Exploring the versatility of biodegradable biomass aerogels: In-depth evaluation of Firmiana simplex bark microfibers depolymerized by deep eutectic solvent.

In this study, we investigated the use of deep eutectic solvents (DESs) at different molar ratios and temperatures as a green and efficient approach for microfibers (MFs) extraction. Our approach entailed the utilization of Firmiana simplex bark (FSB) fibers, enabling the production of different dimensions of FSB microfibers (FSBMFs) by combining DES pretreatment and mechanical disintegration technique. The proposed practice demonstrates the simplicity and effectiveness of the method. The morphology of the prepared microfibers was studied using the Scanning electron microscopic (SEM) technique. Additionally, the results revealed that the chemical and mechanical treatments did not significantly alter the well-preserved cellulose structure of microfibers, and a crystallinity index of 56.6 % for FSB fibers and 63.8 % for FSBMFs was observed by X-ray diffraction (XRD) analysis. Furthermore, using the freeze-drying technique, FSBMFs in water solutions produced effective aerogels for air purification application. In comparison to commercial mask (CM), FSBMF aerogels' superior hierarchical cellular architectures allowed them to attain excellent filtration efficiencies of 94.48 % (PM10) and 91.51 % (PM2.5) as well as excellent degradation properties were analyzed. The findings show that FSBMFs can be extracted from Firmiana simplex bark, a natural cellulose-rich material, using DES for environmentally friendly aerogel preparation and applications.

MXene Sediment-Based Poly(vinyl alcohol)/Sodium Alginate Aerogel Evaporator with Vertically Aligned Channels for Highly Efficient Solar Steam Generation.

Solar-driven interfacial evaporation from seawater is considered an effective way to alleviate the emerging freshwater crisis because of its green and environmentally friendly characteristics. However, developing an evaporator with high efficiency, stability, and salt resistance remains a key challenge. MXene, with an internal photothermal conversion efficiency of 100%, has received tremendous research interest as a photothermal material. However, the process to prepare the MXene with monolayer is inefficient and generates a large amount of "waste" MXene sediments (MS). Here, MXene sediments is selected as the photothermal material, and a three-dimensional MXene sediments/poly(vinyl alcohol)/sodium alginate aerogel evaporator with vertically aligned pores by directional freezing method is innovatively designed. The vertical porous structure enables the evaporator to improve water transport, light capture, and high evaporation rate. Cotton swabs and polypropylene are used as the water channel and support, respectively, thus fabricating a self-floating evaporator. The evaporator exhibits an evaporation rate of 3.6 kg m-2 h-1 under one-sun illumination, and 18.37 kg m-2 of freshwater is collected in the condensation collection device after 7 h of outdoor sun irradiation. The evaporator also displays excellent oil and salt resistance. This research fully utilizes "waste" MS, enabling a self-floating evaporation device for freshwater collection.

Underwater Gesture Recognition Meta-Gloves for Marine Immersive Communication.

Rapid advancements in immersive communications and artificial intelligence have created a pressing demand for high-performance tactile sensing gloves capable of delivering high sensitivity and a wide sensing range. Unfortunately, existing tactile sensing gloves fall short in terms of user comfort and are ill-suited for underwater applications. To address these limitations, we propose a flexible hand gesture recognition glove (GRG) that contains high-performance micropillar tactile sensors (MPTSs) inspired by the flexible tube foot of a starfish. The as-prepared flexible sensors offer a wide working range (5 Pa to 450 kPa), superfast response time (23 ms), reliable repeatability (∼10000 cycles), and a low limit of detection. Furthermore, these MPTSs are waterproof, which makes them well-suited for underwater applications. By integrating the high-performance MPTSs with a machine learning algorithm, the proposed GRG system achieves intelligent recognition of 16 hand gestures under water, which significantly extends real-time and effective communication capabilities for divers. The GRG system holds tremendous potential for a wide range of applications in the field of underwater communications.

Electronic Skin Based on Polydopamine-Modified Superelastic Fibers with Superior Conductivity and Durability.

Owing to their excellent elasticities and adaptability as sensing materials, ionic hydrogels exhibit significant promise in the field of intelligent wearable devices. Nonetheless, molecular chains within the polymer network of hydrogels are susceptible to damage, leading to crack extension. Hence, we drew inspiration from the composite structure of the human dermis to engineer a composite hydrogel, incorporating dopamine-modified elastic fibers as a reinforcement. This approach mitigates crack expansion and augments sensor sensitivity by fostering intermolecular forces between the dopamine on the fibers, the hydrogel backbone, and water molecules. The design of this composite hydrogel elevates its breaking tensile capacity from 35 KJ to 203 KJ, significantly enhancing the fatigue resistance of the hydrogel. Remarkably, its electrical properties endure stability even after 2000 cycles of testing, and it manifests heightened sensitivity compared to conventional hydrogel configurations. This investigation unveils a novel method for crafting composite-structured hydrogels.

Core-Sheath Heterogeneous Interlocked Conductive Fiber Enables Smart Textile for Personalized Healthcare and Thermal Management.

Whereas thermal comfort and healthcare management during long-term wear are essentially required for wearable system, simultaneously achieving them remains challenge. Herein, a highly comfortable and breathable smart textile for personal healthcare and thermal management is developed, via assembling stimuli-responsive core-sheath dual network that silver nanowires(AgNWs) core interlocked graphene sheath induced by MXene. Small MXene nanosheets with abundant groups is proposed as a novel "dispersant" to graphene according to "like dissolves like" theory, while simultaneously acting as "cross-linker" between AgNWs and graphene networks by filling the voids between them. The core-sheath heterogeneous interlocked conductive fiber induced by MXene "cross-linking" exhibits a reliable response to various mechanical/electrical/light stimuli, even under large mechanical deformations(100%). The core-sheath conductive fiber-enabled smart textile can adapt to movements of human body seamlessly, and convert these mechanical deformations into character signals for accurate healthcare monitoring with rapid response(440 ms). Moreover, smart textile with excellent Joule heating and photothermal effect exhibits instant thermal energy harvesting/storage during the stimuli-response process, which can be developed as self-powered thermal management and dynamic camouflage when integrated with phase change and thermochromic layer. The smart fibers/textiles with core-sheath heterogeneous interlocked structures hold great promise in personalized healthcare and thermal management.

Autonomous Electroluminescent Textile for Visual Interaction and Environmental Warning.

Visual interaction is a promising strategy for the externalized expression and transmission of information, having wide application prospects in wearable luminous textiles. Achieving an autonomous luminous display and dynamic light response to environmental stimuli is attractive but attracts little attention. Herein, we propose a liquid responsive structure based on alternating-current electroluminescent fibers and demonstrate conductive-liquid-bridging electroluminescent fabrics with high integration and personalized patterns. Impressively, our electroluminescent fibers and textiles could afford a sensitive response and high robustness to water, glycerol, ethanol, and sodium chloride solution. The final electroluminescent textiles show an excellent luminescence performance of 149.08 cd m-2. On the proof of concept, a rain-sensing umbrella, luminous sportswear, and liquid response glove are fabricated to demonstrate water detection, visual interaction, and environmental warning. The textile-type visualizing-responding strategy proposed in this work may open up new avenues for the application of ACEL devices in the field of visual interaction.

Template-Free and Stretchable Conductive Fiber with a Built-In Helical Structure for Strain-Insensitive Signal Transmission.

With the rapid development of intelligent electronic devices, conductive fibers have become very critical to signal transmission devices. However, metal-based rigid conductive wires, such as high-modulus copper and silver wires, are prone to signal failure owing to tensile breakage under large strain conditions. Therefore, strain-insensitive stretchable conductive fibers for signal transmission are critical for next-generation wearable devices. Herein, a stretchable conductive fiber with a built-in helical structure is constructed by a "speed discrepancy" fiber-coating strategy with mass scalable production (60 cm/min). Such a "speed discrepancy" strategy is the key mechanism to template-free fabricate a built-in helical structure of the stretchable conductive fiber. The resultant fiber exhibits high conductivity (873 S/cm), stable insensitive signal transmission with a high quality factor (47.4), and a low relative resistance change (∼6%) under large strain. The built-in helical structure inspired by loofah whiskers endows the fiber with excellent strain insensitivity, and it can withstand large strains. On the proof of concept, our fiber can be seamlessly knitted, woven, and braided into smart textiles as an ideal signal transmission device under large strains, which will undoubtedly promote the development of intelligent electronic textiles and next-generation wearable devices.

BRCA genes as candidates for colorectal cancer genetic testing panel: systematic review and meta-analysis.

BACKGROUND: Breast cancer susceptibility gene (BRCA) mutation carriers are at an increased risk for breast, ovarian, prostate and pancreatic cancers. However, the role of BRCA is unclear in colorectal cancer; the results regarding the association between BRCA gene mutations and colorectal cancer risk are inconsistent and even controversial. This study aimed to investigate whether BRCA1 and BRCA2 gene mutations are associated with colorectal cancer risk. METHODS: In this systematic review, we searched PubMed/MEDLINE, Embase and Cochrane Library databases, adhering to PRISMA guidelines. Study quality was assessed using the Newcastle-Ottawa Scale (NOS). Unadjusted odds ratios (ORs) were used to estimate the probability of Breast Cancer Type 1 Susceptibility gene (BRCA1) and Breast Cancer Type 2 Susceptibility gene (BRCA2) mutations in colorectal cancer patients. The associations were evaluated using fixed effect models. RESULTS: Fourteen studies were included in the systematic review. Twelve studies, including seven case-control and five cohort studies, were included in the meta-analysis. A significant increase in the frequency of BRCA1 and BRCA2 mutations was observed in patients with colorectal cancer [OR = 1.34, 95% confidence interval (CI) = 1.02-1.76, P = 0.04]. In subgroup analysis, colorectal cancer patients had an increased odds of BRCA1 (OR = 1.48, 95% CI = 1.10-2.01, P = 0.01) and BRCA2 (OR = 1.56, 95% CI = 1.06-2.30, P = 0.02) mutations. CONCLUSIONS: BRCA genes are one of the genes that may increase the risk of developing colorectal cancer. Thus, BRCA genes could be potential candidates that may be included in the colorectal cancer genetic testing panel.

Sarcobesity, but not visceral fat, is an independent risk factor for complications after radical resection of colorectal cancer.

Background: The influence of body composition on the outcome of colorectal cancer surgery is controversial. The aim of this study was to evaluate the effects of visceral obesity and sarcobesity on the incidence of total and surgical complications after radical resection of colorectal cancer. Methods: We collected a total of 426 patients who underwent elective radical resection of colorectal cancer at Beijing Friendship Hospital, Capital Medical University from January 2017 to May 2018. According to the inclusion and exclusion criteria, 387 patients were finally included. A CT scan at the level of the L3-L4 intervertebral disk was selected to measure the values of visceral fat area and skeletal muscle area. Multivariate analysis was used to explore the independent risk/protective factors affecting postoperative complications. Results: 128 (33.1%) patients developed complications, and 44 (11.4%) patients developed major complications. Among them, 111 patients developed surgical complications and 21 developed medical complications. Visceral fat area (Z = -3.271, p = 0.001), total fat area (Z = -2.613, p = 0.009), visceral fat area to subcutaneous fat area ratio (V/S, Z = -2.633, p = 0.008), and sarcobesity index (Z = -2.282, p = 0.023) were significantly associated with total complications. Visceral fat area (Z = -2.119, p = 0.034) and V/S (Z = -2.010, p = 0.044) were significantly associated with total surgical complications. Sarcobesity index, smoking, stoma, blood loss, surgery time, and American Society of Anesthesiology (ASA) score were selected as risk factors for total postoperative complications according to LASSO regression. Multivariate logistic regression analysis suggested that sarcobesity index was an independent risk factor for postoperative total complications and surgical complications. Subgroup analysis suggested that albumin level was an independent protective factor for postoperative total complications in male patients. Smoking, operative time, and sarcobesity index were independent risk factors, and cholesterol was an independent protective factor for total postoperative complications in female patients. Conclusion: Increased sarcobesity index is an independent risk factor for postoperative complications in patients with colorectal cancer, while visceral fat area is not. For female patients, smoking, operation time, and obesity index are independent risk factors for postoperative complications, while cholesterol is an independent protective factor. For male patients, serum albumin is an independent protective factor for postoperative complications.

Skin-Friendly and Wearable Iontronic Touch Panel for Virtual-Real Handwriting Interaction.

Touch panels are deemed as a critical platform for the future of human-computer interaction and metaverse. Recently, stretchable iontronic touch panels have attracted attention due to their superior adhesivity to the human body. However, such adhesion can not be named "real wearable", leading to discomfort for the wearer, such as rashes or itching with long-time wearing. Herein, a skin-friendly and wearable iontronic textile-based touch panel with highly touch-sensing resolution and deformation insensitivity is designed based on an in-suit growing strategy. This textile-based touch panel endows excellent interfacial hydrophilic and biocompatibility with human skin by overcoming the bottlenecks of the hydrogel-based uncomfortable sticky touch interface and low mechanical behavior. The developed touch panel enables handwriting interaction with good mechanical capacity (114 MPa), nearly 4145 times higher than pure hydrogel. More importantly, our touch panel possesses intrinsic insensitivity to wide external loading from the silver fiber (<0.003 g) to even heavy metal block (>10 kg). As proof of concept, the textile-based iontronic touch panel is applied to handwriting interaction, such as a flexible keyboard and wearable sketchpad. This iontronic touch panel with skin-friendly and wearable qualitities is helpful for next-generation wearable interaction electronics.

Wearable and Flexible Multifunctional Sensor Based on Laser-Induced Graphene for the Sports Monitoring System.

The conversion of diverse polymeric substrates into laser-induced graphene (LIG) has recently emerged as a single-step method for the fabrication of patterned graphene-based wearable electronics with a wide range of applications in sensing, actuation, and energy storage. Laser-induced pyrolysis technology has many advantages over traditional graphene design: eco-friendly, designable patterning, roll-to-roll production, and controllable morphology. In this work, we designed wearable and flexible graphene-based strain and pressure sensors by laminating LIG from a commercial polyimide (PI) film. The as-prepared LIG was transferred onto a thin polydimethylsiloxane (PDMS) sheet, interwoven inside an elastic cotton sports fabric with the fabric glue as a wearable sensor. The single LIG/PDMS layer acts as a strain sensor, and a two-layer perpendicular stacking of LIG/PDMS (x and y laser-directed films) is designed for pressure sensing. This newly designed graphene textile (IGT) sensor performs four functions in volleyball sportswear, including volleyball reception detection, finger touch foul detection during blocking the ball from an opponent player, spike force measurements, and player position monitoring. An inexpensive sensor assists athletes in training and helps the coach formulate competition strategies.

Precise Control of the Preparation of Proton Exchange Membranes via Direct Electrostatic Deposition.

In this work, we reported a novel preparation method for a proton exchange membrane (PEM) named, the direct electrostatic deposition method. In theory, any required thickness and size of PEM can be precisely controlled via this method. By direct electrostatic spraying of Nafion solution containing amino modified SiO2 nanoparticles onto a metal collector, a hybrid membrane of 30 µm thickness was fabricated. The DMFC assembled with a prepared ultrathin membrane showed a maximum power density of 124.01 mW/cm2 at 40 °C and 100% RH, which was 95.29% higher than that of Nafion. This membrane formation method provides potential benefits for the preparation of ultrathin PEMs.

3D-Printed Parahydrophobic Functional Textile with a Hierarchical Nanomicroscale Structure.

Functional textiles with superhydrophobicity and high adhesion to water, called parahydrophobic, are attracting increasing attention from industry and academia. The hierarchical (micronanoscale) surface patterns in nature provide an excellent reference for the manufacture of parahydrophobic functional textiles. However, the replication of the complex parahydrophobic micronanostructures in nature exceeds the ability of traditional manufacturing strategies, which makes it difficult to accurately manufacture controllable nanostructures on yarn and textiles. Herein, a two-photon femtosecond laser direct writing strategy with nanoscale process capability was utilized to accurately construct the functional parahydrophobic yarn with a diameter of 900 µm. Inspired by rose petals, the parahydrophobic yarn is composed of a hollow round tube, regularly arranged micropapillae (the diameter is 109 µm), and nanofolds (the distance is 800 nm) on papillae. The bionic yarn exhibited a superior parahydrophobic behavior, where the liquid droplet not only was firmly adhered to the bionic yarn at an inverted angle (180°) but also presented as spherical on the yarn (the maximum water contact angle is 159°). The fabric woven by the bionic yarn also exhibited liquid droplet-catching ability even when tilted vertically or turned upside down. Based on the excellent parahydrophobic function of bionic yarn, we demonstrated a glove that has very wide application potential in the fields of water droplet-based transportation, manipulation, microreactors, microextractors, etc.

Dynamic Equivalent Resistance Model of Knitted Strain Sensor under In-Plane and Three-Dimensional Surfaces Elongation.

The dynamic equivalent resistance is a major index that determines the sensing performance of knitted strain sensors, and has the characteristics of in-plane and three-dimensional curved strain sensing. Therefore, in addition to establishing the in-plane equivalent resistance, it is necessary to establish a three-dimensional equivalent resistance model to fully explain the surface sensing performance. This project establishes two equivalent resistance models of knitted strain sensors under in-plane deformation and one equivalent resistance model of three-dimensional curved surface strain. Based on the length of resistance and the geometric topological structure, an in-plane strain macro-micro equivalent resistance model and a topological equivalent resistance model are established, respectively. In addition, a three-dimensional curved surface equivalent resistance model is created based on the volume resistance. By comparing the theoretical model with the experimental data, the results prove that the proposed in-plane and three-dimensional models can be utilized to calculate the resistance change of knitted strain sensors. Length resistance, coil transfer, and curved surface deformation depth are the main factors that affect the equivalent resistance of knitted strain sensors.

Biomimetic Hierarchically Silver Nanowire Interwoven MXene Mesh for Flexible Transparent Electrodes and Invisible Camouflage Electronics.

Flexible transparent electrodes demand high transparency, low sheet resistance, as well as excellent mechanical flexibility simultaneously, however they still remain to be a great challenge due to"trade-off" effect. Herein, inspired by a hollow interconnected leaf vein, we developed robust transparent conductive mesh with biomimetic interwoven structure via hierarchically self-assembles silver nanowires interwoven metal carbide/nitride (MXene) sheets along directional microfibers. Strong interfacial interactions between plant fibers and conductive units facilitate hierarchically interwoven conductive mesh constructed orderly on flexible and lightweight veins while maintaining high transparency, effectively avoiding the trade-off effect between optoelectronic properties. The flexible transparent electrodes exhibit sheet resistance of 0.5 Ω sq-1 and transparency of 81.6%, with a remarkably high figure of merit of 3523. In addition, invisible camouflage sensors are further successfully developed as a proof of concept that could monitor human body motion signals in an imperceptible state. The flexible transparent conductive mesh holds great potential in high-performance wearable optoelectronics and camouflage electronics.

Progress of Wearable and Flexible Electrochemical Biosensors With the Aid of Conductive Nanomaterials.

Conductive nanomaterials have recently gained a lot of interest due to their excellent physical, chemical, and electrical properties, as well as their numerous nanoscale morphologies, which enable them to be fabricated into a wide range of modern chemical and biological sensors. This study focuses mainly on current applications based on conductive nanostructured materials. They are the key elements in preparing wearable electrochemical Biosensors, including electrochemical immunosensors and DNA biosensors. Conductive nanomaterials such as carbon (Carbon Nanotubes, Graphene), metals and conductive polymers, which provide a large effective surface area, fast electron transfer rate and high electrical conductivity, are summarized in detail. Conductive polymer nanocomposites in combination with carbon and metal nanoparticles have also been addressed to increase sensor performance. In conclusion, a section on current challenges and opportunities in this growing field is forecasted at the end.

Smart Textile Based on 3D Stretchable Silver Nanowires/MXene Conductive Networks for Personal Healthcare and Thermal Management.

Wearable electronics have enriched daily lives by providing smart functions as well as monitoring body health conditions. However, the realization of wearable electronics with personal healthcare and thermal comfort management of the human body is still a great challenge. Furthermore, manufacturing such on-skin wearable electronics on traditional thin-film substrates results in limited gas permeability and inflammation. Herein, we proposed a personal healthcare and thermal management smart textile with a three-dimensional (3D) interconnected conductive network, formed by silver nanowires (AgNWs) bridging lamellar structured transition-metal carbide/carbonitride (MXene) nanosheets deposited on nonwoven fabrics. Benefiting from the interconnected conductive network synergistic effect of one-dimensional (1D) AgNWs bridging two-dimensional (2D) MXene, the strain sensor exhibits excellent durability (>1500 stretching cycles) and high sensitivity (gauge factor (GF) = 1085) with a wide strain range limit (∼100%), and the details of human body activities can be accurately recognized and monitored. Moreover, thanks to the excellent Joule heating and photothermal effect endowed by AgNWs and MXene, the multifunctional smart textile with direct temperature visualization and solar-powered temperature regulation functions was successfully developed, after further combination of thermochromic and phase-change functional layers, respectively. The smart textiles with a stretchable AgNW-MXene 3D conductive network hold great promise for next-generation personal healthcare and thermal management wearable systems.

Touch-sensing fabric encapsulated with hydrogel for human-computer interaction.

Flexible touch-sensing devices have attracted extensive attention in wearable electronics and human-machine interaction. The ionic touch-sensing hydrogels are ideal candidates for these scenarios, but the absorbed water evaporates easily from the hydrogel, reducing their working time and stability. Herein, we propose a touch-sensing fabric system composed of non-woven cellulose fabrics as a sheath shell layer encapsulated with a hydrogel filling layer. The resultant touch-sensing fabric has a super-thin structure (1 mm) and exhibits a low detecting threshold (50 Pa), high durability (100k times), strain/pressure insensitivity and extremely high touch positioning accuracy. In the proof of concept, a smart touch-sensing glove is equipped with our fabric, which can execute human-computer interaction as a flexible touch-sensing device.

Wearable Sunlight-Triggered Bimorph Textile Actuators.

Photothermal bimorph actuators have attracted considerable attention in intelligent devices because of their cordless control and lightweight and easy preparation. However, current photothermal bimorph actuators are mostly based on films or papers driven by near-infrared sources, which are deficient in flexibility and adaptability, restricting their potential in wearable applications. Herein, a bimorph textile actuator that can be scalably fabricated with a traditional textile route and autonomously triggered by sunlight is reported. The active layer and passive layer of the bimorph are constructed by polypropylene tape and a MXene-modified polyamide filament. Because of the opposite thermal expansion and MXene-enhanced photothermal efficiency (>260%) of the bimorph, the textile actuator presents effective deformation (1.38 cm-1) under low sunlight power (100 mW/cm2). This work provides a new pathway for wearable sunlight-triggered actuators and finds attractive applications for smart textiles.