safety, cost-effectiveness, and environmental issues. Sodium is believed to be an ideal replacement for lithium owing to its infinite abundance, safety, low cost, environmental friendliness, and energy storage behavior similar to that of lithium. Inhered in the achievement in the development of LIBs, sodium-ion batteries (SIBs) have rapidly evolved to be commercialized. Among the cathode, anode, and electrolyte, the cathode remains a significant challenge for achieving a stable, high-rate, and high-capacity device. In this review, recent advances in the development and optimization of cathode materials, including inorganic, organometallic, and organic materials, are discussed for SIBs. In addition, the challenges and strategies for enhancing the stability and performance of SIBs are highlighted.

Advances in Hole Transport Materials for Layered Casting Solar Cells.

Huge energy consumption and running out of fossil fuels has led to the advancement of renewable sources of power, including solar, wind, and tide. Among them, solar cells have been well developed with the significant achievement of silicon solar panels, which are popularly used as windows, rooftops, public lights, etc. In order to advance the application of solar cells, a flexible type is highly required, such as layered casting solar cells (LCSCs). Organic solar cells (OSCs), perovskite solar cells (PSCs), or dye-sensitive solar cells (DSSCs) are promising LCSCs for broadening the application of solar energy to many types of surfaces. LCSCs would be cost-effective, enable large-scale production, are highly efficient, and stable. Each layer of an LCSC is important for building the complete structure of a solar cell. Within the cell structure (active material, charge carrier transport layer, electrodes), hole transport layers (HTLs) play an important role in transporting holes to the anode. Recently, diverse HTLs from inorganic, organic, and organometallic materials have emerged to have a great impact on the stability, lifetime, and performance of OSC, PSC, or DSSC devices. This review summarizes the recent advances in the development of inorganic, organic, and organometallic HTLs for solar cells. Perspectives and challenges for HTL development and improvement are also highlighted.

Silver decorated on cobalt ferrite nanoparticles as a reusable multifunctional catalyst for water treatment applications in non-radiation conditions.

In this investigation, cobalt ferrite nanoparticles (CFO NPs) were synthesized using a hydrothermal method. Then, silver nanoparticles (Ag NPs) were decorated on CFO NPs to form Ag/CFO NPs using jasmine extract as a reducing agent of Ag+ ions. The properties of Ag/CFO NPs were characterized by X-ray powder diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, vibrating sample magnetometry, and catalytic tests in non-radiation conditions. The catalytic results indicated that the Ag/CFO NPs could activate peroxymonosulfate to generate sulfate radicals for the decomposition of different dyes such as methylene blue, methyl orange, and rhodamine B. For the Ag/CFO sample, Ag NPs validated the roles in dye adsorption, reduction of 4-nitrophenol, and improvement of antibacterial behavior. The growth inhibition activity of Ag/CFO NPs was observed against Pseudomonas aeruginosa (18.18 ± 2.48 mm) and Staphylococcus aureus (10.14 ± 0.72 mm). Furthermore, Ag/CFO NPs displayed good reusability after three consecutive runs. Therefore, Ag/CFO material is shown to be a potential multifunctional catalyst in wastewater treatment.

Iron-Vanadium Incorporated Ferrocyanides as Potential Cathode Materials for Application in Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) are potential replacements for lithium-ion batteries owing to their comparable energy density and the abundance of sodium. However, the low potential and low stability of their cathode materials have prevented their commercialization. Prussian blue analogs are ideal cathode materials for SIBs owing to the numerous diffusion channels in their 3D structure and their high potential vs. Na/Na+. In this study, we fabricated various Fe-V-incorporated hexacyanoferrates, which are Prussian blue analogs, via a one-step synthesis. These compounds changed their colors from blue to green to yellow with increasing amounts of incorporated V ions. The X-ray photoelectron spectroscopy spectrum revealed that V3+ was oxidized to V4+ in the cubic Prussian blue structure, which enhanced the electrochemical stability and increased the voltage platform. The vanadium ferrocyanide Prussian blue (VFPB1) electrode, which contains V4+ and Fe2+ in the Prussian blue structure, showed Na insertion/extraction potential of 3.26/3.65 V vs. Na/Na+. The cycling test revealed a stable capacity of ~70 mAh g-1 at a rate of 50 mA g-1 and a capacity retention of 82.5% after 100 cycles. We believe that this Fe-V-incorporated Prussian green cathode material is a promising candidate for stable and high-voltage cathodes for SIBs.

Vanadium Ferrocyanides as a Highly Stable Cathode for Lithium-Ion Batteries.

Owing to their high redox potential and availability of numerous diffusion channels in metal-organic frameworks, Prussian blue analogs (PBAs) are attractive for metal ion storage applications. Recently, vanadium ferrocyanides (VFCN) have received a great deal of attention for application in sodium-ion batteries, as they demonstrate a stable capacity with high redox potential of ~3.3 V vs. Na/Na+. Nevertheless, there have been no reports on the application of VFCN in lithium-ion batteries (LIBs). In this work, a facile synthesis of VFCN was performed using a simple solvothermal method under ambient air conditions through the redox reaction of VCl3 with K3[Fe(CN)6]. VFCN exhibited a high redox potential of ~3.7 V vs. Li/Li+ and a reversible capacity of ~50 mAh g-1. The differential capacity plots revealed changes in the electrochemical properties of VFCN after 50 cycles, in which the low spin of Fe ions was partially converted to high spin. Ex situ X-ray diffraction measurements confirmed the unchanged VFCN structure during cycling. This demonstrated the high structural stability of VFCN. The low cost of precursors, simplicity of the process, high stability, and reversibility of VFCN suggest that it can be a candidate for large-scale production of cathode materials for LIBs.

Drug resistance and the genotypic characteristics of rpoB and katG in rifampicin- and/or isoniazid-resistant Mycobacterium tuberculosis isolates in central Vietnam

Objectives@#Tuberculosis (TB) and drug-resistant TB (DR-TB) are national health burdens in Vietnam. In this study, we investigated the prevalence of rifampicin (RIF) and/or isoniazid (isonicotinic acid hydrazide, INH) resistance in patients with suspected TB, and applied appropriate techniques to help rapidly target DR-TB. @*Methods@#In total, 1,547 clinical specimens were collected and cultured using the BACTEC MGIT system (Becton Dickinson and Co.). A resazurin microtiter assay (REMA) was used to determine the proportions of RIF and/or INH resistance. A real-time polymerase chain reaction panel with TaqMan probes was employed to identify the mutations of rpoB and katG associated with DR-TB in clinical isolates. Genotyping of the identified mutations was also performed. @*Results@#A total of 468 Mycobacterium tuberculosis isolates were identified using the REMA. Of these isolates, 106 (22.6%) were found to be resistant to 1 or both antibiotics. Of the resistant isolates, 74 isolates (69.8%) were resistant to isoniazid (INH) only, while 1 isolate (0.94%) was resistant to RIF only. Notably, 31 isolates (29.24%) were resistant to both antibiotics. Of the 41 phenotypically INH-resistant isolates, 19 (46.3%) had the Ser315Thr mutation. There were 8 different rpoB mutations in 22 (68.8%) of the RIF-resistant isolates. The most frequently detected mutations were at codons 531 (37.5%), 526 (18.8%), and 516 (6.3%). @*Conclusion@#To help prevent new cases of DR-TB in Vietnam, it is crucial to gain a comprehensive understanding of the genotypic DR-TB isolates.

Sleep Quality and Poor Sleep-related Factors Among Healthcare Workers During the COVID-19 Pandemic in Vietnam / 예방의학회지

Objectives@#The coronavirus disease 2019 (COVID-19) pandemic has increased the workload of healthcare workers (HCWs), impacting their health. This study aimed to assess sleep quality using the Pittsburgh Sleep Quality Index (PSQI) and identify factors associated with poor sleep among HCWs in Vietnam during the COVID-19 pandemic. @*Methods@#In this cross-sectional study, 1000 frontline HCWs were recruited from various healthcare facilities in Vietnam between October 2021 and November 2021. Data were collected using a 3-part self-administered questionnaire, which covered demographics, sleep quality, and factors related to poor sleep. Poor sleep quality was defined as a total PSQI score of 5 or higher. @*Results@#Participants’ mean age was 33.20±6.81 years (range, 20.0-61.0), and 63.0% were women. The median work experience was 8.54±6.30 years. Approximately 6.3% had chronic comorbidities, such as hypertension and diabetes mellitus. About 59.5% were directly responsible for patient care and treatment, while 7.1% worked in tracing and sampling. A total of 73.8% reported poor sleep quality. Multivariate logistic regression revealed significant associations between poor sleep quality and the presence of chronic comorbidities (odds ratio [OR], 2.34; 95% confidence interval [CI], 1.17 to 5.24), being a frontline HCW directly involved in patient care and treatment (OR, 1.59; 95% CI, 1.16 to 2.16), increased working hours (OR, 1.84; 95% CI,1.37 to 2.48), and a higher frequency of encountering critically ill and dying patients (OR, 1.42; 95% CI, 1.03 to 1.95). @*Conclusions@#The high prevalence of poor sleep among HCWs in Vietnam during the COVID-19 pandemic was similar to that in other countries. Working conditions should be adjusted to improve sleep quality among this population.

Cytotoxic Activities and Fingerprint Analysis of Triterpenes by HPTLC Technique for Distinguishing Ganoderma Species from Vietnam and other Asian Countries.

Ganoderma lucidum (Fr.) P. Karst. (Ganodermataceae), commonly called Linhzhi, is traditionally employed in the treatment of human diseases, including hepatitis, liver disorders, hypercholesterolemia, arthritis, bronchitis, and tumorigenic diseases. In this study, the fingerprint profiles of five different strains of G. lucidum originated from Japan, Korea, China, and Vietnam, five samples of G. lucidum growing on Erythrophloeum fordii Oliv. in Vietnam, and five related Linhzhi species (Ganoderma applanatum, Ganoderma australe, Ganoderma clossum, Ganoderma subresinosu, and Ganoderma sp.) were investigated for triterpene derivatives using high-pressure, thin-layer chromatography (HPTLC). The HPTLC fingerprint profiles demonstrated significant differences between G. lucidum and other related Linhzhi species in the presence of triterpene derivatives. Evaluation for the cytotoxicity of these samples against four cancer cell lines, including A549, MCF7, PC3, and HepG2, displayed various levels of cytotoxic effects, with IC50 values of: 15.6-46.3 µg/mL on the A549 cancer cell line, of 18.4-43.6 µg/mL on the MCF7 cancer cell line, of 10.0-32.1 µg/mL on the PC3 cancer cell line, and of 10.6-27.6 µg/mL on the HepG2 cancer cell line. Conclusively, these data contributed to the literature on the cytotoxic activities and fingerprint analysis of triterpenes by the HPTLC technique for distinguishing Ganoderma species from Vietnam and other Asian countries.

Determination of Antioxidant, Cytotoxicity, and Acetylcholinesterase Inhibitory Activities of Alkaloids Isolated from Sophora flavescens Ait. Grown in Dak Nong, Vietnam.

Traditional/herbal medicine has gained increasing interests recently, especially in Asian countries such as Vietnam, due to its diverse therapeutic actions. In the treasure of Vietnamese medicinal plants, one of the potential herbs is the roots of Sophora flavescens Ait. (SF, "Kho sam" in Vietnamese). However, limited information has been reported on the Vietnamese SF compositions and their respective alkaloids' anti-acetylcholinesterase action. Thus, this study investigated the extractions, isolations, identifications, and in-vitro antioxidant, cytotoxicity, and acetylcholinesterase inhibitory activities, of the SF root extracts and their purified alkaloid compounds. To this end, four pure compounds were successfully isolated, purity-tested by HPLC, and structurally identified by spectroscopic techniques of FTIR, MS, and NMR. These compounds, confirmed to be oxysophocarpine, oxymatrine, matrine, and sophoridine, were then determined their therapeutic actions. The SF extracts and the compounds did not possess significant antioxidant activity using the DPPH and MDA assays, and cytotoxicity action using the MTT assay on the MDA-MB-231 breast cancer cell line. On the other hand, the SF total extract yielded a moderate acetylcholinesterase inhibition effect, with an IC50 of 0.1077 ± 0.0023 mg/mL. In summary, the SF extract demonstrated potential effects as an anti-acetylcholinesterase agent and could be further researched to become a pharmaceutical product for diseases related to acetylcholine deficiency, such as dementia.

Improved photodegradation of antibiotics pollutants in wastewaters by advanced oxidation process based on Ni-doped TiO2.

The number of antibiotic compounds in wastewaters has been growing globally due to the covid-19 problem. Using antibiotics to treat the patients would produce larger amounts of these compounds into the environment with negative impacts. Hence, finding out the method for the elimination of toxic organic pollutants as well as antibiotics in water is urgent (In this study, the treatment of antibiotic pollutants including cefalexin (CF) and tetracycline (TC) was investigated by applying the advanced oxidation process based on Ni-doped TiO2 (Ni-TiO2). The characterizations technologies such as XRD, XPS, UV-vis, PL, and PC indicated that Ni doping would improve the photocatalytic performance of TiO2. In the photodegradation experiments, the Ni-TiO2 possessed high photocatalytic degradation efficiencies with 93.6% for CF and 82.5% for TC. Besides, the removal rates of antibiotics after five cycles are higher than 75%, implying excellent stability of Ni-TiO2 photocatalyst. The result from the treatment of wastewater samples revealed that the Ni-TiO2 photocatalytic had good performance for removal of CF and TC at a high level of 88.6 and 80.2%, respectively.

In Situ Growth of W2C/WS2 with Carbon-Nanotube Networks for Lithium-Ion Storage.

The combination of W2C and WS2 has emerged as a promising anode material for lithium-ion batteries. W2C possesses high conductivity but the W2C/WS2-alloy nanoflowers show unstable performance because of the lack of contact with the leaves of the nanoflower. In this study, carbon nanotubes (CNTs) were employed as conductive networks for in situ growth of W2C/WS2 alloys. The analysis of X-ray diffraction patterns and scanning/transmission electron microscopy showed that the presence of CNTs affected the growth of the alloys, encouraging the formation of a stacking layer with a lattice spacing of ~7.2 Å. Therefore, this self-adjustment in the structure facilitated the insertion/desertion of lithium ions into the active materials. The bare W2C/WS2-alloy anode showed inferior performance, with a capacity retention of ~300 mAh g-1 after 100 cycles. In contrast, the WCNT01 anode delivered a highly stable capacity of ~650 mAh g-1 after 100 cycles. The calculation based on impedance spectra suggested that the presence of CNTs improved the lithium-ion diffusion coefficient to 50 times that of bare nanoflowers. These results suggest the effectiveness of small quantities of CNTs on the in situ growth of sulfides/carbide alloys: CNTs create networks for the insertion/desertion of lithium ions and improve the cyclic performance of metal-sulfide-based lithium-ion batteries.

Boron Oxide Enhancing Stability of MoS2 Anode Materials for Lithium-Ion Batteries.

Molybdenum disulfide (MoS2) is the most well-known transition metal chalcogenide for lithium storage applications because of its simple preparation process, superior optical, physical, and electrical properties, and high stability. However, recent research has shown that bare MoS2 nanosheet (NS) can be reformed to the bulk structure, and sulfur atoms can be dissolved in electrolytes or form polymeric structures, thereby preventing lithium insertion/desertion and reducing cycling performance. To enhance the electrochemical performance of the MoS2 NSs, B2O3 nanoparticles were decorated on the surface of MoS2 NSs via a sintering technique. The structure of B2O3 decorated MoS2 changed slightly with the formation of a lattice spacing of ~7.37 Å. The characterization of materials confirmed the formation of B2O3 crystals at 30% weight percentage of H3BO3 starting materials. In particular, the MoS2_B3 sample showed a stable capacity of ~500 mAh·g-1 after the first cycle. The cycling test delivered a high reversible specific capacity of ~82% of the second cycle after 100 cycles. Furthermore, the rate performance also showed a remarkable recovery capacity of ~98%. These results suggest that the use of B2O3 decorations could be a viable method for improving the stability of anode materials in lithium storage applications.

Driving factors to air pollutant reductions during the implementation of intensive controlling policies in 2020 in Ulsan, South Korea.

Evaluation for the controlling policy's effectiveness to mitigate criteria air pollutants (CAPs) in South Korea during December 1, 2019-March 31, 2020 is difficult because of its coincidence with the COVID-19 social distancing. In this study, we differentiated the influence of three major driving factors (intensive controlling policy by the government, meteorological conditions, and social distancing) to the CAP variation in Ulsan, the largest industrial city in South Korea. In 2013-2019, the concentrations of PM2.5 (2015-2019), PM10, SO2, and NO2 decreased by 6.7, 1.6, 4.2, and 3.3%/year, respectively, whereas the O3 concentration slightly increased by 0.7%/year. Trend analysis was used to predict the CAP concentrations before (January 1-February 21) and during (February 22-March 31) the social distancing in 2020. The difference between the measured and predicted concentrations was designated as the contribution of the three factors. The controlling policy was the most important driver of the CAP reductions. In particular, its contributions were 94.1% (January 1-February 21) and 87.4% (February 22-March 31) to the PM2.5 decrease. The change in meteorological conditions considerably affected the CAP reductions, with the highest contributions of 35.2% (January 1-February 21) and 39.2% (February 22-March 31) to the O3 decrease. On February 22-March 31, the effects of social distancing were 1.6, 0.6, 1.3, and 1.4% to the reduction of SO2, NO2, PM10, and PM2.5, respectively. Overall, a decrease in the CAP concentrations was apparent during January-March 2020 in Ulsan primarily due to the intensive controlling policies, not by the COVID-19 social distancing.

Application of gas chromatographic retention times to determine physicochemical properties of nitrated, oxygenated, and parent polycyclic aromatic hydrocarbons.

Nitrated and oxygenated polycyclic aromatic hydrocarbons (NPAHs and OPAHs) are receiving attention because of their high toxicity compared with parent PAHs. However, the experimental data of their physicochemical properties has been limited. This study proposed the gas chromatographic retention time (GC-RT) technique as an effective alternative one to determine octanol-air partition coefficients (KOA) and sub-cooled liquid vapor pressures (PL) for 11 NPAHs, 10 OPAHs, and 19 parent PAHs. The slopes and intercepts of the linear regressions between temperature versus KOA and PL were provided and can be used to estimate KOA and PL for the 40 targeted compounds at any temperature. The internal energies of phase transfer (ΔUOA) and enthalpies of vaporization (ΔHL) for all targeted compounds were also calculated using the GC-RT technique. High-molecular-weight compounds may release or absorb higher heat energy to transform between different phases. NPAHs and OPAHs had a non-ideal solution behavior with activity in octanol (γoct) in the range of 19-53 and 18-1,078, respectively, which is larger than the unity threshold. A comparison among four groups of PAH derivatives showed that a functional group (nitro-, oxygen-, chloro-, and bromo-) in PAH derivatives increased γoct for corresponding parent PAHs by tens (mono-group) to hundreds of times (di-group). This study suggests that the GC-RT method is applicable for indirectly measuring the physicochemical properties of various groups of organic compounds.

WS2-WC-WO3 nano-hollow spheres as an efficient and durable catalyst for hydrogen evolution reaction.

Transition metal dichalcogenides (TMDs), transition metal carbides (TMCs), and transition metal oxides (TMOs) have been widely investigated for electrocatalytic applications owing to their abundant active sites, high stability, good conductivity, and various other fascinating properties. Therefore, the synthesis of composites of TMDs, TMCs, and TMOs is a new avenue for the preparation of efficient electrocatalysts. Herein, we propose a novel low-cost and facile method to prepare TMD-TMC-TMO nano-hollow spheres (WS2-WC-WO3 NH) as an efficient catalyst for the hydrogen evolution reaction (HER). The crystallinity, morphology, chemical bonding, and composition of the composite material were comprehensively investigated using X-ray diffraction, Raman spectroscopy, field emission scanning electron microscopy, and X-ray photoelectron spectroscopy. The results confirmed the successful synthesis of the WS2-WC-WO3 NH spheres. Interestingly, the presence of nitrogen significantly enhanced the electrical conductivity of the hybrid material, facilitating electron transfer during the catalytic process. As a result, the WS2-WC-WO3 NH hybrid exhibited better HER performance than the pure WS2 nanoflowers, which can be attributed to the synergistic effect of the W-S, W-C, and W-O bonding in the composite. Remarkably, the Tafel slope of the WS2-WC-WO3 NH spheres was 59 mV dec-1, which is significantly lower than that of the pure WS2 NFs (82 mV dec-1). The results also confirmed the unprecedented stability and superior electrocatalytic performance of the WS2-WC-WO3 NH spheres toward the HER, which opens new avenues for the preparation of low-cost and highly effective materials for energy conversion and storage applications.

Biosorbent derived from coffee husk for efficient removal of toxic heavy metals from wastewater.

In this study, we investigated the feasibility on the utilization of coffee husk as biosorbents for the removal of heavy metal ions such as Pb2+ and Cd2+ from wastewater. Biochar was produced from coffee wastes and modified with sodium hydroxide to create functional groups on the surface and increase the specificic surface area. The resultant products were characterized by using various analytical methods such as scanning electron microscopy, specific area, surface functional group and zeta potential analysis. The as-prepared materials were employed as adsorbent to remove Pb2+ and Cd2+ ions from wastewater. The maximum sorption capacities of biosorbents were measured to be 116.3 and 139.5 mg g-1 for Cd2+ and Pb2+, respectively, which is comparable to the conventional adsorbents. Kinetic studies showed that the sorption of Pb2+ and Cd2+ on biosorbents can be described by the Freundlich isotherm and second-order kinetic model. The coffee husk-derived biosorbent was capable of removing 89.6% of Pb2+ and 81.5% Cd2+ ions from wastewater, and therefore can be considered as low-cost and efficient adsorbent to remove heavy metal ions from wastewater.

Metal salt-modified biochars derived from agro-waste for effective congo red dye removal.

Anionic Congo red dye (CR) is not effectively removed by conventional adsorbents. Three novel biochars derived from agro-waste (Acacia auriculiformis), modified with metal salts of FeCl3, AlCl3, and CaCl2 at 500 °C pyrolysis have been developed to enhance CR treatment. These biochars revealed significant differences in effluents compared to BC, which satisfied initial research expectations (P < 0.05). The salt concentration of 2 M realized optimal biochars with the highest CR removal of 96.8%, for AlCl3-biochar and FeCl3-biochar and 70.8% for CaCl2-biochar. The modified biochars were low in the specific surface area (137.25-380.78 m2 g-1) compared normal biochar (393.15 m2 g-1), had more heterogeneous particles and successfully integrated metal oxides on the surface. The CR removal increased with a decrease in pH and increase in biochar dosage, which established an optimal point at an initial loading of 25 mg g-1. Maximum adsorption capacity achieved 130.0, 44.86, and 30.80 mg g-1 for BFe, BCa, and BAl, respectively. As magnetic biochar, which is easily separated from the solution and achieves a high adsorption capacity, FeCl3-biochar is the preferred biochar for CR treatment application.

Enhanced recovery of phosphate as a value-added product from wastewater by using lanthanum modified carbon-fiber.

The aim of this study is to present the potential of activated carbon fiber (CF) impregnated with lanthanum (La) as a novel adsorbent (La-CF) of phosphate-phosphorus (P) and to assess the value-added due to P-recovery from wastewater using La-CF. The CF were loaded with La and the loaded CF was then calcined at 500 °C. The La-CF adsorbent was used in a series of batch experiments to characterize the adsorption of P at pH of 6-10 and P concentrations of 1-200 mg/L. Physical-chemical properties such as surface morphology, surface charge, surface area, and surface chemistry were determined for the La-CF. The La-CF exhibited adsorption capacity of 196.5 mg/g, fast sorption kinetics and high selectivity for P removal from aqueous solution. La-CF removed 97.3% of P from wastewater and achieved P-level to below 2 mg/L. It was repetitively reused over 10 times in successive cycles to remove P from wastewater. The value-added by recovery of P from wastewater was calculated at around 0.12 US$/L, demonstrating economic benefits of La-CF. In conclusion, the successful removal, recycling, and recovery value-added of P using La-CF adsorbent displayed good potential for developing the technology for treatment of wastewaters to recover valuable compounds such as phosphorus.

Ag Nanoparticle-Decorated MoS2 Nanosheets for Enhancing Electrochemical Performance in Lithium Storage.

Metallic phase 1T MoS2 is a well-known potential anode for enhancing the electrochemical performance of lithium-ion batteries owing to its mechanical/chemical stability and high conductivity. However, during the lithiation/delithiation process, MoS2 nanosheets (NSs) tend to restack to form bulky structures that deteriorate the cycling performance of bare MoS2 anodes. In this study, we prepared Ag nanoparticle (NP)-decorated 1T MoS2 NSs via a liquid exfoliation method with lithium intercalation and simple reduction of AgNO3 in NaBH4. Ag NPs were uniformly distributed on the MoS2 surface with the assistance of 3-mercapto propionic acid. Ag NPs with the size of a few nanometers enhanced the conductivity of the MoS2 NS and improved the electrochemical performance of the MoS2 anode. Specifically, the anode designated as Ag3@MoS2 (prepared with AgNO3 and MoS2 in a weight ratio of 1:10) exhibited the best cycling performance and delivered a reversible specific capacity of 510 mAh·g-1 (approximately 73% of the initial capacity) after 100 cycles. Moreover, the rate performance of this sample had a remarkable recovery capacity of ~100% when the current decreased from 1 to 0.1 A·g-1. The results indicate that the Ag nanoparticle-decorated 1T MoS2 can be employed as a high-rate capacity anode in lithium-ion storage applications.