Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 20
Filter
Add more filters










Publication year range
1.
Sci Rep ; 14(1): 609, 2024 Jan 05.
Article in English | MEDLINE | ID: mdl-38182733

ABSTRACT

It is noted that the traditional direct filed-oriented control (DFOC) is widely used in the field of electric power generation from wind due to its fast response dynamic, ease of implementation and simplicity, but this strategy is characterized by the presence of large ripples at the level of both active and reactive powers. This work presents a new algorithm for DFOC strategy of an asynchronous generator (AG) in a wind power (WP) system, which is based on the use of a new nonlinear controller called fractional-order synergetic control-fractional-order proportional-integral (FOSC-FOPI) controller, where the proposed technique parameters are calculated using the particle swarm optimization (PSO) strategy. It has been observed that the DFOC-FOSC-FOPI-PSO strategy is robust and works well in case of changing generator parameters. Three tests were performed to study the behavior of the designed technique under different working conditions, where the behavior of the DFOC-FOSC-FOPI-PSO strategy was compared with the behavior of the traditional DFOC technique in terms of power ripple ratio, overshoot, steady-state error, response time, tracking reference, and current quality. The simulation of the designed technique based on the FOSC-FOPI-PSO strategy of the AG-WP system is carried out using Matlab software, where the simulation results showed that the suggested technique is better than the classical technique (with PI controller) in terms of improving response time of active power (33.33%) and reactive power (10%) in second test, reduction of the steady-state error of reactive power (96.95%) and active power (97.14) in first test, minimization of harmonic distortion of current (96.57%) in third test and significant minimization of ripples of active power (99.67%, 44.69%, and 98.95%) and reactive power (99.25%, 53.65%, and 70.50%) in the three tests. The effectiveness of the DFOC-FOSC-FOPI-PSO strategy is very high, so it can be a reliable solution for controlling various generators.

2.
Sci Rep ; 13(1): 13570, 2023 Aug 21.
Article in English | MEDLINE | ID: mdl-37604876

ABSTRACT

This work designs a powerful new nonlinear control technique using synergetic control (SC), proportional-integral (PI) controller, and genetic algorithm (GA) for multi-rotor wind energy (MRWE) conversion systems, whereby an asynchronous generator (AG) is used to achieve optimal energy extraction. The direct power control (DPC) technique is used based on the proposed SC-PI-GA (SPI-GA) technique to control the AG-based MRWE system, where this new nonlinear control technique is used to achieve stable control characteristics under random changes in wind speed and to provide great robustness against modeling uncertainties. Moreover, the pulse width modulation (PWM) technique is used to control the AG inverter due to its simplicity and ease of implementation. In this proposed DPC-SPI-GA technique, we need to measure current and voltage to estimate the active power and the reactive power. Also, inner loops are not used in this proposed DPC-SPI-GA technique as is the case in the field-oriented control (FOC) technique, where the proposed system in this work is characterized by an integrated structure. Three different tests are proposed to study and verify the behavior of the designed DPC-SPI-GA strategy compared to the traditional DPC technique.

3.
Sensors (Basel) ; 23(6)2023 Mar 08.
Article in English | MEDLINE | ID: mdl-36991665

ABSTRACT

In this article, the performance of n-type junctionless (JL) double-gate (DG) MOSFET-based biosensors with and without gate stack (GS) has been studied. Here, the dielectric modulation (DM) method is applied to detect biomolecules in the cavity. The sensitivity of n-type JL-DM-DG-MOSFET and n-type JL-DM-GSDG-MOSFET-based biosensors have also been evaluated. The sensitivity (ΔVth) improved in JL-DM-GSDG MOSFET/JL-DM-DG-MOSFET-based biosensors for neutral/charged biomolecules is 116.66%/66.66% and 1165.78%/978.94%, respectively, compared with the previously reported results. The electrical detection of biomolecules is validated using the ATLAS device simulator. The noise and analog/RF parameters are compared between both biosensors. A lower threshold voltage is observed in the GSDG-MOSFET-based biosensor. The Ion/Ioff ratio is higher for DG-MOSFET-based biosensors. The proposed GSDG-MOSFET-based biosensor demonstrates higher sensitivity than the DG-MOSFET-based biosensor. The GSDG-MOSFET-based biosensor is suitable for low-power, high-speed, and high sensitivity applications.


Subject(s)
Biosensing Techniques , Transistors, Electronic , Semiconductors , Biosensing Techniques/methods , Electricity
4.
Micromachines (Basel) ; 13(2)2022 Jan 27.
Article in English | MEDLINE | ID: mdl-35208325

ABSTRACT

The rheology of different materials at the micro and macro levels is an area of great interest to many researchers, due to its important physical significance. Past experimental studies have proved the efficiency of the utilization of nanoparticles in different mechanisms for the purpose of boosting the heat transportation rate. The purpose of this study is to investigate heat and mass transport in a pseudo-plastic model past over a stretched porous surface in the presence of the Soret and Dufour effects. The involvement of tri-hybrid nanoparticles was incorporated into the pseudo-plastic model to enhance the heat transfer rate, and the transport problem of thermal energy and solute mechanisms was modelled considering the heat generation/absorption and the chemical reaction. Furthermore, traditional Fourier and Fick's laws were engaged in the thermal and solute transportation. The physical model was developed upon Cartesian coordinates, and boundary layer theory was utilized in the simplification of the modelled problem, which appears in the form of coupled partial differential equations systems (PDEs). The modelled PDEs were transformed into corresponding ordinary differential equations systems (ODEs) by engaging the appropriate similarity transformation, and the converted ODEs were solved numerically via a Finite Element Procedure (FEP). The obtained solution was plotted against numerous emerging parameters. In addition, a grid independent survey is presented. We recorded that the temperature of the tri-hybrid nanoparticles was significantly higher than the fluid temperature. Augmenting the values of the Dufour number had a similar comportment on the fluid temperature and concentration. The fluid temperature increased against a higher estimation of the heat generation parameter and the Eckert numbers. The impacts of the buoyancy force parameter and the porosity parameter were quite opposite on the fluid velocity.

5.
PLoS One ; 16(12): e0260845, 2021.
Article in English | MEDLINE | ID: mdl-34941871

ABSTRACT

The system of partial differential equations governing the unsteady hydromagnetic boundary-layer flow along an electrically conducting cone embedded in porous medium in the presence of thermal buoyancy, magnetic field, heat source and sink effects are formulated. These equations are solved numerically by using an implicit Finite-Difference Method. The effects of the various parameters that are source/sink parameter, porous medium parameter, Prandtl number, mixed convection parameter and magnetic Prandtl number on the velocity, temperature profiles, transverse magnetic field are predicted. The effects of heat source and sink parameter on the time-mean value as well as on transient skin friction; heat transfer and current density rate are delineated especially in each plot. The extensive results reveal the existence of periodicity and show that periodicity becomes more distinctive for source and sink in the case of the electrically conducting cone. As the source and sink contrast increases, the periodic convective motion is invigorated to the amplitude and phase angle as reflect in the each plot. The dimensionless forms of the set of partial differential equations is transform into primitive form by using primitive variable formulation and then are solved numerically by using Finite Difference Scheme which has given in literature frequently. Physical interpretations of the overall flow and heat transfer along with current density are highlighted with detail in results and discussion section. The main novelty of the obtained numerical results is that first we retain numerical results for steady part and then used in unsteady part to obtain transient skin friction, rate of heat transfer and current density. The intensity of velocity profile is increased for increasing values of porosity parameter Ω, the temperature and mass concentration intensities are reduced due heat source effects.


Subject(s)
Friction/physiology , Models, Theoretical , Skin/physiopathology , Convection , Electricity , Hot Temperature , Humans , Hydrodynamics , Magnetic Fields , Motion , Porosity
6.
Sci Rep ; 11(1): 20262, 2021 Oct 12.
Article in English | MEDLINE | ID: mdl-34642447

ABSTRACT

The current research investigates the thermal radiations and non-uniform heat flux impacts on magnetohydrodynamic hybrid nanofluid (CuO-Fe2O3/H2O) flow along a stretching cylinder, which is the main aim of this study. The velocity slip conditions have been invoked to investigate the slippage phenomenon on the flow. The impact of induced magnetic field with the assumption of low Reynolds number is imperceptible. Through the use of appropriate non-dimensional parameters and similarity transformations, the ruling PDE's (partial differential equations) are reduced to set of ODE's (ordinary differential equations), which are then numerically solved using Adams-Bashforth Predictor-Corrector method. Velocity and temperature fields with distinct physical parameters are investigated and explored graphically. The main observations about the hybrid nanofluid and non-uniform heat flux are analyzed graphically. A decrease in the velocity of the fluid is noted with addition of Hybrid nanofluid particles while temperature of the fluid increases by adding the CuO-Fe2O3 particles to the base fluid. Also, velocity of the fluid decreases when we incorporate the effects of magnetic field and slip. Raise in curvature parameter γ caused enhancement of velocity and temperature fields at a distance from the cylinder but displays opposite behavior nearby the surface of cylinder. The existence of heat generation and absorption for both mass dependent and time dependent parameters increases the temperature of the fluid.

7.
Sci Rep ; 11(1): 17837, 2021 Sep 08.
Article in English | MEDLINE | ID: mdl-34497311

ABSTRACT

Stretched flows have numerous applications in different industrial, biomedical and engineering processes. Current research is conducted to examine the flow phenomenon of Prandtl fluid model over a moveable surface. The phenomenon of mass and thermal transportation is based on generalized theory of Cattaneo-Christov which considers the involvement of relaxation times. In addition to these, variable characteristics of thermal conductivity and diffusion coefficient are considered as a function of temperature. The physical problem in Cartesian coordinate system is modeled via boundary layer theory which yields a coupled system of partial differential equations. Group scaling transportation is applied to model these PDEs system. The converted equations have been approximated via optimal homotopic scheme. The efficiency and validity of used approach has been shown by computing the error analysis and establishing a comparative study. It is noted that the enhancement in magnetic parameter plays a controlling role for velocity field and it augment the concentration and temperature fields. Furthermore, increase in thermal relaxation parameter and Prandtl number maintains the fluid temperature.

8.
PLoS One ; 16(8): e0256302, 2021.
Article in English | MEDLINE | ID: mdl-34432830

ABSTRACT

This report is prepared to examine the heat transport in stagnation point mixed convective hyperbolic tangent material flow past over a linear heated stretching sheet in the presence of magnetic dipole. Phenomenon of thermal transmission plays a vital role in several industrial manufacturing processes. Heat generation is along with thermal relaxation due to Cattaneo-Christov flux is engaged while modeling the energy equation. In order to improve the thermal performance, inclusion of hybrid nanoparticles is mixed in hyperbolic tangent liquid. The conservation laws are modeled in Cartesian coordinate system and simplified via boundary layer approximation. The modeled partial differential equations (PDEs) system are converted into ordinary differential equations (ODEs) system by engaging the scaling group transformation. The converted system of modeled equations has been tackled via finite element procedure (FEP). The efficiency of used scheme has been presented by establishing the grid independent survey. Moreover, accurateness of results is shown with the help of comparative study. It is worth mentioning that the inclusion of hybrid nanoparticles has significant higher impact on heat conduction as compared with nanoparticle. Moreover, hybrid nanoparticles are more efficient to conduct maximum production of heat energy as compared with the production of heat energy of nanoparticles. Hence, hybrid nanoparticles (MoS2/Ag) are observed more significant to conduct more heat energy rather than nanoparticle (Ag).


Subject(s)
Models, Theoretical , Nanoparticles/chemistry , Physical Phenomena , Algorithms , Elasticity , Finite Element Analysis , Hot Temperature , Thermal Conductivity , Transportation , Viscosity
9.
Micromachines (Basel) ; 12(8)2021 Aug 12.
Article in English | MEDLINE | ID: mdl-34442573

ABSTRACT

This report examines the heat and mass transfer in three-dimensional second grade non-Newtonian fluid in the presence of a variable magnetic field. Heat transfer is presented with the involvement of thermal relaxation time and variable thermal conductivity. The generalized theory for mass flux with variable mass diffusion coefficient is considered in the transport of species. The conservation laws are modeled in simplified form via boundary layer theory which results as a system of coupled non-linear partial differential equations. Group similarity analysis is engaged for the conversion of derived conservation laws in the form of highly non-linear ordinary differential equations. The solution is obtained vial optimal homotopy procedure (OHP). The convergence of the scheme is shown through error analysis. The obtained solution is displayed through graphs and tables for different influential parameters.

10.
Sci Rep ; 11(1): 13576, 2021 06 30.
Article in English | MEDLINE | ID: mdl-34193892

ABSTRACT

This article outlines an analytical analysis of unsteady mixed bioconvection buoyancy-driven nanofluid thermodynamics and gyrotactic microorganisms motion in the stagnation domain of the impulsively rotating sphere with convective boundary conditions. To make the equations physically realistic, zero mass transfer boundary conditions have been used. The Brownian motion and thermophoresis effects are incorporated in the nanofluid model. Magnetic dipole effect has been implemented. A system of partial differential equations is used to represent thermodynamics and gyrotactic microorganisms motion, which is then transformed into dimensionless ordinary differential equations. The solution methodology is involved by homotopy analysis method. The results obtained are based on the effect of dimensionless parameters on the velocity, temperature, nanoparticles concentration and density of the motile microorganisms profiles. The primary velocity increases as the mixed convection and viscoelastic parameters are increased while it decreases as the buoyancy ratio, ferro-hydrodynamic interaction and rotation parameters are increased. The secondary velocity decreases as viscoelastic parameter increases while it increases as the rotation parameter increases. Temperature is reduced as the Prandtl number and thermophoresis parameter are increased. The nanoparticles concentration is increased as the Brownian motion parameter increases. The motile density of gyrotactic microorganisms increases as the bioconvection Rayleigh number, rotation parameter and thermal Biot number are increased.

11.
Sci Rep ; 11(1): 11641, 2021 06 02.
Article in English | MEDLINE | ID: mdl-34078976

ABSTRACT

The behavior of an Oldroyd-B nanoliquid film sprayed on a stretching cylinder is investigated. The system also contains gyrotactic microorganisms with heat and mass transfer flow. Similarity transformations are used to make the governing equations non-dimensional ordinary differential equations and subsequently are solved through an efficient and powerful analytic technique namely homotopy analysis method (HAM). The roles of all dimensionless profiles and spray rate have been investigated. Velocity decreases with the magnetic field strength and Oldroyd-B nanofluid parameter. Temperature is increased with increasing the Brownian motion parameter while it is decreased with the increasing values of Prandtl and Reynolds numbers. Nanoparticle's concentration is enhanced with the higher values of Reynolds number and activation energy parameter. Gyrotactic microorganism density increases with bioconvection Rayleigh number while it decreases with Peclet number. The film size naturally increases with the spray rate in a nonlinear way. A close agreement is achieved by comparing the present results with the published results.

12.
Sci Rep ; 11(1): 11277, 2021 May 28.
Article in English | MEDLINE | ID: mdl-34050201

ABSTRACT

The current study characterizes the effects of Hall current, Arrhenius activation energy and binary chemical reaction on the rotating flow of hybrid nanofluid in two double disks. By the use of suitable similarity transformations, the system of partial differential equations and boundary conditions for hybrid nanofluid are transformed to ordinary differential equations which are solved through optimal homotopy analysis method. The intensified magnetic field and hybrid nanofluid performances are represented in three dimensional model with flow, heat and mass transfer. Radial velocity decreases and tangential velocity increases with the Hall parameter. Temperature rises with high values of rotation parameter while it decreases with the Prandtl number. Nanoparticles concentration enhances with the increments in Arrhenius activation energy parameter and stretching parameter due to lower disk. There exists a close and favorable harmony in the results of present and published work.

13.
Sci Rep ; 11(1): 1692, 2021 Jan 18.
Article in English | MEDLINE | ID: mdl-33462274

ABSTRACT

Analytical analysis of two-dimensional, magnetohydrodynamic, heat and mass transfer flow of hybrid nanofluid incorporating Hall and ion-slip effects and viscous dissipation in the presence of homogeneous-heterogeneous chemical reactions and entropy generation is performed. The governing equations are modified with the help of similarity variables. The reduced resulting nonlinear coupled ordinary differential equations are solved with the help of homotopy analysis method. The effects of all the physical parameters are demonstrated graphically through a detailed analysis. The main outcome of the study is the use of applied strong magnetic field which generates the cross flow of hybrid nanofluid along the z-axis. The numerical comparison to the existing published literature is also provided.

14.
Sci Rep ; 10(1): 19792, 2020 Nov 09.
Article in English | MEDLINE | ID: mdl-33168916

ABSTRACT

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

15.
Sci Rep ; 10(1): 7868, 2020 05 12.
Article in English | MEDLINE | ID: mdl-32398708

ABSTRACT

Nanotechnology research has a huge impact upon biomedicine and at the forefront of this area are micro and nano devices that use active/controlled motion. In this connection, it is focus to investigate steady three dimensional rotating flow with heat and mass transfer incorporating gyrotactic microorganisms. Buongiorno's nanofluid formulation is followed for thermophoresis and Brownian motion, porous space, Arrhenius activation energy and binary chemical reaction with some other effects. An enhanced analytical method is applied to solve the nondimensional equations. The non-dimensional parameters effects on the fields of velocity, temperature, nanoparticles concentration and gyrotactic microorganisms concentration are shown graphically. Velocity decreases while temperature and nanoparticles concentration increase with magnetic field strength. Gyrotatic microorganisms motion becomes slow with rotation parameter. Due to rotation, the present problem can be applied in microbial fuel cells, food processing, microbiology, biotechnology and environmental sciences, electric power generating and turbine systems, computer disk drives, mass spectromentries and jet motors.

16.
Sci Rep ; 10(1): 4448, 2020 03 10.
Article in English | MEDLINE | ID: mdl-32157121

ABSTRACT

Buongiorno's nanofluid model is followed to study the bioconvection in two stretchable rotating disks with entropy generation. Similarity transformations are used to handle the problem equations for non-dimensionality. For the simulation of the modeled equations, Homotopy Analysis Method is applied. The biothermal system is explored for all the embedded parameters whose effects are shown through different graphs. There exists interesting results due to the effects of different parameters on different profiles. Radial velocity decreases with increasing stretching and magnetic field parameters. Temperature increases with Brownian motion and thermophoresis parameters. Nanoparticles concentration decreases on increasing Lewis number and thermophoresis parameter while motile gyrotactic microorganisms profile increases with increasing Lewis and Peclet numbers. Convergence of the solution is found and good agreement is obtained when the results are compared with published work.

17.
Molecules ; 25(4)2020 Feb 14.
Article in English | MEDLINE | ID: mdl-32075150

ABSTRACT

In this research article, we investigated a comprehensive analysis of time-dependent free convection electrically and thermally conducted water-based nanofluid flow containing Copper and Titanium oxide (Cu and TiO 2 ) past a moving porous vertical plate. A uniform transverse magnetic field is imposed perpendicular to the flow direction. Thermal radiation and heat sink terms are included in the energy equation. The governing equations of this flow consist of partial differential equations along with some initial and boundary conditions. The solution method of these flow interpreting equations comprised of two parts. Firstly, principal equations of flow are symmetrically transformed to a set of nonlinear coupled dimensionless partial differential equations using convenient dimensionless parameters. Secondly, the Laplace transformation technique is applied to those non-dimensional equations to get the close form exact solutions. The control of momentum and heat profile with respect to different associated parameters is analyzed thoroughly with the help of graphs. Fluid accelerates with increasing Grashof number (Gr) and porosity parameter (K), while increasing values of heat sink parameter (Q) and Prandtl number (Pr) drop the thermal profile. Moreover, velocity and thermal profile comparison for Cu and TiO 2 -based nanofluids is graphed.


Subject(s)
Convection , Hydrodynamics , Nanostructures/chemistry , Water/chemistry , Hot Temperature , Magnetic Fields , Models, Theoretical , Porosity , Temperature
18.
Sci Rep ; 10(1): 1226, 2020 Jan 27.
Article in English | MEDLINE | ID: mdl-31988289

ABSTRACT

The Arrhenius activation energy and binary chemical reaction are taken into account to consider the magnetohydrodynamic mixed convection second grade nanofluid flow through a porous medium in the presence of thermal radiation, heat absorption/generation, buoyancy effects and entropy generation. The items composing of the governing systems are degenerated to nonlinear ordinary differential equations by adopting the appropriate similarity transformations which are computed through Runge-Kutta-Fehlberg (RKF) numerical technique along with Shooting method. The solution is manifested through graphs which provides a detailed explanations of each profile in terms of involved parameters effects. The compared results maintain outstanding approach to the previous papers.

19.
Comput Methods Programs Biomed ; 186: 105197, 2020 Apr.
Article in English | MEDLINE | ID: mdl-31805484

ABSTRACT

This article characterizes flow and heat transmission of blood that carries the micropolar nanofluid of gold in a permeable channel. The thermal radiations are also present in the channel while its walls are either moving or stationary. The base-fluid is considered as blood while micro polar nanofluid is taken as gold. By using similarity transformations along with dimensionless quantities the modeled equations of the problem are transmuted into a system of non-linear ODEs with a set of appropriate boundary conditions. The semi-analytical method, HAM is then applied to determine the solution of a set of resultant equations. The results obtained by HAM have also compared with numerical solutions. The influence of non-dimensional parameters like fractional parameter suction/injection ß, Reynolds Number Re, Darcys Number Da, micropolar parameter  K, Prandtl number Pr and Radiation parameter Rd etc., which provides physical interpretations of temperature, microrotation n and velocity fields are discussed in detail with the help of graphical representations. Nusselt number is calculated and presented through table. This study determined that the temperature of micropolar nanofluid augmented along with augmentation in the volume fraction. Radiation Rd augmented the heat transfer rate at the upper wall and reduce it at the lower wall. The suction/injection parameter 'ß' reduces the heat transfer rate in case of ß < 0 at the upper wall, where it is augmented at lower wall.


Subject(s)
Gold/chemistry , Hot Temperature , Hydrodynamics , Nanotechnology/methods , Permeability
20.
Entropy (Basel) ; 21(8)2019 Aug 16.
Article in English | MEDLINE | ID: mdl-33267514

ABSTRACT

In this research work, a 3D rotating flow of carbon nanotubes (CNTs) over a porous stretchable sheet for heat and mass transfer is investigated. Kerosene oil is considered as a base liquid and two types of CNTs, (Single & Multi) WCNTs are added as the additives to the base liquid. The present analysis further comprises the combined effect of the Hall, ion-slip, and thermal radiation, along with heat generation/absorption. The appropriate ordinary differential system of equations after applying appropriate transformation is calculated. The resulting nonlinear system of equations (conservation of mass, momentum, temperature) is explained by HAM (Homotopy Analysis Method). Solution of velocities and thermal fields are obtained and discussed graphically. Expression of C f and N u are intended for both type of nanoliquids. The influences of prominent physical factors are plotted for velocities and thermal profiles using Methematica. These graphical results are qualitatively in excellent agreement with the previous published results. Also, single wall nanoparticles are found to have higher temperatures than multi wall CNTs nanoparticles.

SELECTION OF CITATIONS
SEARCH DETAIL
...