Gravity unloading of a very large spaceborne monolithic SiC mirror.

We formulated a gravity unloading strategy for a monolithic silicon carbide (SiC) mirror with a Φ3m aperture in space. Employing the finite element analysis (FEA) technique, a rapid solution analytical approach for determining optimal support forces during gravity unloading is introduced. This method demonstrates enhanced efficiency and accuracy compared to conventional approaches. A quantitative evaluation methodology for the gravity release error, grounded in the minimum-energy mode, is delineated. The adverse impacts could be expeditiously computed by assessing the maximum deflection of minimum-energy modes generated by various errors. The analytical findings revealed that compliance with the stipulated gravity release error criterion of less than 6 nm (root-mean-square) necessitated the gravity unloading force error to fall within the range of ±0.1N. Additionally, the gravity unloading support position error was required to be within Φ0.5m m, and the measurement error pertaining to the rib thickness of the actual mirror blank had to be within ±0.02m m.

Performance evaluation of the UV activated chlorite process on trimethoprim: Degradation efficiency, energy consumption and disinfection by-products formation.

As the primary inorganic by-product species of ClO2, chlorite is believed to have negative toxicological effects on human health and therefrom greatly limits the wide application of ClO2 in water treatment. The synergistic trimethoprim (TMP) removal concerning degradation efficiency, energy consumption and disinfection by-products (DBPs) formation in the UV activated chlorite process accompanied by the simultaneously elimination of chlorite was comprehensively evaluated. UV/chlorite integrated process removed TMP far more rapidly than UV (1.52%) or chlorite (3.20%) alone due to the endogenous radicals (Cl•, ClO• and •OH), the contributing proportions of which were 31.96%, 19.20% and 44.12%. The second-order rate constants of TMP reaction with Cl•, ClO• and •OH were determined to be 1.75 × 1010, 1.30 × 109 and 8.66 × 109 M-1 s-1. The effects of main water parameters including chlorite dosage, UV intensity, pH as well as water matrixes (nature organic matter, Cl- and HCO3-) were examined. kobs obeyed the order as UV/Cl2>UV/H2O2≈UV/chlorite>UV, and the cost ranking via electrical energy per order (EE/O, kWh m-3 order-1) parameter was UV/chlorite (3.7034) > UV/H2O2 (1.1625) >UV/Cl2 (0.1631). The operational scenarios can be optimized to achieve the maximum removal efficiencies and the minimum energy costs. The destruction mechanisms of TMP were proposed by LC-ESI-MS analysis. The overall weighted toxicity in subsequent disinfection was assessed as UV/Cl2>UV/chlorite > UV, the values of which in post-chlorination were 6.2947, 2.5806 and 1.6267, respectively. Owing to the vital roles of reactive chlorine species (RCS), UV/chlorite displayed far higher TMP degradation efficiency than UV, and concurrently presented much less toxicity than UV/Cl2. In an effort to determine the viability of the promising combination technology, this study was devoted to reduce and reuse chlorite and synchronously realize the contaminants degradation efficiently.

Toxicity effects of disinfection byproduct chloroacetic acid to Microcystis aeruginosa: Cytotoxicity and mechanisms.

Chlorine-based disinfectants are widely used for disinfection in wastewater treatment. The mechanism of the effects of chlorinated disinfection by-products on cyanobacteria was unclear. Herein, the physiological effects of chloroacetic acid (CAA) on Microcystis aeruginosa (M. aeruginosa), including acute toxicity, oxidative stress, apoptosis, production of microcystin-LR (MC-LR), and the microcystin transportation-related gene mcyH transcript abundance have been investigated. CAA exposure resulted in a significant change in the cell ultrastructure, including thylakoid damage, disappearance of nucleoid, production of gas vacuoles, increase in starch granule, accumulation of lipid droplets, and disruption of cytoplasm membranes. Meanwhile, the apoptosis rate of M. aeruginosa increased with CAA concentration. The production of MC-LR was affected by CAA, and the transcript abundance of mcyH decreased. Our results suggested that CAA poses acute toxicity to M. aeruginosa, and it could cause oxidative damage, stimulate MC-LR production, and damage cell ultrastructure. This study may provide information about the minimum concentration of CAA in the water environment, which is safe for aquatic organisms, especially during the global coronavirus disease 2019 pandemic period.

Continuous and discontinuous multi-generational disturbances of tetrabromobisphenol A on longevity in Caenorhabditis elegans.

Tetrabromobisphenol A (TBBPA) is one of the most prevalently used brominated flame retardants. Due to its persistence, it is predominantly found in environmental matrices and has the potential to generate multi-generational toxicity. However, knowledge of its adaptive response or long-term residual effect in multi-generations, and molecular mechanisms remain understudied. In the current study, the model animal nematode Caenorhabditis elegans (C. elegans) was exposed to TBBPA at environmentally realistic concentrations (0.1-1000 µg L-1) for four consecutive generations (G0 to G3). Degenerative age-related multiple endpoints including lifespan, locomotion behaviors, growth, reproduction, oxidative stress-related biochemical responses, cell apoptosis, and stress related gene expressions were assessed in the continuous exposure generations (G0 and G3) and the discontinuously exposed generations (T3 and T'3). The results showed that changes in degenerative age-related response monitored four generations varied in direction and magnitude depending on the TBBPA concentrations, and the response intensify ranked as G0 > T'3/G3 > T3. TBBPA at 1 µg L-1 dosage was detected as the lowest observed effect concentration in multi-biomarkers. The underlying mechanism of aging phenotypes was that reactive oxygen species accumulation led to cell apoptosis regulated by gene ape-1, and confirmed catalase enzyme and superoxide dismutase activity played a crucial role in the detoxification process of TBBPA at the molecular level. This study provided insights into the underlying mechanism of TBBPA-interfered longevity and its environmental multi-generational potential risks.

Enantioselective effects of chiral fragrance carvone (L- and D-carvone) on the physiology, oxidative damage, synthesis, and release of microcystin-LR in Microcystis aeruginosa.

Carvone is a widely used chiral fragrance with two isomers (L-carvone and D-carvone). D-carvone smells like a caraway, whereas L-carvone smells like mint. Carvone imposes a potential burden on the aquatic ecosystem. However, the enantioselective toxic effect of carvone enantiomers on cyanobacteria remains unknown. This study aims to investigate the effects of L- and D-carvone on the physiological processes and related gene transcription (phoU, rbcL, and mcyH) in M. aeruginosa. Results showed that in the presence of L- and D-carvone, the oxidative damage and inhibitory effects on growth occurred in a concentration-dependent manner. The contents of chlorophyll a and protein and the rbcL transcription level were inhibited in M. aeruginosa. In addition, intracellular adenosine triphosphate (ATP) was heavily depleted because of various biological processes, including growth, oxidation reactions, and gene regulation. Meanwhile, L- and D-carvone stimulated the production and release of MC-LR and upregulated the expression level of the MC-LR-related gene mcyH. Intracellular MC-LR likely leaked to the water body under L-carvone exposure, posing a potential threat to the water environment. This study indicated that L- and D-carvone can regulate the physiological and metabolic activity of M. aeruginosa and show enantioselective toxic effects. The findings will also provide important insights into the influence of chiral fragrance on cyanobacterial blooms. Furthermore, this study will guide the safe application of chiral fragrance as personal care products.

The monthly variation tendency of microcystin-LR levels in the Huangpu River (China) by applications of ELISA and HPLC.

In this study, the contents of microcystin-LR (MC-LR) of Microcystis aeruginosa cultures in the laboratory and natural water samples from the Huangpu River in different seasons were detected through enzyme-linked immunosorbent assay (ELISA) and high-performance liquid chromatography (HPLC), respectively. Excellent correlation between the two methods was obtained (R2 > 0.99). ELISA was a reliable and simple method with high reproducibility (coefficient of variation < 25%) and satisfactory recovery for the monitoring of low levels of MC-LR. MC-LR concentrations in Huangpu River varied with the seasonal variation, which peaked in August with the temperature over 30 °C and then gradually declined with the decreasing temperature after August. The highest MC-LR concentration in the Huangpu River was below the WHO drinking water quality standard (1 µg/L). These results indicated that warm temperature accelerated the MC-LR synthesis and release, and it is necessary to regularly monitor the MC-LR levels, especially during the high algae period in summer. ELISA can be applied to detect the low levels of MC-LR in the field without complex treatment, avoiding the samples from denaturation and degradation during the transportation. Hence, ELISA is a better alternative of HPLC when HPLC is unavailable, especially when rapid testing is required in routine MC-LR analysis.

The fate and transformation of iodine species in UV irradiation and UV-based advanced oxidation processes.

Iodinated disinfection byproducts (I-DBPs) formed in water treatment are of emerging concern due to their high toxicity and the tase-and-odor problems associated with iodinated trihalomethanes (I-THMs). Iodoacetic acid and dichloroiodomethane are currently regulated in Shenzhen, China and the Ministry of Health of the People's Republic of China has also been considering regulating I-DBPs. Iodide (I-), organoiodine compounds (e.g., iodinated X-ray contrast media [ICM]), and iodate (IO3-) are the three common iodine sources in aquatic environment that lead to I-DBP formation. While UV irradiation effectively inactivate a wide range of microorganisms in water, it induces the transformation of these iodine sources, enabling the formation of I-DBPs. This review focuses on the fate and transformation of these iodine sources in UV-based water treatment (i.e., UV irradiation and UV-based advanced oxidation processes [UV-AOPs]) and the formation of I-DBPs in post-disinfection. I- released in UV-based treatments of ICM and can be oxidized in subsequent disinfection to hypoiodous acid (HOI), which reacts with natural organic matter (NOM) to produce I-DBPs. Both UV and UV-AOPs are not able to fully mineralize ICM and completely oxidize the released I- to (except UV/O3). Results reveal that UV and UV-AOPs are adequate for I-DBP degradation but require high UV doses. While the ideal I-DBP mitigation strategy awaits to be developed, understanding their sources and formation pathways aids in informed selections of water treatment processes, empowers water suppliers to meet drinking water standards, and minimizes consumers' exposure to I-DBPs.

Optimization design of an ultralight large-aperture space mirror.

The ultralight space mirror has long been a hot topic in the research field of space telescopes. In this paper, an ultralight mirror is designed by obtaining the structure and parameters of a mirror with an aperture of 2 m through experimental design and multiobjective integrated optimization. Specifically, the materials near the neutral surface were replaced with elliptical holes. The back of the mirror was supported at three points. Finite-element analysis shows that the mirror had a surface figure error of 10.4 nm under 1 g in the x direction (gravity direction), which is sufficiently high to be applied to visible light optical systems. Further, the eigenfrequencies of mirror components were obtained through finite-element analysis: 70 Hz in the x direction, 70 Hz in the y direction, and 90 Hz in the z direction. The results demonstrate the excellent dynamics performance of the designed mirror. Compared with test results, the relative error of eigenfrequencies was within 4%. Hence, our ultralight design outputs reliable optimization results and applies to the development of large-aperture ultralight space mirrors. Finally, the ultralight mirror was prepared from reaction-bonded silicon carbide. The mass and surface density of the prepared mirror were 105 kg and 34kg/m2, respectively. The mirror mass was 50% lighter than that of the mirrors designed by traditional lightweight methods.

Comparison of UV-induced AOPs (UV/Cl2, UV/NH2Cl, UV/ClO2 and UV/H2O2 ) in the degradation of iopamidol: Kinetics, energy requirements and DBPs-related toxicity in sequential disinfection processes.

The UV-induced advanced oxidation processes (AOPs, including UV/Cl2, UV/NH2Cl, UV/ClO2 and UV/H2O2 ) degradation kinetics and energy requirements of iopamidol as well as DBPs-related toxicity in sequential disinfection were compared in this study. The photodegradation of iopamidol in these processes can be well described by pseudo-first-order model and the removal efficiency ranked in descending order of UV/Cl2  > UV/H2O2  > UV/NH2Cl > UV/ClO2  > UV. The synergistic effects could be attributed to diverse radical species generated in each system. Influencing factors of oxidant dosage, UV intensity, solution pH and water matrixes (Cl- , NH4 + and nature organic matter) were evaluated in detail. Higher oxidant dosages and greater UV intensities led to bigger pseudo-first-order rate constants (Kobs) in these processes, but the pH behaviors exhibited quite differently. The presence of Cl- , NH4 + and nature organic matter posed different effects on the degradation rate. The parameter of electrical energy per order (EE/O) was adopted to evaluate the energy requirements of the tested systems and it followed the trend of UV/ClO2  > UV > UV/NH2Cl > UV/H2O2  > UV/Cl2 . Pretreatment of iopamidol by UV/Cl2 and UV/NH2Cl clearly enhanced the production of classical disinfection by-products (DBPs) and iodo-trihalomethanes (I-THMs) during subsequent oxidation while UV/ClO2 and UV/H2O2 exhibited almost elimination effect. From the perspective of weighted water toxicity, the risk ranking was UV/NH2Cl > UV/Cl2 > UV > UV/H2O2 > UV/ClO2 . Among the discussed UV-driven AOPs, UV/Cl2 was proved to be the most cost-effective one for iopamidol removal while UV/ClO2 displayed overwhelming advantages in regulating the water toxicity associated with DBPs, especially I-THMs. The present results could provide some insights into the application of UV-activated AOPs technologies in tradeoffs between cost-effectiveness assessment and DBPs-related toxicity control of the disinfected waters containing iopamidol.

Comparative evaluation of metoprolol degradation by UV/chlorine and UV/H2O2 processes.

The degradation of metoprolol (MTP), a ß-blocker commonly used for cardiovascular diseases, by UV/chlorine and UV/H2O2 processes was comparatively evaluated. MTP direct photolysis at 254 nm could be neglected, but remarkable MTP degradation was observed in both the UV/chlorine and UV/H2O2 systems. Compared with UV/H2O2, UV/chlorine has a more pronounced MTP degradation efficiency. In addition to primary radicals (OH and Cl), secondary radicals (ClO and Cl2-) played a pivotal role in degrading MTP by UV/chlorine process. The relative contributions of hydroxyl radicals (OH) and reactive chlorine species (RCS) in the UV/chlorine system varied at different solution pH values (i.e., the contribution of RCS increased from 57.7% to 75.1% as the pH increased from 6 to 8). The degradation rate rose as the oxidant dosage increased in the UV/chlorine and UV/H2O2 processes. The presence of Cl- slightly affected MTP degradation in both processes, while the existence of HCO3- and HA inhibited MTP degradation to different extents in both processes. In terms of the overall cost of electrical energy, UV/chlorine is more cost efficient than UV/H2O2. The degradation products during the two processes were identified and compared, and the degradation pathways were proposed accordingly. Compared with the direct chlorination of MTP, pre-oxidation with UV/chlorine and UV/H2O2 significantly enhanced the formation of commonly known DBPs. Therefore, when using UV/chlorine and UV/H2O2 in real waters to remove organic pollutants, the possible risk of enhanced DBP formation resulting from the degradation of certain pollutants during post-chlorination should be carefully considered.

Photochemical degradation of iodate by UV/H2O2 process: Kinetics, parameters and enhanced formation of iodo-trihalomethanes during chloramination.

In this paper, it was demonstrated that UV/H2O2 process can not only obviously promote the degradation rate of IO3-, but also greatly enhance iodo-trihalomethanes (I-THMs) formation in sequential chloramination. UV/H2O2 exhibited much faster IO3- decomposition than either UV or H2O2 treatment alone due to the contribution of highly reactive species including O-, OH and eaq-. The degradation rate of IO3- was affected by H2O2 dosages, pH, UV intensity as well as the presence of natural organic matter (NOM). The calculated pseudo-first order rate constant gradually increased with H2O2 dosages and solution pH, but behaved directly proportional to the UV intensity. Although NOM remarkably reduced the degradation rate of IO3- in UV/H2O2 process, their presence greatly enhanced the formation of I-THMs during subsequent chloramination. The overwhelming majority of iodoform at high UV fluences was also observed, which indicated improved iodination degrees of the detected I-THMs. UV/H2O2 was proved to be more capable on the evolution of IO3- to I- as well as I-THMs than UV and thereby enhanced the toxicity of disinfected waters in the following chloramination process. This study was among the first to provide a comprehensive understanding on the transformation of IO3- as the emerging iodine precursor to form I-THMs via diverse advanced oxidation process technologies like UV/H2O2.

Oxidation of the ß-blocker propranolol by UV/persulfate: Effect, mechanism and toxicity investigation.

In this study, the degradation of propranolol (PRO) by UV/persulfate process was systematically investigated. Direct photolysis of PRO was limited due to its low quantum yield, while the PRO degradation efficiency can be greatly promoted by the combination of persulfate and UV irradiation. Radical scavenging tests showed that both SO4- and OH contributed to the removal of PRO, with SO4- playing a more important role. The degradation rate of PRO was improved by increasing the persulfate dose and initial solution pH consistent with pseudo-first-order reaction kinetics. The effects of common water constituents were species dependent. HCO3- and Cl- promoted PRO degradation. By contrast, NO3- and HA were found to inhibit PRO degradation. A total of nine degradation products were identified by LC/MS/MS, which mainly derived from the ring-opening attack on the naphthalene group or oxidation of the amino moiety by SO4- and OH. Finally, the toxicity of the reaction mixtures was also assessed using luminescent bacteria Vibrio fischeri, and the results indicated that UV/persulfate is capable of controlling the toxicity of PRO degradation.

A simple fluorescent assay for cyromazine detection in raw milk by using CYR-stabilized G-quadruplex formation.

A rapid biosensor for the detection of cyromazine in milk is reported based on a fluorescence quenching result. When an FAM labelled G-rich ssDNA Tcy2 is treated with cyromazine, it can form a G-quadruplex-CYR complex and cause a change in fluorescence. As a result, the presence of cyromazine can be determined by fluorescence quenching. This sensor is selective for the detection of cyromazine in raw milk and has a limit of detection of 0.68 ppb and a detection range from 0 to 200 ppb.

Chlor(am)ination of iopamidol: Kinetics, pathways and disinfection by-products formation.

The degradation kinetics, pathways and disinfection by-products (DBPs) formation of iopamidol by chlorine and chloramines were investigated in this paper. The chlorination kinetics can be well described by a second-order model. The apparent second-order rate constants of iopamidol chlorination significantly increased with solution pH. The rate constants of iopamidol with HOCl and OCl- were calculated as (1.66 ± 0.09) × 10-3 M-1 s-1 and (0.45± 0.02) M-1 s-1, respectively. However, the chloramination of iopamidol fitted well with third-order kinetics and the maximum of the apparent rate constant occurred at pH 7. It was inferred that the free chlorine (i.e., HOCl and OCl-) can react with iopamidol while the combined chlorine species (i.e., NH2Cl and NHCl2) were not reactive with iopamidol. The main intermediates during chlorination or chloramination of iopamidol were identified using ultra performance liquid chromatography - electrospray ionization-mass spectrometry (UPLC-ESI-MS), and the destruction pathways including stepwise deiodination, hydroxylation as well as chlorination were then proposed. The regular and iodinated DBPs formed during chlorination and chloramination of iopamidol were measured. It was found that iodine conversion from iopamidol to toxic iodinated DBPs distinctly increased during chloramination. The results also indicated that although chloramines were much less reactive than chlorine toward iopamidol, they led to the formation of much more toxic iodinated DBPs, especially CHI3.

Phototransformation of iodate by UV irradiation: Kinetics and iodinated trihalomethane formation during subsequent chlor(am)ination.

The photodegradation of IO3- at 254nm and the formation of iodinated trihalomethanes (I-THMs) during subsequent chlorination or chloramination in the presence of natural organic matter (NOM) were investigated in this study. The thermodynamically stable IO3- can be degraded by UV irradiation with pseudo-first order kinetics and the quantum yield was calculated as 0.0591moleinstein-1. Solution pH posed no remarkable influence on the photolysis rate of IO3-. The UV phototransformation of IO3- was evidenced by the determination of iodide (I-) and hypoiodous acid (HOI) in solution. NOM sources not only enhanced the photodegradation rate of IO3- by photoejecting solvated electrons, but also greatly influenced the production I-THMs in subsequent chlor(am)ination processes. In UV irradiation and sequential oxidation processes by chlorine or chloramine, the I-THMs formation was susceptible to NOM sources, especially the two major fractions of aqueous humic substances (humic acid and fulvic acid). The toxicity of disinfected waters greatly increased in chloramination over chlorination of the UV photodecomposed IO3-, as far more I-THMs especially CHI3, were formed. As "the fourth iodine source" of iodinated disinfection by-products, the occurrence, transportation and fate of IO3- in aquatic environment should be of concern instead of being considered a desired iodine sink.

Formation of iodinated trihalomethanes during UV/chloramination with iodate as the iodine source.

Iodinated trihalomethanes (I-THMs) are a group of emerging disinfection by-products with high toxicity, and iodide (I(-)) as well as iodinated organic compounds are expected to be their iodine sources. Nevertheless, in this study, iodate (IO3(-)) was proven to be a new iodine source of I-THM formation during UV/chloramination. In the iodate-containing waters (without any other iodine sources), I-THM formation increased with the increase of UV dose, IO3(-) and NH2Cl concentrations. With the increase of Br(-)/IO3(-) molar ratio, I-THM formation (especially for the brominated species) increased. Besides, NOM species could affect I-THM formation from IO3(-) during UV/chloramination. Fulvic acid could promote IO3(-) phototransformation to I(-) but humic acid impeded the production of I(-) during UV irradiation. Under realistic drinking water treatment conditions (DOC = 5.0 mg-C/L, IO3(-) = 12.7 µg-I/L, UV dose = 50 mJ/cm(2), NH2Cl = 5 mg-Cl2/L), CHCl2I was detected as 0.17 µg/L using solid-phase microextraction method, and the production rate of I-THMs from IO3(-) was about 7% of that from I(-).

Effect of UV irradiation on the proportion of organic chloramines in total chlorine in subsequent chlorination.

This study investigated the changes of chlorine species and proportion of organic chloramines during the chlorination process after UV irradiation pretreatment in drinking water. It was found that the UV pretreatment could enhance the percentage of organic chloramines by increasing free chlorine consumption in the chlorination of raw waters. The percentage of organic chloramines in total chlorine increased with UV intensity and irradiation time in raw waters. However, for the humic acid synthesized water, the percentage of organic chloramines increased first and then decreased with the increase of UV irradiation time. The value of SUVA declined in both raw and humic acid synthesized waters over the UV irradiation time, which indicated that the decomposition of aromatic organic matter by UV could be a contributor to the increase of free chlorine consumption and organic chloramine proportion. The percentage of organic chloramines during chlorination of raw waters after 30-min UV irradiation pretreatment varied from 20.2% to 41.8%. Total chlorine decreased obviously with the increase of nitrate concentration, but the percentage of organic chloramines increased and was linearly correlated to nitrate concentration.

A comparison of iodinated trihalomethane formation from chlorine, chlorine dioxide and potassium permanganate oxidation processes.

This study compared the formation of iodinated trihalomethanes (I-THMs) from iodide-containing raw waters oxidized by chlorine, chlorine dioxide (ClO2) and potassium permanganate (KMnO4) at different oxidant concentrations, reaction times, pHs, initial iodide concentrations and bromide to iodide mass ratios. Among the six investigated I-THMs, iodoform was the major species formed during the oxidation using chlorine, ClO2 and KMnO4. When oxidant concentration increased from 0.1 to 3.0 mg/L, the formation of I-THMs increased and then decreased for chlorine and ClO2, but kept increasing for KMnO4. As the reaction time went by, I-THM concentration increased to a plateau within 10 h (ClO2 within only 1 h, especially) for all the three oxidants. I-THM formation gradually increased from pH 3.0 to 9.0 and remained stable at pH values higher than 7.5 for chlorine; however, for ClO2 and KMnO4 the highest I-THM formation showed at pH 7.0 and 7.5, respectively. As initial iodide concentration increased from 20 to 800 µg/L, the total amount and species of I-THMs increased for the three oxidants. Iodide contributed to I-THM formation much more significantly than bromide.

Kinetic models and pathways of ronidazole degradation by chlorination, UV irradiation and UV/chlorine processes.

Degradation kinetics and pathways of ronidazole (RNZ) by chlorination (Cl2), UV irradiation and combined UV/chlorine processes were investigated in this paper. The degradation kinetics of RNZ chlorination followed a second-order behavior with the rate constants calculated as (2.13 ± 0.15) × 10(2) M(-2) s(-1), (0.82 ± 0.52) × 10(-2) M(-1) s(-1) and (2.06 ± 0.09) × 10(-1) M(-1) s(-1) for the acid-catalyzed reaction, as well as the reactions of RNZ with HOCl and OCl(-), respectively. Although UV irradiation degraded RNZ more effectively than chlorination did, very low quantum yield of RNZ at 254 nm was obtained as 1.02 × 10(-3) mol E(-1). RNZ could be efficiently degraded and mineralized in the UV/chlorine process due to the generation of hydroxyl radicals. The second-order rate constant between RNZ and hydroxyl radical was determined as (2.92 ± 0.05) × 10(9) M(-1) s(-1). The degradation intermediates of RNZ during the three processes were identified with Ultra Performance Liquid Chromatography - Electrospray Ionization - mass spectrometry and the degradation pathways were then proposed. Moreover, the variation of chloropicrin (TCNM) and chloroform (CF) formation after the three processes were further evaluated. Enhanced formation of CF and TCNM precursors during UV/chlorine process deserves extensive attention in drinking water treatment.

[Effects of different pre-oxidants on DBPs formation potential by chlorination and chloramination of Yangtze River raw water].

Yangtze River raw water from Yangshupu Water Plant, Shanghai was studied in this paper for reduced formation potential of chlorination and chloramination disinfection by-products (DBPs) after pre-oxidation by three kinds of common pre-oxidants, whiich were potassium permanganate, chlorine and chlorine dioxide. Results of chlorination showed that removal effectiveness of all the selected oxidants on total chlorination DBPs was not significant, and the reduction percentages by ClO2, Cl2 and KMnO4 were 8.4%, 5.7% and 3.9%, respectively. The order of DBPs control effect was ClO2, > Cl2 > KMnO4. As to Yangtze River raw water in case of chlorine disinfection, using ClO2 as pre-oxidation agent showed relatively better effect on removal of DBPs. However, chloramination results demonstrated that impacts of the three preoxidants on DBPs formation potential were quite different, and the reduction percentages by ClO2 and KMnO4 were 18.1% and 4.1%, respectively, while pre-chlorination increased the potential by 12.3%. These results revealed that ClO2 had the highest removal effectiveness, meanwhile pre-chlorination should be avoided due to its notable increase in DBPs formation.