The completely renewed and upgraded neutron reflectometer at the TU Delft Reactor Institute.

The horizontal time-of-flight neutron reflectometer at the reactor of the Delft University of Technology, The Netherlands, has been completely renewed, relocated, and upgraded and allows for the study of air/liquid, solid/liquid, and solid/air interfaces. Innovations in the redesign include (i) a completely flexible double disk chopper system allowing to choose the optimal wavelength resolution with exchangeable neutron guide sections between the chopper disks to increase intensity, (ii) a movable second diaphragm just before the sample position to better control the beam footprint on the sample and effectively decrease counting times, and (iii) guides along the entire flight path of the neutron reflectometer. The performance of the renewed reflectometer is illustrated with measurements of hydrogen sensing materials.

Structural Studies and Thermal Analysis in the Cs2MoO4-PbMoO4 System with Elucidation of ß-Cs2Pb(MoO4)2.

The quaternary compound Cs2Pb(MoO4)2 was synthesized and its structure was characterized using X-ray and neutron diffraction from 298 to 773 K, while thermal expansion was studied from 298 to 723 K. The crystal structure of the high-temperature phase ß-Cs2Pb(MoO4)2 was elucidated, and it was found to crystallize in the space group R3̅m (No. 166), i.e., with a palmierite structure. In addition, the oxidation state of Mo in the low-temperature phase α-Cs2Pb(MoO4)2 was studied using X-ray absorption near-edge structure spectroscopy. Phase diagram equilibrium measurements in the Cs2MoO4-PbMoO4 system were performed, revisiting a previously reported phase diagram. The equilibrium phase diagram proposed here includes a different composition of the intermediate compound in this system. The obtained data can serve as relevant information for thermodynamic modeling in view of the safety assessment of next-generation lead-cooled fast reactors.

Investigation of Structure, Ionic Conductivity, and Electrochemical Stability of Halogen Substitution in Solid-State Ion Conductor Li3YBr x Cl6-x.

Li3YX6 (X = Cl, Br) materials are Li-ion conductors that can be used as solid electrolytes in all solid-state batteries. Solid electrolytes ideally have high ionic conductivity and (electro)chemical compatibility with the electrodes. It was proven that introducing Br to Li3YCl6 increases ionic conductivity but, according to thermodynamic calculations, should also reduce oxidative stability. In this paper, the trade-off between ionic conductivity and electrochemical stability in Li3YBr x Cl6-x halogen-substituted compounds is investigated. The compositions of Li3YBr1.5Cl4.5 and Li3YBr4.5Cl1.5 are reported for the first time, along with a consistent analysis of the whole Li3YBr x Cl6-x (x = 0-6) tie-line. The results show that, while Br-rich materials are more conductive (5.36 × 10-3 S/cm at 30 °C for x = 4.5), the oxidative stability is lower (∼3 V compared to ∼3.5 V). Small Br content (x = 1.5) does not affect oxidative stability but substantially increases ionic conductivity compared to pristine Li3YCl6 (2.1 compared to 0.049 × 10-3 S/cm at 30 °C). This work highlights that optimization of substitutions in the anion framework provide prolific and rational avenues for tailoring the properties of solid electrolytes.

BLOSM: Boron-based large-scale observation of soil moisture: First laboratory results of a cost-efficient neutron detector.

A newly developed Boron-based Large-scale Observation of Soil Moisture (or BLOSM) system is currently being tested and implemented. The stationary system provides a cost-effective way to measure fast and thermalized neutrons by using low-cost, non-hazardous and accessible materials and equipment. BLOSM operates by measuring cosmic-ray induced neutrons and by comparing the amount of fast neutrons with the amount of thermal neutrons. Fast neutrons are moderated by hydrogen atoms in the air, organic materials, and especially and primarily by water in the soil, causing the ratio between fast and thermal to be a strong indicator of soil moisture content. The fast/thermal ratio is representative for soil moisture a scale of about 30 hectares, while standard soil moisture measurements are representative for less than a square meter. This is a well-established fact but present neutron detectors are very costly. Thanks to the low-cost of the probe, BLOSM can eventually be applied at a large scale and significantly increase the number of soil-water data points thereby enabling improvement of existing hydrology models as well as new applications such as monitoring fire hazards and agricultural droughts. Here, we present the build and first tests in the laboratory. We show that BLOSM can indeed measure fast and thermal neutrons, which opens the way to applications outside the laboratory.

High dielectric barium titanate porous scaffold for efficient Li metal cycling in anode-free cells.

Li metal batteries are being intensively investigated as a means to achieve higher energy density when compared with standard Li-ion batteries. However, the formation of dendritic and mossy Li metal microstructures at the negative electrode during stripping/plating cycles causes electrolyte decomposition and the formation of electronically disconnected Li metal particles. Here we investigate the use of a Cu current collector coated with a high dielectric BaTiO3 porous scaffold to suppress the electrical field gradients that cause morphological inhomogeneities during Li metal stripping/plating. Applying operando solid-state nuclear magnetic resonance measurements, we demonstrate that the high dielectric BaTiO3 porous scaffold promotes dense Li deposition, improves the average plating/stripping efficiency and extends the cycling life of the cell compared to both bare Cu and to a low dielectric scaffold material (i.e., Al2O3). We report electrochemical tests in full anode-free coin cells using a LiNi0.8Co0.1Mn0.1O2-based positive electrode and a LiPF6-based electrolyte to demonstrate the cycling efficiency of the BaTiO3-coated Cu electrode.

Neutron Diffraction Study of a Sintered Iron Electrode In Operando.

Iron is a promising, earth-abundant material for future energy applications. In this study, we use a neutron diffractometer to investigate the properties of an iron electrode in an alkaline environment. As neutrons penetrate deeply into materials, neutron scattering gives us a unique insight into what is happening inside the electrode. We made our measurements while the electrode was charging or discharging. Our key questions are: Which phases occur for the first and second discharge plateaus? And why are iron electrodes less responsive at higher discharge rates? We conclude that metallic iron and iron hydroxide form the redox pair for the first discharge plateau. For the second discharge plateau, we found a phase similar to feroxyhyte but with symmetrical and equally spaced arrangement of hydrogen atoms. The data suggest that no other iron oxide or iron (oxy)hydroxide formed. Remarkable findings include the following: (1) substantial amounts of iron hydroxide are always present inside the electrode. (2) Passivation is mostly caused by iron hydroxide that is unable to recharge. (3) Iron fractions change as expected, while iron hydroxide fractions are delayed, resulting in substantial amounts of amorphous, undetectable iron phases. About 40% of the participating iron of the first plateau and about 55% of the participating iron for the second plateau are undetectable. (4) Massive and unexpected precipitation of iron hydroxide occurs in the transition from discharging to charging. (2), (3), and (4) together cause accumulation of iron hydroxide inside the electrode.

Decomposing Magnetic Dark-Field Contrast in Spin Analyzed Talbot-Lau Interferometry: A Stern-Gerlach Experiment without Spatial Beam Splitting.

We have recently shown how a polarized beam in Talbot-Lau interferometric imaging can be used to analyze strong magnetic fields through the spin dependent differential phase effect at field gradients. While in that case an adiabatic spin coupling with the sample field is required, here we investigate a nonadiabatic coupling causing a spatial splitting of the neutron spin states with respect to the external magnetic field. This subsequently leads to no phase contrast signal but a loss of interferometer visibility referred to as dark-field contrast. We demonstrate how the implementation of spin analysis to the Talbot-Lau interferometer setup enables one to recover the differential phase induced to a single spin state. Thus, we show that the dark-field contrast is a measure of the quantum mechanical spin split analogous to the Stern-Gerlach experiment without, however, spatial beam separation. In addition, the spin analyzed dark-field contrast imaging introduced here bears the potential to probe polarization dependent small-angle scattering and thus magnetic microstructures.

Mesoporous Silica Formation Mechanisms Probed Using Combined Spin-Echo Modulated Small-Angle Neutron Scattering (SEMSANS) and Small-Angle Neutron Scattering (SANS).

The initial formation stages of surfactant-templated silica thin films which grow at the air-water interface were studied using combined spin-echo modulated small-angle neutron scattering (SEMSANS) and small-angle neutron scattering (SANS). The films are formed from either a cationic surfactant or nonionic surfactant (C16EO8) in a dilute acidic solution by the addition of tetramethoxysilane. Previous work has suggested a two stage formation mechanism with mesostructured particle formation in the bulk solution driving film formation at the solution surface. From the SEMSANS data, it is possible to pinpoint accurately the time associated with the formation of large particles in solution that go on to form the film and to show their emergence is concomitant with the appearance of Bragg peaks in the SANS pattern, associated with the two-dimensional hexagonal order. The combination of SANS and SEMSANS allows a complete depiction of the steps of the synthesis that occur in the subphase.