A Gelatin-Based Biomimetic Scaffold Promoting Osteogenic Differentiation of Adipose-Derived Mesenchymal Stem Cells.

Background: In bone tissue engineering segment, numerous approaches have been investigated to address critically sized bone defects via 3D scaffolds, as the amount of autologous bone grafts are limited, accompanied with complications on harvesting. Moreover, the use of bone-marrow-derived stem cells is also a limiting factor owing to the invasive procedures involved and the low yield of stem cells. Hence, research is ongoing on the search for an ideal bone graft system promoting bone growth and regeneration. Purpose of the Study: This study aims to develop a unique platform for tissue development via stem cell differentiation towards an osteogenic phenotype providing optimum biological cues for cell adhesion, differentiation and proliferation using biomimetic gelatin-based scaffolds. The use of adipose-derived mesenchymal stem cells in this study also offers an ideal approach for the development of an autologous bone graft. Methods: A gelatin-vinyl acetate-based 3D scaffold system incorporating Bioglass was developed and the osteogenic differentiation of adipose-derived mesenchymal stem cells (ADMSCs) on the highly porous freeze-dried gelatin-vinyl acetate/ Bioglass scaffold (GB) system was analyzed. The physicochemical properties, cell proliferation and viability were investigated by seeding rat adipose tissue-derived mesenchymal stem cells (ADSCs) onto the scaffolds. The osteogenic differentiation potential of the ADMSC seeded GeVAc/bioglass system was assessed using calcium deposition assay and bone-related protein and genes and comparing with the 3D Gelatin vinyl acetate coppolymer (GeVAc) constructs. Results and Conclusion: According to the findings, the 3D porous GeVAc/bioglass scaffold can be considered as a promising matrix for bone tissue regeneration and the 3D architecture supports the differentiation of the ADMSCs into osteoblast cells and enhances the production of mineralized bone matrix.

Physico chemical characterisation of pectin incorporated gelatin sponge and its functional evaluation in modulating contact activation haemostasis.

Even though it is a common occurrence in practice, maintaining haemostasis can sometimes become a challenging issue in case of trauma, perioperative period, coagulation disorders, cancers, etc. Hemostatic materials are extensively used to assist in the cessation of bleeding. However, the definition of efficiency of haemostasis varies between intended procedures. This paper explores the feasibility of incorporating agents to increase the efficiency of local haemostasis. Pectin or ß -D galacto hexopyranuronic acid/ß Gal A, a structural polysaccharide widely present in terrestrial plants having an intrinsic hemostatic potential, is blended with gelatin and is explored in modulating passive haemostasis. The sponges are physico chemically characterized, and their hemostatic efficiency is evaluated in vitro using various assays. Biocompatibility evaluation is done by in vitro cytotoxicity assay. The results suggest that this biopolymer combination is a promising candidate for hemostatic control.

Designer injectable matrices of photocrosslinkable carboxymethyl cellulose methacrylate based hydrogels as cell carriers for gel type autologous chondrocyte implantation (GACI).

Gel-type autologous chondrocyte implantation (GACI) is the fourth-generation therapeutic strategy that has been introduced to address the limitations of earlier generation strategies, especially problems related to cell leakage upon implantation and loss of chondrocyte functionality owing to the dedifferentiation of cells in culture and fibrocartilage formation. In GACI, an injectable gel system is used, which acts as the cell carrier. However, the maintenance of the morphology and redifferentiation of chondrocytes with appropriate biofunctionality are major challenges in this technique. In this study, we prepared a photocrosslinkable injectable hydrogel based on carboxymethyl cellulose-methacrylate (CMC-MA) and polyethylene glycol diacrylate (PEGDA) and evaluated chondrocyte-matrix interactions and biofunctionality on different blend ratios of the gels with varying stiffness. Cell-matrix interaction was evaluated by immunostaining for actin filaments via phalloidin and cell adhesion markers such as focal adhesion kinase (FAK), integrin ß1, and integrin αV. This study indicates that the stiffness of the substrates, along with the material chemistry, is a crucial factor when selecting an injectable gel-based system. Stiffer gels (2:8 CMC-MA/PEGDA) showed good chondrocyte cell attachment and growth with maintenance of the redifferentiated phenotype; therefore, they can be considered as an ideal matrix for GACI technique.

3D-printed polyurethane immunoisolation bags with controlled pore architecture for macroencapsulation of islet clusters encapsulated in alginate gel.

Diabetes mellitus is a fast-growing chronic metabolic condition caused by insulin deficiency or resistance, leading to lifelong insulin use. It has become one of the world's most difficult non-communicable diseases. The goal of this study was to view the effectiveness of the combined method of macro- and microencapsulation for islet transplantation. The process of 3D printing is used to make macroencapsulation bags with regulated diffusion properties thanks to the emerging small pored channels. The ink used to manufacture 3D-printed bags with controlled specifications was polyurethane solution (13% w/v). Swelling experiments revealed that there was very little swelling and that the membrane maintained its structural stability. Alginate beads (made from 5% w/v solution) were used to microencapsulate islet cell clusters. Direct contact assay was used to confirm in vitro cytocompatibility. The insulin release from the encapsulated rabbit islets was confirmed using a glucose challenge assay. When challenged with 20 mM glucose on day 7, the encapsulated islet cells released insulin at a rate of 9.72 ± 0.65 mU/L, which was identical to the RIN-5F islet cell line control, confirming the functioning of the encapsulated islets. After 21 days of culture, the islets were shown to be viable utilizing a live-dead assay. As a result, our work demonstrates that 3D printing for macroencapsulating cells, as well as microencapsulation with alginates, is a viable scale-up technology with great potential in the field of pancreatic islet transplantation.

Three-dimensional wet electrospun scaffold system for the differentiation of adipose-derived mesenchymal stem cells to islet-like clusters.

Stem cell-derived islet-like clusters (ILCs) are an alternative source of pancreatic beta cells for the treatment of diabetic mellitus. An ideal 3D culture platform for the generation of ILCs of desired cluster size is a challenge due to the clustering of islet cells in the 2D culture systems. The islet cells cultured in 2D conditions produce clusters of large size, which are less efficient in terms of insulin secretion and viability. In this study, we report that ILCs formed on a PCL-based wet electrospun fibrous scaffold with larger pore size produced clusters of the desired size, compared to that cultured on a conventional electrospun sheet. The collagen functionalization on this wet electrospun polycaprolactone (PCL) scaffold showed enhanced insulin secretion and cell viability compared to the non-functionalized or conventionally electrospun PCL scaffold. The collagen-coated wet electrospun 3D scaffold produced ILCs of cluster diameter 70 ± 20 µm and the conventionally electrospun PCL sheet produced larger ILC clusters of diameter 300 ± 10 µm. Hence the results indicate the collagen-functionalized wet electrospun scaffold system could be a potential scaffold for islet tissue engineering.

Assessing the 3D Printability of an Elastomeric Poly(caprolactone-co-lactide) Copolymer as a Potential Material for 3D Printing Tracheal Scaffolds.

The advent of 3D printing technology has made remarkable progress in the field of tissue engineering. Yet, it has been challenging to reproduce the desired mechanical properties of certain tissues by 3D printing. This was majorly due to the lack of 3D printable materials possessing mechanical properties similar to the native tissue. In this study, we have synthesized four different ratios of poly(caprolactone-co-lactide (PLCL) and tested their 3D printing capabilities. The physicochemical properties of the material were characterized using Fourier-transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Furthermore, the mechanical properties were assessed using the universal testing machine (UTM). The ratio with the higher lactide content was found to have better printability. Out of the different ratios assessed, a suitable ratio having the desired mechanical properties and printability was identified and 3D printed into a tracheal scaffold. Thus, PLCL can be a potential material for 3D printing of tissues like the trachea.

Advancement of Scaffold-Based 3D Cellular Models in Cancer Tissue Engineering: An Update.

The lack of traditional cancer treatments has resulted in an increased need for new clinical techniques. Standard two-dimensional (2D) models used to validate drug efficacy and screening have a low in vitro-in vivo translation potential. Recreating the in vivo tumor microenvironment at the three-dimensional (3D) level is essential to resolve these limitations in the 2D culture and improve therapy results. The physical and mechanical environments of 3D culture allow cancer cells to expand in a heterogeneous manner, adopt different phenotypes, gene and protein profiles, and develop metastatic potential and drug resistance similar to human tumors. The current application of 3D scaffold culture systems based on synthetic polymers or selected extracellular matrix components promotes signalling, survival, and cancer cell proliferation. This review will focus on the recent advancement of numerous 3D-based scaffold models for cancer tissue engineering, which will increase the predictive ability of preclinical studies and significantly improve clinical translation.

Chemokine SDF1 Mediated Bone Regeneration Using Biodegradable Poly(D,L-lactide-co-glycolide) 3D Scaffolds and Bone Marrow-Derived Mesenchymal Stem Cells: Implication for the Development of an "Off-the-Shelf" Pharmacologically Active Construct.

There is an increasing need for bone substitutes for reconstructive orthopedic surgery following removal of bone tumors. Despite the advances in bone regeneration, the use of autologous mesenchymal stem cells (MSC) presents a significant challenge, particularly for the treatment of large bone defects in cancer patients. This study aims at developing new chemokine-based technology to generate biodegradable scaffolds that bind pharmacologically active proteins for regeneration/repair of target injured tissues in patients. Primary MSC were cultured from the uninvolved bone marrow (BM) of cancer patients and further characterized for "stemness". Their ability to differentiate into an osteogenic lineage was studied in 2D cultures as well as on 3D macroporous PLGA scaffolds incorporated with biomacromolecules bFGF and homing factor chemokine stromal-cell derived factor-1 (SDF1). MSC from the uninvolved BM of cancer patients exhibited properties similar to that reported for MSC from BM of healthy individuals. Macroporous PLGA discs were prepared and characterized for pore size, architecture, functional groups, thermostability, and cytocompatibility by ESEM, FTIR, DSC, and CCK-8 dye proliferation assay, respectively. It was observed that the MSC+PLGA+bFGF+SDF1 construct cultured for 14 days supported significant cell growth, osteo-lineage differentiation with increased osteocalcin expression, alkaline phosphatase secretion, calcium mineralization, bone volume, and soluble IL6 compared to unseeded PLGA and PLGA+MSC, as analyzed by confocal microscopy, biochemistry, ESEM, microCT imaging, flow cytometry, and EDS. Thus, chemotactic biomacromolecule SDF1-guided tissue repair/regeneration ability of MSC from cancer patients opens up the avenues for development of "off-the-shelf" pharmacologically active construct for optimal repair of the target injured tissue in postsurgery cancer patients, bone defects, damaged bladder tissue, and radiation-induced skin/mucosal lesions.

A nonadherent chitosan-polyvinyl alcohol absorbent wound dressing prepared via controlled freeze-dry technology.

In modern-day 21st century, the demand has increased for absorbent dressings that are nonadherent and maintain structural integrity without shedding lint in the wound site. This study looks at the development of a blend of polysaccharide chitosan and polyvinyl alcohol (PVA) and its fabrication using a novel controlled freeze-drying process, thus giving it channeled pores. The dressing was assessed for in vitro physical properties such as fluid handling, mechanical integrity, bioadhesion, and blood clotting. Additionally, cytocompatibility and hemocompatibility tests were conducted. An in vitro wound-healing assay was performed to determine the healing response. Furthermore, toxicological safety evaluation tests such as acute systemic toxicity, skin irritation, and sensitization were conducted. The results revealed that the developed dressing was biocompatible with a good absorbency rate of 0.63 ± 0.13 g/cm2, enhanced mechanical integrity, and low bioadhesive strength with good healing characteristics and nontoxic nature, which indicated that it was an ideal nonadherent absorbent wound dressing.

Effect of stiffness of chitosan-hyaluronic acid dialdehyde hydrogels on the viability and growth of encapsulated chondrocytes.

Substrate elasticity or stiffness can influence the phenotypic and functional characteristics of chondrocytes. This work aimed to study the effect of varying stiffness compositions of a two-component injectable hydrogel based on chitosan (CH) and oxidized hyaluronic acid (HDA) on the growth and functionality of encapsulated chondrocytes. Three different ratios of the gel were prepared (10:1,10:3 and 10:5 CH-HDA) and characterized. The stiffness of the gels was evaluated from the force displacement curves using force spectroscopy AFM analysis. Rabbit articular chondrocytes were harvested and the cells from Passage 2 to 4 were used for the encapsulation study. The viability and ECM production of encapsulated chondrocytes were assessed at 7day, 14day and 28day post culture. The results of the study show that as the ratio of hyaluronic acid dialdehyde component was increased, the stiffness of the gels increased from 130.78±19.83kPa to 181.47±19.77kPa which was also evidenced from the decrease in gelling time. Although there was an increase in the percentage of viable encapsulated cells which also maintained the spherical phenotype in the less stiff gels, decreased expression of ECM markers- Collagen type II and Glycosaminoglycans was observed compared to the stiffer gels. These findings indicate that gel stiffness strongly impacts the chondrocyte microenvironment both in maintenance of phenotypic integrity and ECM production.

Pulmonary surfactant expression analysis--role of cell-cell interactions and 3-D tissue-like architecture.

Surfactant production is important in maintaining alveolar function both in vivo and in vitro, but surfactant expression is the primary property lost by alveolar Type II Pneumocytes in culture and its maintenance is a functional requirement. To develop a functional tissue-like model, the in vivo cell-cell interactions and three dimensional architecture has to be reproduced. To this end, 3D button-shaped synthetic gelatin vinyl acetate (GeVAc) co-polymer scaffold was seeded with different types of lung cells. Functionality of the construct was studied under both static and dynamic conditions. The construct was characterized by Environmental Scanning Electron and fluorescent microscopy, and functionality of the system was analyzed by studying mRNA modulations of all four surfactant genes A, B, C, and D by real time-PCR and varying culture conditions. The scaffold supports alveolar cell adhesion and maintenance of cuboidal morphology, and the alveolar-specific property of surfactant synthesis, which would otherwise be rapidly lost in culture. This is a novel 3D system that expresses all 4 surfactants for a culture duration of 3 weeks.

The effect of pulsatile loading and scaffold structure for the generation of a medial equivalent tissue engineered vascular graft.

A reliable and cost-effective scaffold for tissue-engineered vascular graft that would not only support cell proliferation and growth but also maintain cell phenotype has been a long-term challenge. In this study, we propose a biodegradable and biomimetic copolymer of gelatin with vinyl acetate synthesized via a graft copolymerization technique to generate tubular scaffolds for vascular tissue engineering. Two fabrication techniques, freeze drying and electrospinning, were used to generate the differing architectures for the scaffolds and characterized. The electrospun scaffolds were found to have a faster rate of mass loss in physiological saline of 81.72% within 4 months compared with 60% mass loss for the freeze-dried samples, though the materials were more crystalline. Vascular (v) smooth muscle cells (SMCs) were seeded on these tubes, which were then subjected to dynamic pulsatile stimulation on a vascular bioreactor for a week. Gross examination of the tissue-engineered constructs revealed that the cells secreted extensive extracellular matrix, with the dynamically conditioned samples exhibiting well-orientated SMCs and collagenous fibers in comparison with growth in static conditions. In addition, the alignment of cells in the direction of strain was greater in the electrospun constructs. The electrospun scaffolds maintained the characteristic contractile phenotype of SMCs, which was confirmed by higher gene expression rates of contractile protein markers like SM22α and calponin. A significant increase in the total matrix components (collagen and elastin) in the electrospun constructs compared with the freeze-dried samples was confirmed by biochemical analysis. The results of this study indicate that a combination approach involving a biomimetic scaffold with the nanofibrillar architecture and good mechanical strength conducive to the growth of SMCs and the use of the pulsatile forces to modulate the cell morphology and phenotypic plasticity of vSMCs helps in the successful engineering of a medial layer of blood vessel.

Tissue engineered vascular grafts--preclinical aspects.

Tissue engineering enables the development of fully biological vascular substitutes that restore, maintain and improve tissue function in a manner identical to natural host tissue. However the development of the appropriate preclinical evaluation techniques for the generation of fully functional tissue-engineered vascular graft (TEVG) is required to establish their safety for use in clinical trials and to test clinical effectiveness. This review gives an insight on the various preclinical studies performed in the area of tissue engineered vascular grafts highlighting the different strategies used with respect to cells and scaffolds, typical animal models used and the major in vivo evaluation studies that have been carried out. The review emphasizes the combined effort of engineers, biologists and clinicians which can take this clinical research to new heights of regenerative therapy.

Influence of mechanical stimulation in the development of a medial equivalent tissue-engineered vascular construct using a gelatin-g-vinyl acetate co-polymer scaffold.

Vascular regeneration in the area of small diameter (<6 mm) vessels via the tissue-engineering approach has been in focus for some time now. In this study, we report the development and evaluation of a tissue-engineered medial equivalent using gelatin-g-vinyl acetate co-polymer (GeVAc) as the scaffold material. GeVAc was synthesized by co-polymerizing gelatin and vinyl acetate monomer in the presence of AIBN as the initiator and subjected to physico-chemical characterization. A porous 3-D scaffold with open interconnected pores was then produced from GeVAc. The scaffold is non-cytotoxic with good smooth muscle cell proliferative capacity and high cell viability. Influence of smooth muscle cell phenotype in response to these scaffolds has been studied under mechanical stimulation. It was found that the cell-seeded tubular GeVAc constructs under mechanical stimulation preferentially supported the contractile phenotype of smooth muscle cells, as evidenced by the elevated expression of contractile protein markers such as alpha-SMA, calponin and SM22α. The mechanical properties and the ECM secretion were also increased on applying the mechanical stimulation. Hence, the results showed the promising potential of the GeVAc scaffolds in the regeneration of the medial equivalent tissue-engineered vascular construct.

Retrieval of rat aortic smooth muscle cells as intact cell sheet for regenerative medicine: a cost effective approach using photo polymerization.

Cell-based therapeutics are promising routes for the regeneration of damaged cells and organs. The recovery of cells cultured in vitro for such applications requires the use of proteolytic enzymes which deteriorate its property by disruption of cell-cell and cell-matrix interactions. Intact cell sheets can be retrieved with the use of thermo responsive polymer grafted on to the culture plates. Our study presents the use of photo-polymerization as a simple and inexpensive way to create thermo-responsive culture surfaces for the detachment of intact cell sheet. Poly (N-isopropyl acrylamide) (PNIPAAm) was synthesized by photo-polymerization and characterized by NMR spectroscopy, differential scanning calorimetry and gel permeation chromatography. Thermo-responsive culture dishes were prepared by the coating method and characterized for its thermo-responsive efficacy using FTIR spectroscopy and water contact angle measurements. Atomic force microscopy depicted the thin coating achieved with this method is similar to the conventional grafting method. Suitability for cell culture and cell sheet retrieval was assessed by culturing rat aortic smooth muscle cells in the PNIPAAm coated tissue culture plates. The cells remained viable as evident from the live dead assay and the cell sheet was detached by low temperature treatment. The results demonstrate a versatile method for creating thermo responsive culture surfaces while eliminating the use of expensive radiation sources for the conventional grafting method.

(Citric acid-co-polycaprolactone triol) polyester: a biodegradable elastomer for soft tissue engineering.

Tissue engineering holds enormous challenges for materials science, wherein the ideal scaffold to be used is expected to be biocompatible, biodegradable and possess mechanical and physical properties that are suitable for target application. In this context, we have prepared degradable polyesters in different ratios by a simple polycondensation technique with citric acid and polycaprolactone triol. Differential scanning calorimetry indicated that the materials were amorphous based the absence of a crystalline melting peak and the presence of a glass transition temperature below 37°C. These polyesters were found to be hydrophilic and could be tailor-made into tubes and films. Porosity could also be introduced by addition of porogens. All the materials were non-cytotoxic in an in vitro cytotoxicity assay and may degrade via hydrolysis to non-toxic degradation products. These polyesters have potential implications in the field of soft tissue engineering on account of their similarity of properties.

A biodegradable and biocompatible PVA-citric acid polyester with potential applications as matrix for vascular tissue engineering.

Unique elastomeric and biocompatible scaffolds were produced by the polyesterification of poly(vinyl alcohol) (PVA) and citric acid via a simple polycondensation reaction. The physicochemical characterization of the materials was done by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), mechanical and surface property analyses. The materials are hydrophilic and have viscoelastic nature. Biodegradable, non-cytotoxic materials that can be tailored into 3D scaffolds could be prepared in an inexpensive manner. This polyester has potential implications in vascular tissue engineering application as a biodegradable elastomeric scaffold.