The Selective Detection of Cyantraniliprole Insecticides Using Molecularly Imprinted Polymers Coupled with an Acetylcholinesterase Inhibition-Based Biosensor.

Cyantraniliprole is one of the anthranilic diamide insecticides widely used in the agriculture sector. Due to its low toxicity and relatively fast degradation, there is need for a sensitive determination method for its residues. Nowadays, there is growing interest in the development of enzyme-based biosensors. The major drawback is the non-specific binding of many insecticides to the enzyme. This work employs Molecularly imprinted polymers (MIPs) to increase enzyme specificity and eliminate the organic solvent effect on the enzyme activity. The synthesized Cyan-Molecularly imprinted polymers (Cyan-MIP) possesses high affinity and selectivity toward cyantraniliprole. Acetylcholinesterase assay characteristics including enzyme concentration, substrate concentration, DTNB concentration, and acetonitrile concentration were optimized. Under optimal experimental conditions, the developed MIP-Acetylcholinesterase (MIP-AchE) inhibition-based sensor provides better precision than the AchE inhibition-based sensor with a wide linear range (15-50 ppm), limit of detection (LOD) 4.1 ppm, and limit of quantitation (LOQ) 12.6 ppm. The sensor was successfully applied for cyantraniliprole determination in spiked melon, giving satisfactory recoveries.

Surface Modification of Curcumin Microemulsions by Coupling of KLVFF Peptide: A Prototype for Targeted Bifunctional Microemulsions.

Curcumin is one of the most promising natural therapeutics for use against Alzheimer's disease. The major limitations of curcumin are its low oral bioavailability and difficulty in permeating the blood-brain barrier. Therefore, designing a delivery system of curcumin to overcome its limitations must be employed. KLVFF, a peptide known as an amyloid blocker, was used in this study as a targeting moiety to develop a targeted drug delivery system. A prototype of transnasal KLVFF conjugated microemulsions containing curcumin (KLVFF-Cur-ME) for the nose-to-brain delivery was fabricated. The KLVFF-Cur-ME was developed by a titration method. A conjugation of KLVFF was performed through a carbodiimide reaction, and the conjugation efficiency was confirmed by FTIR and DSC technique. KLVFD-Cur-ME was characterized for the drug content, globule size, zeta potential, and pH. A transparent and homogeneous KLVFF-Cur-ME is achieved with a drug content of 80.25% and a globule size of 76.1 ± 2.5 nm. The pH of KLVFF-Cur-ME is 5.33 ± 0.02, indicating non-irritation to nasal tissues. KLVFD-Cur-ME does not show nasal ciliotoxicity. An ex vivo diffusion study revealed that KLVFF-Cur-ME partitions the porcine nasal mucosa through diffusion, following the Higuchi model. This investigation demonstrates the successful synthesis of a bifunctional KLVFF-Cur-ME as a novel prototype to deliver anti-Aß aggregation via an intranasal administration.

The Synthesis of Molecularly Imprinted Polymers on Microcentrifuge Tube Filters for Solid-Phase Extraction and the HPLC-UV Determination of Andrographolides.

Molecular imprinting-based solid-phase extraction has been in the spotlight to improve recognition selectivity and detection sensitivity of andrographolides. The synthesis of molecularly imprinted polymers on micro centrifuge tube filters for the extraction and the determination of andrographolides were investigated. Molecularly imprinted polymers were synthesized using the photo-polymerization method for the preconcentration of andrographolides (AD) template molecule using 2,2-dimethoxy-2-phenylacetophenone as initiators, the mixture of 1-dodecanol and toluene solvent, 2-hydroxyethyl methacrylate and ethylene glycol dimethacrylate as functional monomers and cross-linked, respectively. The resultant AD molecularly imprinted polymers (AD-MIPs) were characterized using the Fourier-transform infrared spectrum and scanning electron microscopy. The maximum adsorption of AD-MIPs toward the andrographolides was found to be 85%, and could reach binding equilibrium within 60 min. The sample solution was separated by AD-MIP using solid-phase extraction (SPE). Subsequently, the sample solution was analyzed by the high-performance liquid chromatography (HPLC) method. The AD-MIP could be successfully applied to specifically separate and determine the andrographolides from pharmaceutical products and biological fluid samples with relatively high recoveries (102.01-108.61%). The present method is simple, selective, accurate, and provides a promising alternative to traditional SPE sorbents for the extraction and determination of andrographolides in real samples and biological fluid samples.

Ion-pairing liquid chromatographic method determination of ketoconazole and stress degradation in pharmaceutical formulations with fluorescence detection

Ion-pairing liquid chromatographic method was validated for determination of ketoconazole in shampoo and cream samples as per ICH guidelines. The chromatographic conditions were carried out in the isocratic mode using a mixture of methanol and 8 mM sodium dodecyl sulfate (pH 5.5) in a ratio of 45:55 v/v %, as mobile phase. The flow rate was set at 1.0 mL min-1. Chromolith RP-18e (100×4.6 mm) was used as the analytical column with a fluorescence detection at an excitation wavelength of 260 nm and an emission wavelength of 375 nm. The average percentage recovery of shampoo A, shampoo B, shampoo C, cream A and cream B were 99.88, 97.06, 99.58, 96.77 and 97.26, respectively. The limit of detection was 0.12 mg L-1. The drug decomposition under acid degradation, base degradation and oxidative degradation were found to be in the range of 91.63-94.70% indicating that the drug is resistant towards acidic conditions. The drug decomposition under thermal condition and photolysis condition were found to be in the range of 69.05-87.15% and 47.31-66.83% respectively, indicating that the drug decomposition is more sensitive under photolysis conditions. This method is suitable for the quality control of ketoconazole in commercial shampoo and creams.

Synthesis of curcuminoid-imprinted polymers applied to the solid-phase extraction of curcuminoids from turmeric samples.

A molecular imprinting polymer technique was successfully applied to precipitation polymerization by using styrene as a functional monomer, curcuminoids as templates, acetonitrile as a porogenic solvent, benzoyl peroxide as the initiator, and ethylene glycol dimethacrylate as the crosslinker. The effects of interaction on the adsorption capacity of the molecularly imprinted polymer (MIP) and non-imprinted polymer (NIP) were investigated. A comparison of the adsorption capacity for MIP and NIP indicated that the NIP had the lowest adsorption capacity. The curcuminoid-imprinted polymer (Cur-MIP) was synthesized from 0.0237 mmol of styrene, 47.0 g of acetonitrile, 1.0238 mmol of ethylene glycol dimethacrylate, 0.0325 mmol of curcuminoids, and 0.2480 mmol of benzoyl peroxide. A high-performance liquid chromatography method with fluorescence detection was developed and validated for various chromatographic conditions for the determination of the curcuminoids in turmeric samples. The sample solution was separated using the Cur-MIP via solid-phase extraction and analyzed on a Brownlee analytical C18 column (150 mm × 6 mm, 5 µm) using an isocratic elution consisting of acetonitrile and 0.1% trichloroacetic acid (40:60, v/v). The flow rate was maintained at 1.5 mL/min. The fluorescence detector was set to monitor at λex = 426 nm and λem = 539 nm. The quantification limit values were found to be 16.66, 66.66, and 33.33 µg/L for curcumin, demethoxycurcumin, and bisdemethoxycurcumin, respectively. Thus, we concluded that the Cur-MIP and high-performance liquid chromatographic-fluorescence method could be applied to selective extraction and could be used as a rapid tool for the determination of curcuminoids in medicinal herbal extracts.

Synthesis of curcuminoid-imprinted polymers applied to the solid-phase extraction of curcuminoids from turmeric samples / 药物分析学报

A molecular imprinting polymer technique was successfully applied to precipitation polymerization by using styrene as a functional monomer, curcuminoids as templates, acetonitrile as a porogenic solvent, benzoyl peroxide as the initiator, and ethylene glycol dimethacrylate as the crosslinker. The effects of interaction on the adsorption capacity of the molecularly imprinted polymer (MIP) and non-imprinted polymer (NIP) were investigated. A comparison of the adsorption capacity for MIP and NIP indicated that the NIP had the lowest adsorption capacity. The curcuminoid-imprinted polymer (Cur-MIP) was syn-thesized from 0.0237 mmol of styrene, 47.0 g of acetonitrile, 1.0238 mmol of ethylene glycol dimetha-crylate, 0.0325 mmol of curcuminoids, and 0.2480 mmol of benzoyl peroxide. A high-performance liquid chromatography method with fluorescence detection was developed and validated for various chro-matographic conditions for the determination of the curcuminoids in turmeric samples. The sample solution was separated using the Cur-MIP via solid-phase extraction and analyzed on a Brownlee ana-lytical C18 column (150 mm × 6 mm, 5μm) using an isocratic elution consisting of acetonitrile and 0.1%trichloroacetic acid (40:60, v/v). The flow rate was maintained at 1.5 mL/min. The fluorescence detector was set to monitor atλex = 426 nm andλem = 539 nm. The quantification limit values were found to be 16.66, 66.66, and 33.33μg/L for curcumin, demethoxycurcumin, and bisdemethoxycurcumin, respec-tively. Thus, we concluded that the Cur-MIP and high-performance liquid chromatographic-fluorescence method could be applied to selective extraction and could be used as a rapid tool for the determination of curcuminoids in medicinal herbal extracts.

A microflow chemiluminescence system for determination of chloramphenicol in honey with preconcentration using a molecularly imprinted polymer.

A novel chemiluminescence (CL) microfluidic system incorporating a molecularly imprinted polymer (MIP) preconcentration step was used for the determination of chloramphenicol in honey samples. The MIP was prepared by using chloramphenicol as the template, diethylaminoethyl methacrylate (DAM) as the function monomer, ethylene glycol dimethacrylate (EGDMA) as the cross-linking monomer, 2, 2'-dimethoxy-2-phenylacetophenone (DMPA) as the free radical initiator and toluene and dodecanol as the solvent. The MIP was pre-loaded into a 10 mm long, 2 mm wide and 150 microm deep channel in a planar glass microfluidic device. When the sample containing chloramphenicol was introduced into the microfluidic device it was first preconcentrated on the MIP then detected by an enhancement effect on the chemiluminescence reaction of tris(2, 2'-bipyridyl) ruthenium(II) with cerium(IV) sulphate in sulphuric acid. A micro-syringe pump was used to pump the reagents. The CL intensity was linear in relationship to the chloramphenicol concentrations from 1.55x10(-4) to 3.09x10(-3) micromol L(-1) (r(2)=0.9915) and the detection limit (3sigma) and the quantitation limit (10sigma) were found to be 7.46x10(-6) and 2.48x10(-5) micromol L(-1), respectively. This method offered a high selectivity and sensitivity for quantitative analysis of chloramphenicol in the honey samples.

Sequential injection analysis with lab-at-valve (SI-LAV) for the determination of solasodine in Solanum species.

The development of sequential injection analysis with lab-at-valve (LAV) semi-automated system on-line liquid-liquid extraction is demonstrated for spectrophotometric determination of solasodine in various Solanum species fruits. The main proposed is semi-automated extractive determination of solasodine using methyl orange as colorimetric reagent. After optimization of the system, sample, reagent and organic solvent were sequentially aspirated into an extraction coil connected to the center of a selection valve, where extraction took place by flow reversal. The aqueous and organic phases were separated in a lab-at-valve unit attracted to one of the ports of the selection valve. The absorption of ion-pair solasodine-methyl orange complex in the organic phase was measured spectrophotometrically at 420 nm. The method performances, including reproducibility, linearity, sensitivity and accuracy, were also evaluated. The proposed method is simple, reproducible and accurate. It was successfully applied to the determination of solasodine in Solanum aculeatissimum Jacq., Solanum violaceum Ortega., Solanum melongena Linn. and Solanum indicum Linn. fruits in Solanaceae family. Results obtained were in good agreement with those obtained by batch wise spectrophotometric method. It is also suitable and useful for determination of solasodine in other medicinal plants.

High-performance liquid chromatographic determination of arbutin in skin-whitening creams and medicinal plant extracts.

A high-performance liquid chromatographic method was developed for quantitative analysis of arbutin. The arbutin was separated on an ODS Hypersil C(18) column with a mobile phase of water:methanol:0.1 M hydrochloric acid (89:10:1, v/v/v). The level of arbutin was measured by means of UV detection at 222 nm. The optimum conditions for arbutin quantitative analysis were investigated. The calibration curve was found to be linear up to 1,000 microg/ml(-1) of arbutin concentration, and the working calibration curve for arbutin determination over the range 0.5-30.0 microg/ml(-1) of arbutin (r(2)=0.9999) was established. The relative standard deviations for intraday and interday were found to be 0.98% and 1.15%, respectively. A detection limit (3sigma) and quantitation limit (10sigma) of 0.02 microg/ml(-1) and 0.2 microg/ml(-1), respectively, and a mean percentage recovery of the spiked arbutin of 99.88 +/- 1.12% were obtained. The proposed method has been applied to the determination of arbutin in commercial skin-whitening creams (Arbuwhite cream, Super Whitening cream, and Shiseido cream) with average contents of 7.60, 5.30, and 57.90 mg/g(-1), respectively. It was also applied to the determination of arbutin in medicinal plant extracts from Betula alnoides Buch. Ham., Clerodendrum petasites S. Moore, Curculigo latifolia Dryand. Var. latifolia, and Hesperethusa crenulata (Roxb.) Roem, levels of which were found to be 3.50, 1.50, 1.10, and 0.12 microg/g(-1), respectively (no article reported in the literature about arbutin analysis). The proposed HPLC method is rapid, simple, and selective for routine analysis.