ABSTRACT
The effect of water, methanol, and hexane vapors on gas permeability was studied in a hybrid membrane containing 5 wt% copolyimide brushes with poly(methyl methacrylate) side chains (PI-g-PMMA) in a poly(phenylene oxide) (PPO) matrix, and in a pristine PPO membrane. These membranes in the form of dense nonporous films were further examined by atomic force microscopy (AFM) and scanning electron microscopy (SEM), as well as by measuring their mechanical and gas transport properties. A gas separation study of the membranes in a dry state and the membranes saturated with water, methanol, and hexane vapors was performed to estimate the effect of each vapor on the H2, CO2, N2 permeability and selectivity in the separation of H2/N2 and CO2/N2 pairs. In general, saturation with water, methanol, and hexane vapors caused a decrease in the gas permeability of both membranes. The hybrid membrane containing copolyimide brushes demonstrated enhanced selectivity in the separation of H2/N2 and CO2/N2 pairs. It was found that a special effect of the vapors used for membrane saturation is associated with their molar volume. The solubility and diffusion coefficients of N2 and CO2 were obtained by Grand Canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations.
ABSTRACT
A novel hybrid membrane was developed on the basis of poly(m-phenylene isophthalamide) (PA) by introducing an original complex modifier into the polymer; this modifier consisted of equal amounts of heteroarm star macromolecules with a fullerene C60 core (HSM) and the ionic liquid [BMIM][Tf2N] (IL). The effect of the (HSM:IL) complex modifier on characteristics of the PA membrane was evaluated using physical, mechanical, thermal, and gas separation techniques. The structure of the PA/(HSM:IL) membrane was studied by scanning electron microscopy (SEM). Gas transport properties were determined by measuring He, O2, N2, and CO2 permeation through the membranes based on PA and its composites containing a 5 wt% modifier. The permeability coefficients of all gases through the hybrid membranes were lower than the corresponding parameters for the unmodified membrane, whereas the ideal selectivity in the separation of He/N2, CO2/N2, and O2/N2 gas pairs was higher for the hybrid membrane. The position of the PA/(HSM:IL) membrane on the Robeson's diagram for the O2/N2 gas pair is discussed.
ABSTRACT
Poly(2,2'-biquinoline-6,6'-dicarbohydrazide)-co-(bistrimelliteimide)methylene-bisanthranylide (PHI) and its metal-polymer complex PHI-Cu(I) containing several types of functional groups (hydrazide, carboxyl, amide, and imide fragments) were synthesized to prepare two types of dense nonporous membranes. The study on morphology using scanning electron microscopy (SEM), measurements of mechanical, thermal, and transport properties of the membrane samples was carried out. The main mechanical properties of both membranes do not differ significantly, but the values of ultimate deformation differ palpably as a result of a non-uniform character of the deformation process for the PHI membrane. The thermal analysis based on the curves of thermogravimetric (TGA) and differential thermal (DTA) analyses of the PHI and PHI-Cu(I) membranes revealed peculiarities of the membrane structure. Transport properties were studied in pervaporation (PV) of methanol (MeOH) and dimethyl carbonate (DMC) mixtures including an azeotropic point. Intrinsic properties of the penetrant-membrane system were also determined. It was found that the total flux is higher through the PHI membrane, but the PHI-Cu(I) membrane exhibits a higher separation factor. Calculation of the pervaporation separation index (PSI) allowed to conclude that the PHI-Cu(I) membrane exhibits better transport properties as compared with the PHI membrane.
ABSTRACT
In this study, novel composites were produced by blending partially cyclized polyacrylonitrile (cPAN) and poly(amide-imide) (PAI) in N-methylpyrrolidone in order to fabricate asymmetric membranes via phase inversion method. The compatibility of PAI and cPAN through possible intermolecular interaction was examined by quantum chemical calculations. The composite membranes were characterized by FTIR, SEM, contact angle measurements, etc. A considerable reduction in the contact angles of water and ethylene glycol (EG) was observed after adding cPAN to the PAI membrane, which is evidence of improved membrane hydrophilicity. Membrane transport properties were investigated in ultrafiltration tests by measuring the pure water flux, rejection of proteins, and flux recovery ratio (FRR). The best properties were found for the membrane containing 5 wt% cPAN; an increase in BSA rejection and a remarkable increase in FRR were observed, which can be explained by the hydrophilization of the membrane surface provided by the presence of cPAN.
