Insights into Structural Behaviors of Thiolated and Aminated Reduced Graphene Oxide Supports to Understand Their Effect on MOR Efficiency.

It is essential to develop novel catalysts with high catalytic activity, strong durability, and good stability for further application in methanol fuel cells. In this work, we present for the first time the effect of the chemical functional groups (thiol and amine) with different electron affinity in reduced graphene oxide supports on the morphology and catalytic activity of platinum nanoparticles for the methanol oxidation reaction. Hydroxyl groups on graphene oxide were initially brominated and then transformed to the desired functional groups. The good dispersion of metal nanoparticles over functionalized carbon substrates (particle size less than 5 nm) with good durability, even at a limited functionalization degree (less than 7%) has been demonstrated by morphological and structural studies. The durability of the catalysts was much improved via strong coordination between the metal and nitrogen or sulfur atoms. Impressively, the catalytic activity of platinum nanoparticles on aminated reduced graphene oxide was found to be much better than that on thiolated graphene oxide despite the weaker affinity between amine and noble metals. These findings support further developing new graphene derivatives with the desired functionalization for electronics and energy applications..

Preparation and characterization of cellulose nanocrystals from corncob via ionic liquid [Bmim][HSO4] hydrolysis: effects of major process conditions on dimensions of the product.

In this study, cellulose nanocrystals were prepared via the hydrolysis of corncob (CC) biomass using Brønsted acid ionic liquid 1-butyl-3-methylimidazolium hydrogen sulfate [Bmim][HSO4]. The corncob was subjected to alkaline pretreatment, and was then hydrolysed by [Bmim][HSO4], which acted as both solvent and catalyst. The effects of process conditions, including mass percent of CC (1.0-10.0%), reaction temperature (46-110 °C), and reaction time (1.2-2.8 h) on the size of cellulose nanocrystals (IL-CCCNC) were investigated by response surface methodology-central composite design. The obtained IL-CCCNC was characterized by Fourier transforms infrared spectroscopy, zeta sizer, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and thermogravimetry. The results showed that the dimensions of the nanocellulose products were affected by the mass percent of CC and the reaction temperature, but were not significantly influenced by the reaction time under the studied conditions. The optimal conditions, estimated by the developed model, were a mass percent of 2.49%, reaction temperature of 100 °C, and reaction time of 1.5 h. The process successfully produced IL-CCCNC with a yield of 40.13%, average size of 166 nm, and crystallinity index (CrI) of 62.5%. The morphology, chemical fingerprints, and thermal properties of the obtained IL-CCCNC were comparable to those extracted by alkaline and acid hydrolysis. After the reaction, [Bmim][HSO4] could be recovered with a yield of 88.32%, making it a viable green catalyst for the hydrolysis of CC cellulose. The findings are of direct industrial relevance as optimal processes can be developed to produce nanocellulose crystals with desirable size and physicochemical characteristics.

Mussel - Inspired biosorbent combined with graphene oxide for removal of organic pollutants from aqueous solutions.

In this work, we develop a mussel-inspired biosorbent combined with graphene oxide for removal of organic dyes in water sources. The composite was prepared via self-polymerization of dopamine in weak alkaline solution containing graphene oxide at ambient condition. Morphological and structural studies revealed that polydopamine has gradually grown to cover the surface of graphene oxide flakes, partially reduced these flakes, and somehow form many grains (size around 20 nm) on the flakes instead of making very large aggregates as usual. The mass ratio between two components of the composite was also investigated to find the optimal one which provides enough surface area (20 m2.g-1) and maintain adhesive sites in order to ensure high-efficiency removal of organic molecules. The adsorption kinetics and isotherms of as-prepared adsorbent towards methylene blue were found to fit well with pseudo-first order kinetics model and Langmuir isotherm. The maximum adsorption capacity (qm) and Langmuir constant (kL) were estimated to be 270 mg.g-1 and 0.49 L. mg-1. The as-prepared bio-sorbent is very promising for remediation of water sources contaminated with cationic organic molecules and heavy metal ions.

Molecular Identification and Pathogenicity of Novel Duck-Origin Goose Parvovirus Isolated from Beak Atrophy and Dwarfism Syndrome of Waterfowls in the North of Vietnam.

The aim of this study is to identify and characterize virus isolates (which are named for Bacgiang Agriculture and Forestry University [BAFU]) from diseased Cherry Valley duck and mule duck flocks and investigate the damage caused by a novel parvovirus-related virus (DuPV) to tissues and organs, including the brain, cerebellum, kidney, liver, lung, spleen, and spinal cord. The results of phylogenetic analysis show that DuPV-BAFU evolved from a goose lineage and duck parvoviruses rather than from Muscovy duck parvoviruses. In the genetic lineages, DuPVs were identified from the DuPV samples analyzed, and DuPV-BAFU was found to be closely clustered with two known goose origin parvoviruses (GPVa2006 and GPV1995) and a duck GPVs. Finally, structural modeling revealed that DuPV-BAFU and the closely related viruses GPVa2006 and GPV1995 possessed identical clusters of receptor-interacting amino acid residues in the VP3 protein, a major determinant of viral receptor binding and host specificity. Significantly, these three viruses differed from DuPVs, Muscovy duck parvoviruses, and other goose parvoviruses at these positions. These results also demonstrated that DuPV-BAFU represents a new variant of goose-origin parvovirus that currently circulates in ducklings and causes beak atrophy and dwarfism syndrome, as noted in the previous reports in Europe, Taiwan, and China. This new finding highlights the need for future surveillance of DuPV-BAFU in waterfowl in order to gain a better understanding of both the evolution and the biology of this emerging parvovirus in waterfowl.

Identificación molecular y patogenicidad de un nuevo parvovirus de ganso de origen en pato aislado del síndrome de atrofia del pico y enanismo de las aves acuáticas en el norte de Vietnam. El objetivo de este estudio es identificar y caracterizar aislados de virus detectados en la Universidad de Agricultura y Silvicultura de Bacgiang (BAFU) de parvadas de patos enfermos Cherry Valley e híbridos y también investigar el daño causado por un nuevo virus relacionado con parvovirus del pato (DuPV) en tejidos y órganos, incluidos el cerebro, el cerebelo, los riñones, el hígado, los pulmones, el bazo y la médula espinal. Los resultados del análisis filogenético mostraron que el virus DuPV-BAFU evolucionó a partir de un linaje de parvovirus de patos y gansos en lugar del parvovirus de patos reales. En los linajes genéticos, se identificaron virus DuPV a partir de las muestras de DuPV analizadas, y se encontró que el DuPV-BAFU estaba estrechamente agrupado con dos parvovirus conocidos de origen de ganso (GPVa2006 y GPV1995) y con parvovirus de pato. Finalmente, el modelado estructural reveló que el virus DuPV-BAFU y los virus estrechamente relacionados GPVa2006 y GPV1995 poseían grupos idénticos de residuos de aminoácidos que interactúan con el receptor en la proteína VP3, que es un determinante importante de la unión al receptor viral y la especificidad del huésped. Significativamente, estos tres virus diferían de los DuPV, los parvovirus del pato real y de otros parvovirus del ganso en estas posiciones. Estos resultados también demostraron que el virus DuPV-BAFU representa una nueva variante del parvovirus de origen ganso que actualmente circula en patitos y causa atrofia del pico y síndrome de enanismo, como se señaló en reportes anteriores en Europa, Taiwán y China. Este nuevo hallazgo destaca la necesidad de una vigilancia futura para el virus DuPV-BAFU en las aves acuáticas para comprender mejor tanto la evolución como la biología de este parvovirus emergente en las aves acuáticas.

Electrochemical preparation of monodisperse Pt nanoparticles on a grafted 4-aminothiophenol supporting layer for improving the MOR reaction.

The methanol oxidation reaction (MOR) has recently gained a lot of attention due to its application in fuel cells and electrochemical sensors. To enhance the MOR, noble metal nanoparticles should be homogeneously dispersed on the electrode surface with the aid of one suitable support. In this work, 4-aminothiophenol (4-ATP) molecules which contain simultaneously amine and thiol groups were electro-grafted onto the electrode surface to provide anchoring sites, limit aggregation and ensure good dispersion of metal nanoparticles. The results showed a high density of platinum nanoparticles (PtNPs) with an average size of 25 nm on the glassy electrode modified with a 4-ATP supporting layer. Consequently, the MOR was improved by 2.1 times with the aid of the grafted 4-ATP layer. The electrochemical sensor based on PtNPs/4-ATP/GCE is able to detect MeOH in a linear range from 1.26 to 21.42 mM with a detection limit of 1.21 mM.

Majonoside-R2 Postconditioning Protects Cardiomyocytes Against Hypoxia/Reoxygenation Injury by Attenuating the Expression of HIF1α and Activating RISK Pathway.

Reoxygenation of hypoxic cardiac myocytes can paradoxically induce myocardial injury and affect the recovery processes. Pharmacological postconditioning is an efficient strategy used in clinical practice that protects cardiomyocytes from hypoxia/reoxygenation (HR) injury. Natural products or foods have been known to possess effective cardioprotective properties. Majonoside-R2 (MR2) is a dominant saponin component of Vietnamese ginseng that has several biological effects. In this study, we evaluated the protective effect of MR2 on HR-stimulated cardiomyocytes and investigated the related molecular mechanisms. H9C2 cardiomyocytes were exposed to HR conditions with or without MR2 supplementation. Samples from experimental groups were used to analyze the expression of apoptosis- and activating reperfusion injury salvage kinase (RISK)-related factors in response to HR injury by using enzyme-linked immunosorbent assay, real-time polymerase chain reaction, and Western blotting. Post-treatment, MR2 enhanced cell viability under HR conditions. We found that MR2 suppressed the expression of hypoxia-inducible factor 1-alpha (HIF1α) and transforming growth factor beta 1 (TGFß1), modulated Akt/GSK3ß/cAMP response element-binding signaling, and regulated gene expression related to apoptosis (B cell lymphoma-extra-large [Bcl-xl], Bcl-2 homologous killer [Bak], Bcl-2 associated X [Bax], and connexin 43 [Cnx43]). Thus, the present findings demonstrate that MR2 protects cardiomyocytes against HR injury by suppressing the expression of HIF1α and activating the RISK pathway.

Liquiritin from Radix Glycyrrhizae Protects Cardiac Mitochondria from Hypoxia/Reoxygenation Damage.

AIMS: The purpose of this study was to evaluate the protective effect of liquiritin (LIQ) from Radix Glycyrrhizae on cardiac mitochondria against hypoxia/reoxygenation (HR) injury. METHODS: H9C2 cells were subject to the HR model. LIQ purified from Radix Glycyrrhizae (purity > 95%) was administrated to reoxygenation period. Cell viability, mitochondrial mass, mitochondrial membrane potential, reactive oxygen species, and mitochondrial Ca2⁺ level were then assessed by using Cell Counting kit-8 and suitable fluorescence probe kits. RESULTS: LIQ administration remarkably reduced the rate of HR damage via increasing H9C2 cell viability level and preserving mitochondria after HR. Particularly, 60 µM of LIQ posthypoxic treatment markedly reduced cell death in HR-subjected H9C2 cell groups (p < 0.05). Interestingly, posthypoxic treatment of LIQ significantly prevented the loss of mitochondrial membrane potential, the decrease in mitochondrial mass, the increase in reactive oxygen species production, and the elevation of mitochondrial Ca2⁺ level in HR-treated H9C2 cells. CONCLUSION: The present study provides for the first time the cardioprotective of LIQ posthypoxic treatment via reducing H9C2 cell death and protecting cardiac mitochondria against HR damage.

Epitope-imprinted polydopamine electrochemical sensor for ovalbumin detection.

A novel, sensitive and selective electrochemical sensor based on epitope-imprinted polydopamine (PDA) was developed for ovalbumin (OVA) detection. Molecularly imprinted polydopamine was synthesized on an AuNP-coated screen-printed carbon electrode (SPCE) via electropolymerization in the presence of OVA IgE-binding epitope as the template. Key process parameters including template concentration, electropolymerization cycle, pH, time required for template removal and rebinding were optimized. Electrochemical detection of OVA was performed by differential pulse voltammetry (DPV) in 5 mM K3Fe(CN)6 and 0.1 M KCl as the supporting electrolyte. Under optimized conditions, the sensor demonstrated excellent sensitivity toward OVA with linear range from 23.25 to 232.50 nM (1 to 10 ppm), limit of detection (LOD) of 10.76 nM (0.46 ppm), and limit of quantification (LOQ) of 35.87 nM (1.54 ppm). The sensor also exhibited good selectivity against other proteins such as human serum albumin (HSA), bovine serum albumin (BSA), and lysozyme (LYZ). OVA in wine samples was detected with RSD of 5.63-10.82%, and recovery percentage of 104.74-105.96%. The developed method can be easily adapted to detect other allergic proteins in the food supply chain.

Electrochemical Sensor Based on Reduced Graphene Oxide/Double-Walled Carbon Nanotubes/Octahedral Fe3O4/Chitosan Composite for Glyphosate Detection.

In this work, reduced graphene oxide/double-walled carbon nanotubes/octahedral-Fe3O4/chitosan composite material modified screen-printed gold electrodes (rGO/DWCNTs/Oct-Fe3O4/Cs/SPAuE) under inhibition of urease enzyme was developed for the determination of glyphosate (GLY). The electrochemical behaviors of GLY on these electrodes were evaluated by square wave voltammetry (SWV). With the electroactive surface area is 1.7 times higher than that of bare SPAuE, the rGO/DWCNTs/Oct-Fe3O4/Cs/SPAuE for detection of GLY shows a low detection limit (LOD) of ~ 0.08 ppb in a large concentration range of 0.1-1000 ppb. Moreover, it is also successfully applied to the determination of GLY in river water samples with recoveries and relative standard deviations (RSDs) from 98.7% to 106.9% and from 0.79% to 0.87%, respectively. The developed composite will probably provide an universal electrochemical sensing platform that is very promising for environmental monitoring.

Majonoside-R2 extracted from Vietnamese ginseng protects H9C2 cells against hypoxia/reoxygenation injury via modulating mitochondrial function and biogenesis.

Vietnamese ginseng has a therapeutic effect on various diseases; however its bioactivity against cardiac hypoxia/reoxygenation (HR) injury remains unclear. In this study, we evaluated the protective roles of total saponin extract (TSE) and majonoside-R2 (MR2) targeting mitochondria in HR-induced rat cardiomyocyte H9C2 cells. The results showed that both TSE and MR2 effectively protected the cells from HR damage. Particularly, 9 µM of MR2 significantly increased the viability of HR-induced cells (p < 0.05). Interestingly, MR2 treatment markedly prevented the loss of mitochondrial membrane potential and cardiolipin content, and an increase in reactive oxygen species production in HR-treated H9C2 cells. Moreover, MR2 treatment altered the mRNA expression of genes involved in mitochondrial biogenesis under HR conditions. The present study documented for the first time the cardioprotective effects of MR2 against HR injury by maintaining mitochondrial function and modulating mitochondrial biogenesis.

Sensors Made of Natural Renewable Materials: Efficiency, Recyclability or Biodegradability-The Green Electronics.

Nowadays, sensor devices are developing fast. It is therefore critical, at a time when the availability and recyclability of materials are, along with acceptability from the consumers, among the most important criteria used by industrials before pushing a device to market, to review the most recent advances related to functional electronic materials, substrates or packaging materials with natural origins and/or presenting good recyclability. This review proposes, in the first section, passive materials used as substrates, supporting matrixes or packaging, whether organic or inorganic, then active materials such as conductors or semiconductors. The last section is dedicated to the review of pertinent sensors and devices integrated in sensors, along with their fabrication methods.

In Situ Charge Transfer at the Ag@ZnO Photoelectrochemical Interface toward the High Photocatalytic Performance of H2 Evolution and RhB Degradation.

Designing an efficient hybrid structure photocatalyst for photocatalytic decomposition and hydrogen (H2) evolution has been considered a great choice to develop renewable technologies for clean energy production and environmental remediation. Enhanced charge transfer (CT) based on the interaction between a noble metal and a semiconductor is a crucial factor influencing the movement of photogenerated electron-hole pairs. Herein, we focus on the recent advances related to plasmon-enhanced noble metals and the semiconductor nature to drive the photocatalytic H2 production and photodegradation of the organic dye rhodamine B (RhB) under UV and visible light irradiation. Specifically, the combination of concerted catalysis and green nanoengineering strategies to design ZnO-based composite photocatalysts and their decoration with metallic Ag have been realized by the radio frequency (RF) sputtering technique at room temperature. This simultaneity enhances the interface coupling between Ag and ZnO and reduces the energy threshold. The creation of charge transfer in the heterojunction and Schottky barrier changes the photoelectronic properties of the as-synthesized Al-doped ZnO (AZO); afterward, these effects promote the migration, transportation, and separation of photoinduced charge carriers and enhance the light-harvesting efficiency. As a result, the as-synthesized AZO-20 hybrid nanostructure exhibits a photocurrent density of 2.5 mA/cm2 vs Ag/AgCl, which is improved by almost 12 times compared with that of bare ZnO (0.2 mA/cm2). The hydrogen evolution rates of AZO-20 were ∼38 and ∼24 µmol/h under UV and visible light exposure, which are almost five- and tenfold higher than those of pristine ZnO, respectively. Additionally, the RhB degradation efficacies of the obtained AZO-20 were greater than almost 97 and 82% under UV and visible light illumination, respectively. The achieved apparent rate constant for the photocatalytic RhB decomposition was 0.014 min-1, indicating that it is 14-fold than that in pristine ZnO (0.001 min-1). Heterostructure AZO photocatalysts possess excellent practical stability in the water-splitting reaction and photocatalytic RhB decomposition, posing as promising candidates in practical works for pollution and energy challenges.

Facile fabrication of highly flexible and floatable Cu2O/rGO on Vietnamese traditional paper toward high-performance solar-light-driven photocatalytic degradation of ciprofloxacin antibiotic.

In this work, we successfully demonstrated the facile fabrication of highly flexible and floatable Cu2O/rGO on Vietnamese traditional paper (VTP) for the solar-light-driven photocatalytic degradation of the antibiotic ciprofloxacin. The catalyst membrane was prepared by the green reduction of both Cu(OH)2 to Cu2O nanoparticles and graphene oxide to reduced graphene oxide. VTP has a fibrous structure with tiny fibers connected like a spider web and multiple layers in the form of a multidimensional array, which functions as a flexible and highly porous supporter to the catalyst. Moreover, the microfibrillated cellulose of VTP acts as micro-capillaries to drag ciprofloxacin (CIP) close to the active sites on the Cu2O/rGO/VTP surface, which improves the adsorption capacity and photocatalytic efficiency of ciprofloxacin. The adsorption process is best described by the pseudo-first-order and Freundlich models. The maximum photodegradation of CIP by the catalyst is more than 80% attained after 1.5 h under solar light irradiation with a fixed CIP concentration of 10 mg L-1. The catalyst membrane exhibited good reusability of up to 5 cycles.

An electrochemical sensor based on copper-based metal-organic framework-reduced graphene oxide composites for determination of 2,4-dichlorophenol in water.

In the present work, we reported the fabrication of a novel electrochemical sensing platform to detect 2,4-dichlorophenol (2,4-DCP) by using a copper benzene-1,3,5-tricarboxylate-graphene oxide (Cu-BTC/GO) composite. The sensor was prepared by drop-casting Cu-BTC/GO suspension onto the electrode surface followed by electrochemical reduction, leading to the generation of an electrochemically reduced graphene oxide network (ErGO). By combining the large specific area of the Cu-BTC matrix with the electrical percolation from the graphene network, the number of accessible reaction sites was strongly increased, which consequently improved the detection performance. The electrochemical characteristics of the composite were revealed by cyclic voltammetry and electrochemical impedance spectroscopy. For the detection of 2,4-DCP, differential pulse voltammetry was used to emphasize the faradaic reaction related to the oxidation of the analyte. The results displayed a low detection limit (83 × 10-9 M) and a linear range from 1.5 × 10-6 M to 24 × 10-6 M alongside high reproducibility (RSD = 2.5% for eight independent sensors) and good stability. Importantly, the prepared sensors were sufficiently selective against interference from other pollutants in the same electrochemical window. Notably, the presented sensors have already proven their ability in detecting 2,4-DCP in real field samples with high accuracy (recovery range = 97.17-104.15%).

An Electrochemical Sensor Based on Gold Nanodendrite/Surfactant Modified Electrode for Bisphenol A Detection.

In the present work, we reported the simple way to fabricate an electrochemical sensing platform to detect Bisphenol A (BPA) using galvanostatic deposition of Au on a glassy carbon electrode covered by cetyltrimethylammonium bromide (CTAB). This material (CTAB) enhances the sensitivity of electrochemical sensors with respect to the detection of BPA. The electrochemical response of the modified GCE to BPA was investigated by cyclic voltammetry and differential pulse voltammetry. The results displayed a low detection limit (22 nm) and a linear range from 0.025 to 10 µm along side with high reproducibility (RSD = 4.9% for seven independent sensors). Importantly, the prepared sensors were selective enough against interferences with other pollutants in the same electrochemical window. Notably, the presented sensors have already proven their ability in detecting BPA in real plastic water drinking bottle samples with high accuracy (recovery range = 96.60%-102.82%) and it is in good agreement with fluorescence measurements.

Improved Corrosion Resistance of Steel in Ethanol Fuel Blend by Titania Nanoparticles and Aganonerion polymorphum Leaf Extract.

A porous and low-density protective film on a steel surface in the corrosive environment can undergo deterioration even in the presence of organic inhibitors due to infiltration of aggressive ions into the pinholes and/or pores. This phenomenon is related to the localized corrosion that takes place even in the presence of an optimal concentration of organic corrosion inhibitors in the given medium. To overcome this issue, we have designed an organic protective film on a steel surface with the help of titania nanoparticles (TNPs) combined with an organic corrosion inhibitor derived from Aganonerion polymorphum leaf extract (APLE), all to be studied in a simulated ethanol fuel blend (SEFB). The TNPs with varied diameters and concentrations have been studied for examining their effect on the inhibition capacity of 1000 ppm APLE on the steel surface in SEFB medium using electrochemical and surface analysis techniques. Enhanced corrosion inhibition of the surficial film was observed in the presence of both the APLE inhibitor and small amounts of TNPs. A direct agreement was observed between the experimental and molecular dynamics theoretical investigations showcasing high binding energy between inhibitor molecules and steel substrates, resulting in a much higher adhesion of the protective film, good thermal stability of the adsorbent film, and electron abundance for the supply of steel substrate of inhibitor species.

Tetrahydrobiopterin enhances mitochondrial biogenesis and cardiac contractility via stimulation of PGC1α signaling.

Tetrahydrobiopterin (BH4) shows therapeutic potential as an endogenous target in cardiovascular diseases. Although it is involved in cardiovascular metabolism and mitochondrial biology, its mechanisms of action are unclear. We investigated how BH4 regulates cardiovascular metabolism using an unbiased multiple proteomics approach with a sepiapterin reductase knock-out (Spr-/-) mouse as a model of BH4 deficiency. Spr-/- mice exhibited a shortened life span, cardiac contractile dysfunction, and morphological changes. Multiple proteomics and systems-based data-integrative analyses showed that BH4 deficiency altered cardiac mitochondrial oxidative phosphorylation. Along with decreased transcription of major mitochondrial biogenesis regulatory genes, including Ppargc1a, Ppara, Esrra, and Tfam, Spr-/- mice exhibited lower mitochondrial mass and severe oxidative phosphorylation defects. Exogenous BH4 supplementation, but not nitric oxide supplementation or inhibition, rescued these cardiac and mitochondrial defects. BH4 supplementation also recovered mRNA and protein levels of PGC1α and its target proteins involved in mitochondrial biogenesis (mtTFA and ERRα), antioxidation (Prx3 and SOD2), and fatty acid utilization (CD36 and CPTI-M) in Spr-/- hearts. These results indicate that BH4-activated transcription of PGC1α regulates cardiac energy metabolism independently of nitric oxide and suggests that BH4 has therapeutic potential for cardiovascular diseases involving mitochondrial dysfunction.

Reduced graphene oxide-polyaniline film as enhanced sensing interface for the detection of loop-mediated-isothermal-amplification products by open circuit potential measurement.

The development of low cost, portable diagnostic tools for in-field detection of viruses and other pathogenic microorganisms is in great demand but remains challenging. In this study, a novel approach based on reduced graphene oxide-polyaniline (rGO-PANi) film for the in situ detection of loop-mediated-isothermal-amplification (LAMP) products by means of open circuit potential measurement is proposed. The pH-sensitive conducting polymer PANi was electro-deposited onto rGO coated screen printed electrodes and tuned to be at the emeraldine state at which the pH sensitivity was maximized. By combining PANi and rGO, the pH sensitivity of the system was modulated up to about -64 mV per pH unit. This enabled the number of amplified amplicons resulting from the isothermal amplification process to be monitored. The sensor was then examined for monitoring LAMP reactions using Hepatitis B virus (HBV) as a model. This simple, low-cost, reproducible and sensitive interfacing layer is expected to provide a new possibility for designing point-of-care sensors under limited-resource conditions.

Acute and Chronic Exercise in Animal Models.

Numerous animal cardiac exercise models using animal subjects have been established to uncover the cardiovascular physiological mechanism of exercise or to determine the effects of exercise on cardiovascular health and disease. In most cases, animal-based cardiovascular exercise modalities include treadmill running, swimming, and voluntary wheel running with a series of intensities, times, and durations. Those used animals include small rodents (e.g., mice and rats) and large animals (e.g., rabbits, dogs, goats, sheep, pigs, and horses). Depending on the research goal, each experimental protocol should also describe whether its respective exercise treatment can produce the anticipated acute or chronic cardiovascular adaptive response. In this chapter, we will briefly describe the most common kinds of animal models of acute and chronic cardiovascular exercises that are currently being conducted and are likely to be chosen in the near future. Strengths and weakness of animal-based cardiac exercise modalities are also discussed.