Role of the ZnO electron transport layer in PbS colloidal quantum dot solar cell yield.

The development of lead sulfide (PbS) colloidal quantum dot (CQD) solar cells has led to significant power conversion efficiency (PCE) improvements in recent years, with record efficiencies now over 15%. Many of the recent advances in improving PCE have focused on improving the interface between the PbS CQD active layer and the zinc oxide (ZnO) electron transport layer (ETL). Proper optimization of the ZnO ETL also increases yield, or the percentage of functioning devices per fabrication run. Simultaneous improvements in both PCE and yield will be critical as the field approaches commercialization. This review highlights recent advances in the synthesis of ZnO ETLs and discusses the impact and critical role of ZnO synthesis conditions on the PCE and yield of PbS CQD solar cells.

Tuning Optical Properties of Plasmonic Aerosols through Ligand-Solvent Interactions.

Plasmonic nanoparticles are highly tunable light-harvesting materials with a wide array of applications in photonics and catalysis. More recently, there has been interest in using aerosolized plasmonic nanoparticles for cloud formation, airborne photocatalysts, and molecular sensors, all of which take advantage of the large scattering cross sections and the ability of these particles to support intense local field enhancement ("hot spots"). While extensive research has investigated properties of plasmonic particles in the solution phase, surfaces, and films, aerosolized plasmonics are relatively unexplored. Here, we demonstrate how the capping ligand, suspension solvent, and atomization conditions used for aerosol generation control the steady-state optical properties of aerosolized Silica@Au plasmonic nanoshells. Our experimental results, supported with spectral simulations, illustrate that ligand coverage and atomization conditions control the degree of solvent retention and thus the spectral characteristics and potential access to surfaces for catalysis in the aerosol phase, opening a new regime for tunable applications of plasmonic metamaterials.

Intensity-Modulated Photocurrent Spectroscopy Measurements of High-Efficiency Perovskite Solar Cells.

Frequency domain characterization has long served as an important method for the examination of diverse kinetic processes that occur in solar cells. In this study, we investigated the dynamic response of high-efficiency perovskite solar cells utilizing ultra-low-intensity-modulated photocurrent spectroscopy. Distinctive intensity-modulated photocurrent spectroscopy (IMPS) attributes were detected only as a result of this low-intensity modulation, and their evolution under light and voltage bias was investigated in detail. We generally observed only two arcs in the Q-plane plots and attributed the smaller, low-frequency arc to trap-dominated charge transport in the device. Light and voltage bias-dependent measurements confirm this attribution. An equivalent circuit model was used to better understand the features and trends of these measurements and to validate our physical interpretation of the results. Additionally, we tracked the IMPS response of one of the cells over time and showed that slow degradation impacts the size and attributes of the low-frequency arc. Finally, we found that changes in the IMPS response correlate closely with the current versus voltage characteristics of the devices.

Optical absorption spectra and corresponding in vivo photoacoustic visualization of exposed peripheral nerves.

Significance: Multispectral photoacoustic imaging has the potential to identify lipid-rich, myelinated nerve tissue in an interventional or surgical setting (e.g., to guide intraoperative decisions when exposing a nerve during reconstructive surgery by limiting operations to nerves needing repair, with no impact to healthy or regenerating nerves). Lipids have two optical absorption peaks within the NIR-II and NIR-III windows (i.e., 1000 to 1350 nm and 1550 to 1870 nm wavelength ranges, respectively) which can be exploited to obtain photoacoustic images. However, nerve visualization within the NIR-III window is more desirable due to higher lipid absorption peaks and a corresponding valley in the optical absorption of water. Aim: We present the first known optical absorption characterizations, photoacoustic spectral demonstrations, and histological validations to support in vivo photoacoustic nerve imaging in the NIR-III window. Approach: Four in vivo swine peripheral nerves were excised, and the optical absorption spectra of these fresh ex vivo nerves were characterized at wavelengths spanning 800 to 1880 nm, to provide the first known nerve optical absorbance spectra and to enable photoacoustic amplitude spectra characterization with the most optimal wavelength range. Prior to excision, the latter two of the four nerves were surrounded by aqueous, lipid-free, agarose blocks (i.e., 3% w/v agarose) to enhance acoustic coupling during in vivo multispectral photoacoustic imaging using the optimal NIR-III wavelengths (i.e., 1630 to 1850 nm) identified in the ex vivo studies. Results: There was a verified characteristic lipid absorption peak at 1725 nm for each ex vivo nerve. Results additionally suggest that the 1630 to 1850 nm wavelength range can successfully visualize and differentiate lipid-rich nerves from surrounding water-containing and lipid-deficient tissues and materials. Conclusions: Photoacoustic imaging using the optimal wavelengths identified and demonstrated for nerves holds promise for detection of myelination in exposed and isolated nerve tissue during a nerve repair surgery, with possible future implications for other surgeries and other optics-based technologies.

Blended Conjugated Host and Unconjugated Dopant Polymers Towards N-type All-Polymer Conductors and High-ZT Thermoelectrics.

N-Type thermoelectrics typically consist of small molecule dopant+polymer host. Only a few polymer dopant+polymer host systems have been reported, and these have lower thermoelectric parameters. N-type polymers with high crystallinity and order are generally used for high-conductivity ( σ ${\sigma }$ ) organic conductors. Few n-type polymers with only short-range lamellar stacking for high-conductivity materials have been reported. Here, we describe an n-type short-range lamellar-stacked all-polymer thermoelectric system with highest σ ${\sigma }$ of 78 S-1 , power factor (PF) of 163 µW m-1 K-2 , and maximum Figure of merit (ZT) of 0.53 at room temperature with a dopant/host ratio of 75 wt%. The minor effect of polymer dopant on the molecular arrangement of conjugated polymer PDPIN at high ratios, high doping capability, high Seebeck coefficient (S) absolute values relative to σ ${\sigma }$ , and atypical decreased thermal conductivity ( κ ${\kappa }$ ) with increased doping ratio contribute to the promising performance.

A New Polystyrene-Poly(vinylpyridinium) Ionic Copolymer Dopant for n-Type All-Polymer Thermoelectrics with High and Stable Conductivity Relative to the Seebeck Coefficient giving High Power Factor.

A novel n-type copolymer dopant polystyrene-poly(4-vinyl-N-hexylpyridinium fluoride) (PSpF) with fluoride anions is designed and synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. This is thought to be the first polymeric fluoride dopant. Electrical conductivity of 4.2 S cm-1 and high power factor of 67 µW m-1 K-2 are achieved for PSpF-doped polymer films, with a corresponding decrease in thermal conductivity as the PSpF concentration is increased, giving the highest ZT of 0.1. An especially high electrical conductivity of 58 S cm-1 at 88 °C and outstanding thermal stability are recorded. Further, organic transistors of PSpF-doped thin films exhibit high electron mobility and Hall mobility of 0.86 and 1.70 cm2 V-1 s-1 , respectively. The results suggest that polystyrene-poly(vinylpyridinium) salt copolymers with fluoride anions are promising for high-performance n-type all-polymer thermoelectrics. This work provides a new way to realize organic thermoelectrics with high conductivity relative to the Seebeck coefficient, high power factor, thermal stability, and broad processing window.

3,4,5-Trimethoxy Substitution on an N-DMBI Dopant with New N-Type Polymers: Polymer-Dopant Matching for Improved Conductivity-Seebeck Coefficient Relationship.

Achieving high electrical conductivity and thermoelectric power factor simultaneously for n-type organic thermoelectrics is still challenging. By constructing two new acceptor-acceptor n-type conjugated polymers with different backbones and introducing the 3,4,5-trimethoxyphenyl group to form the new n-type dopant 1,3-dimethyl-2-(3,4,5-trimethoxyphenyl)-2,3-dihydro-1H-benzo[d]imidazole (TP-DMBI), high electrical conductivity of 11 S cm-1 and power factor of 32 µW m-1 K-2 are achieved. Calculations using Density Functional Theory show that TP-DMBI presents a higher singly occupied molecular orbital (SOMO) energy level of -1.94 eV than that of the common dopant 4-(1, 3-dimethyl-2, 3-dihydro-1H-benzoimidazol-2-yl) phenyl) dimethylamine (N-DMBI) (-2.36 eV), which can result in a larger offset between the SOMO of dopant and lowest unoccupied molecular orbital (LUMO) of n-type polymers, though that effect may not be dominant in the present work. The doped polymer films exhibit higher Seebeck coefficient and power factor than films using N-DMBI at the same doping levels or similar electrical conductivity levels. Moreover, TP-DMBI doped polymer films offer much higher electron mobility of up to 0.53 cm2 V-1 s-1 than films with N-DMBI doping, demonstrating the potential of TP-DMBI, and 3,4,5-trialkoxy DMBIs more broadly, for high performance n-type organic thermoelectrics.

Local Defects in Colloidal Quantum Dot Thin Films Measured via Spatially Resolved Multi-Modal Optoelectronic Spectroscopy.

The morphology, chemical composition, and electronic uniformity of thin-film solution-processed optoelectronics are believed to greatly affect device performance. Although scanning probe microscopies can address variations on the micrometer scale, the field of view is still limited to well under the typical device area, as well as the size of extrinsic defects introduced during fabrication. Herein, a micrometer-resolution 2D characterization method with millimeter-scale field of view is demonstrated, which simultaneously collects photoluminescence spectra, photocurrent transients, and photovoltage transients. This high-resolution morphology mapping is used to quantify the distribution and strength of the local optoelectronic property variations in colloidal quantum dot solar cells due to film defects, physical damage, and contaminants across nearly the entire test device area, and the extent to which these variations account for overall performance losses. It is found that macroscopic defects have effects that are confined to their localized areas, rarely prove fatal for device performance, and are largely not responsible for device shunting. Moreover, quantitative analysis based on statistical partitioning methods of such data is used to show how defect identification can be automated while identifying variations in underlying properties such as mobilities and recombination strengths and the mechanisms by which they govern device behavior.

Photonic band engineering in absorbing media for spectrally selective optoelectronic films.

Spectrally selective materials are of great interest for optoelectronic devices in which wavelength-selectivity of the photoactive material is necessary for applications such as multi-junction solar cells, narrow-band photodetectors, transparent photovoltaics, and tailored emission sources. Achieving controlled transparency or opacity within multiple wavelength bands in the absorption, reflection, and transmission spectra are difficult to achieve in traditional semiconductors that typically absorb at all energies above their electronic band gap and is generally realized by the use of external bandpass filters. Here, we propose an alternate method for achieving spectral selectivity in optoelectronic thin films: the use of photonic band engineering within the absorbing region of a semiconductor in which resonant photonic bands are strongly coupled to the external reflectivity and transmission spectra. As a first step, we use optical simulations to systematically study the effect of material absorption on the properties of the photonic bands in a photonic crystal slab structure. We find that adding a weak loss to the materials model does not appreciably change the frequencies of the photonic bands but does reduce the quality factor of the associated photonic modes. Critically, the radiating photonic bands induce strong Fano resonance features in the transmission and reflection spectra, even in the presence of material absorption, due to coupling between the bands and external electromagnetic plane waves. These resonances can be tuned by adjusting the photonic crystal structural properties to induce spectral selectivity in the absorbing region of semiconductors. Lastly, we demonstrate this tuning method experimentally by fabricating a proof-of-principle photonic structure consisting of a self-assembled polystyrene bead monolayer infiltrated with PbS CQDs that displays both near-infrared absorption enhancement and visible transparency enhancement over a homogeneous control film, qualitatively matching predictions and showing promise for optoelectronic applications.

Impact of Yeast Pigmentation on Heat Capture and Latitudinal Distribution.

Pigmentation is a fundamental characteristic of living organisms that is used to absorb radiation energy and to regulate temperature. Since darker pigments absorb more radiation than lighter ones, they stream more heat, which can provide an adaptive advantage at higher latitudes and a disadvantage near the Tropics, because of the risk of overheating. This intuitive process of color-mediated thermoregulation, also known as the theory of thermal melanism (TTM), has been only tested in ectothermic animal models [1-8]. Here, we report an association between yeast pigmentation and their latitude of isolation, with dark-pigmented isolates being more frequent away from the Tropics. To measure the impact of microbial pigmentation in energy capture from radiation, we generated 20 pigmented variants of Cryptococcus neoformans and Candida spp. Infrared thermography revealed that dark-pigmented yeasts heated up faster and reached higher temperatures (up to 2-fold) than lighter ones following irradiation. Melanin-pigmented C. neoformans exhibited a growth advantage relative to non-melanized yeasts when incubated under the light at 4°C but increased thermal susceptibility at 25°C ambient temperatures. Our results extend the TTM to microbiology and suggest pigmentation as an ancient adaptation mechanism for gaining thermal energy from radiation. The contribution of microbial pigmentation in heat absorption is relevant to microbial ecology and for estimating global temperatures. The color variations available in yeasts provide new opportunities in chromatology to quantify radiative heat transfer and validate biophysical models of heat flow [9] that are not possible with plants or animals.

Origins of Stokes Shift in PbS Nanocrystals.

Stokes shift, an energy difference between the excitonic absorption and emission, is a property of colloidal quantum dots (CQDs) typically ascribed to splitting between dark and bright excitons. In some materials, e.g., PbS, CuInS2, and CdHgTe, a Stokes shift of up to 200 meV is observed, substantially larger than the estimates of dark-bright state splitting or vibronic relaxations. The shift origin remains highly debated because contradictory signatures of both surface and bulk character were reported for the Stokes-shifted electronic state. Here, we show that the energy transfer among CQDs in a polydispersed ensemble in solution suffices to explain the excess Stokes shift. This energy transfer is primarily due to CQD aggregation and can be substantially eliminated by extreme dilution, higher-viscosity solvent, or better-dispersed colloids. Our findings highlight that ensemble polydispersity remains the primary source of the Stokes shift in CQDs in solution, propagating into the Stokes shift in films and the open-circuit voltage deficit in CQD solar cells. Improved synthetic control can bring notable advancements in CQD photovoltaics, and the Stokes shift continues to provide a sensitive and significant metric to monitor ensemble size distribution.

High Conductivity and Electron-Transfer Validation in an n-Type Fluoride-Anion-Doped Polymer for Thermoelectrics in Air.

Air-stable and soluble tetrabutylammonium fluoride (TBAF) is demonstrated as an efficient n-type dopant for the conjugated polymer ClBDPPV. Electron transfer from F- anions to the π-electron-deficient ClBDPPV through anion-π electronic interactions is strongly corroborated by the combined results of electron spin resonance, UV-vis-NIR, and ultraviolet photoelectron spectroscopy. Doping of ClBDPPV with 25 mol% TBAF boosts electrical conductivity to up to 0.62 S cm-1 , among the highest conductivities that have been reported for solution-processed n-type conjugated polymers, with a thermoelectric power factor of 0.63 µW m-1 K-2 in air. Importantly, the Seebeck coefficient agrees with recently published correlations to conductivity. Moreover, the F- -doped ClBDPPV shows significant air stability, maintaining the conductivity of over 0.1 S cm-1 in a thick film after exposure to air for one week, to the best of our knowledge the first report of an air-stable solution-processable n-doped conductive polymer with this level of conductivity. The result shows that using solution-processable small-anion salts such as TBAF as an n-dopant of organic conjugated polymers possessing lower LUMO (lowest unoccupied molecular orbital), less than -4.2 eV) can open new opportunities toward high-performance air-stable solution-processable n-type thermoelectric (TE) conjugated polymers.

Color-tuned and transparent colloidal quantum dot solar cells via optimized multilayer interference.

Colloidal quantum dots (CQDs), are a promising candidate material for realizing colored and semitransparent solar cells, due to their band gap tunability, near infrared responsivity and solution-based processing flexibility. CQD solar cells are typically comprised of several optically thin active and electrode layers that are optimized for their electrical properties; however, their spectral tunability beyond the absorption onset of the CQD layer itself has been relatively unexplored. In this study, we design, optimize and fabricate multicolored and transparent CQD devices by means of thin film interference engineering. We develop an optimization algorithm to produce devices with controlled color characteristics. We quantify the tradeoffs between attainable color or transparency and available photocurrent, calculate the effects of non-ideal interference patterns on apparent device color, and apply our optimization method to tandem solar cell design. Experimentally, we fabricate blue, green, yellow, red and semitransparent devices and achieve photocurrents ranging from 10 to 15.2 mA/cm2 for the colored devices. We demonstrate semitransparent devices with average visible transparencies ranging from 27% to 32%, which match our design simulation results. We discuss how our optimization method provides a general platform for custom-design of optoelectronic devices with arbitrary spectral profiles.

An Antimony Selenide Molecular Ink for Flexible Broadband Photodetectors.

The need for low-cost high-performance broadband photon detection with sensitivity in the near infrared (NIR) has driven interest in new materials that combine high absorption with traditional electronic infrastructure (CMOS) compatibility. Here, we demonstrate a facile, low-cost and scalable, catalyst-free one-step solution-processed approach to grow one-dimensional Sb2Se3 nanostructures directly on flexible substrates for high-performance NIR photodetectors. Structural characterization and compositional analyses reveal high-quality single-crystalline material with orthorhombic crystal structure and a near-stoichiometric Sb/Se atomic ratio. We measure a direct band gap of 1.12 eV, which is consistent with predictions from theoretical simulations, indicating strong NIR potential. The fabricated metal-semiconductor-metal photodetectors exhibit fast response (on the order of milliseconds) and high performance (responsivity ~ 0.27 A/W) as well as excellent mechanical flexibility and durability. The results demonstrate the potential of molecular-ink-based Sb2Se3 nanostructures for flexible electronic and broadband optoelectronic device applications.

Conformal fabrication of colloidal quantum dot solids for optically enhanced photovoltaics.

Colloidal quantum dots (CQD) are an attractive thin-film material for photovoltaic applications due to low material costs, ease of fabrication, and size-tunable band gap. Unfortunately, today they suffer from a compromise between light absorption and photocarrier extraction, a fact that currently prevents the complete harvest of incoming above-band-gap solar photons. We have investigated the use of structured substrates and/or electrodes to increase the effective light path through the active material and found that these designs require highly conformal application of the light-absorbing films to achieve the greatest enhancement. This conformality requirement derives from the need for maximal absorption enhancement combined with shortest-distance charge transport. Here we report on a means of processing highly conformal layer-by-layer deposited CQD absorber films onto microstructured, light-recycling electrodes. Specifically, we engineer surface hydrophilicity to achieve conformal deposition of upper layers atop underlying ones. We show that only with the application of conformal coating can we achieve optimal quantum efficiency and enhanced power conversion efficiency in structured-electrode CQD cells.

High-performing visible-blind photodetectors based on SnO2/CuO nanoheterojunctions.

We report on the significant performance enhancement of SnO2 thin film ultraviolet (UV) photodetectors (PDs) through incorporation of CuO/SnO2p-n nanoscale heterojunctions. The nanoheterojunctions are self-assembled by sputtering Cu clusters that oxidize in ambient to form CuO. We attribute the performance improvements to enhanced UV absorption, demonstrated both experimentally and using optical simulations, and electron transfer facilitated by the nanoheterojunctions. The peak responsivity of the PDs at a bias of 0.2 V improved from 1.9 A/W in a SnO2-only device to 10.3 A/W after CuO deposition. The wavelength-dependent photocurrent-to-dark current ratio was estimated to be ~ 592 for the CuO/SnO2 PD at 290 nm. The morphology, distribution of nanoparticles, and optical properties of the CuO/SnO2 heterostructured thin films are also investigated.

Efficient spray-coated colloidal quantum dot solar cells.

A colloidal quantum dot solar cell is fabricated by spray-coating under ambient conditions. By developing a room-temperature spray-coating technique and implementing a fully automated process with near monolayer control-an approach termed as sprayLD-an electronic defect is eliminated resulting in solar cell performance and statistical distribution superior to prior batch-processed methods along with a hero performance of 8.1%.

Colloidal quantum dot solar cells exploiting hierarchical structuring.

Extremely thin-absorber solar cells offer low materials utilization and simplified manufacture but require improved means to enhance photon absorption in the active layer. Here, we report enhanced-absorption colloidal quantum dot (CQD) solar cells that feature transfer-stamped solution-processed pyramid-shaped electrodes employed in a hierarchically structured device. The pyramids increase, by up to a factor of 2, the external quantum efficiency of the device at absorption-limited wavelengths near the absorber band edge. We show that absorption enhancement can be optimized with increased pyramid angle with an appreciable net improvement in power conversion efficiency, that is, with the gain in current associated with improved absorption and extraction overcoming the smaller fractional decrease in open-circuit voltage associated with increased junction area. We show that the hierarchical combination of micron-scale structured electrodes with nanoscale films provides for an optimized enhancement at absorption-limited wavelengths. We fabricate 54.7° pyramid-patterned electrodes, conformally apply the quantum dot films, and report pyramid CQD solar cells that exhibit a 24% improvement in overall short-circuit current density with champion devices providing a power conversion efficiency of 9.2%.

Engineering colloidal quantum dot solids within and beyond the mobility-invariant regime.

Colloidal quantum dots are attractive materials for efficient, low-cost and facile implementation of solution-processed optoelectronic devices. Despite impressive mobilities (1-30 cm2 V(-1) s(-1)) reported for new classes of quantum dot solids, it is--surprisingly--the much lower-mobility (10(-3)-10(-2) cm2 V(-1) s(-1)) solids that have produced the best photovoltaic performance. Here we show that it is not mobility, but instead the average spacing among recombination centres that governs the diffusion length of charges in today's quantum dot solids. In this regime, colloidal quantum dot films do not benefit from further improvements in charge carrier mobility. We develop a device model that accurately predicts the thickness dependence and diffusion length dependence of devices. Direct diffusion length measurements suggest the solid-state ligand exchange procedure as a potential origin of the detrimental recombination centres. We then present a novel avenue for in-solution passivation with tightly bound chlorothiols that retain passivation from solution to film, achieving an 8.5% power conversion efficiency.