ABSTRACT
For the first time, we demonstrated the fabrication of mechanically exfoliated molybdenum disulfide (MoS2) samples deposited onto a D-shaped optical fiber. The MoS2 exfoliated flakes were deposited onto a stacked of 1.2 µm PVA (polyvinyl alcohol) and 300 nm PMMA (polymethyl methacrylate) layers and then transferred directly onto a side polished surface of D-shaped optical fiber with polishing length of 17 mm and no distance from the fiber core. The sample exhibited a high polarization performance as a polarizer with relative polarization extinction ratio of 97.5%. By incorporating the sample as a saturable absorber in the Erbium-doped fiber laser (EDFL), bandwidth of 20.5 nm and pulse duration of 200 fs were generated, which corresponded to the best mode-locking results obtained for all-fiber MoS2 saturable absorber at 1.5 µm wavelength.
ABSTRACT
In this paper we report the pulse evolution of a simultaneously mode-locked Erbium-doped fiber laser at 1556-nm-band and 1533-nm-band. We explain the dual wavelength laser operation by means of net gain cross section variations caused by the population inversion rate dependence on the pump power. At 1556-nm-band, we observed pulse duration of 370 fs with bandwidth of 8.50 nm and, for pump power higher than 150 mW, we observe the rise of a CW and mode-locked laser, sequentially, at 1533-nm-band. We show that both bands are simultaneously mode-locked and operate at different repetition rates.
