UV-Vis LED-assisted photo-Fenton process for mineralization of losartan and hydrochlorothiazide: optimization using desirability function.

This study presents the results obtained for the optimization of the mineralization of losartan (LOS) and hydrochlorothiazide (HCTZ) using the photo-Fenton process with a UV-Vis LED. Experimental design optimization employing a Doehlert matrix and a global desirability function enabled simultaneous evaluation of multiple responses, with factor fitting providing the best conditions that maximized the mineralization efficiency: Fe2+ at 10 mg L-1 and H2O2 at 100 mg L-1. High rates of mineralization of LOS and HCTZ were obtained, with dissolved organic carbon (DOC); removal of almost 75% after 90 min was observed for both pharmaceuticals. The kinetic model showed that the mineralization followed two regimes in the first minutes, with a fast progression followed by slower activity. The energy consumption calculated for mineralization of LOS and HCTZ at a concentration of 20 mg L-1 using the UV-Vis LED-assisted photo-Fenton process, at 60 min, was 130 kWh m-3. The desirability function provides a useful tool for finding optimal experimental conditions for the treatment of effluents with different characteristics. The UV-Vis LED was shown to be a good light source in the photo-Fenton process.

Degradation and ecotoxicity of dye Reactive Black 5 after reductive-oxidative process : Environmental Science and Pollution Research.

This research paper describes the study of a reduction-oxidation system using commercial steel wool (Fe0) and H2O2 for degradation of the dye Reactive Black 5 and aromatic compounds in water. The reductive process alone allowed the almost complete removal of color (97 ± 1 %) after 60 min of reaction. The decrease in spectral area (λ = 599 nm) associated with the chromophore group indicates breakage of the azo bonds. Moreover, the significant change in UV spectra can be associated with the formation of aromatic amines. Regarding the transformation products, a spectrophotometric method based on the diazotization reaction was employed to identify aromatic amines after reductive process, using sulfanilic acid as a model of aromatic amines. In addition, association with Fenton reagents improved the efficiency in the system with 93 ± 1 % degradation of intermediates formed during the reductive process. Ecotoxicological analysis revealed that the dye solution, after the reductive and oxidative processes, was not toxic to Lactuca sativa seeds. For Daphnia magna, the EC50 (%) values observed revealed that dye solution has an EC50(%) = 74.1 and after reductive process, the toxicity increased (EC50(%) = 63.5), which might be related to the formation of aromatic amines. However, after the Fenton process, the EC50 (%) was >100. These results demonstrated that the Fenton reaction using steel wool as an iron source was very efficient to decrease color, aromatic transformation products, and the ecotoxicity of Reactive Black 5 in solution.

Treatment of gasoline-contaminated waters by advanced oxidation processes.

In this study, the efficiency of advanced oxidative processes (AOPs) was investigated toward the degradation of aqueous solutions containing benzene, toluene and xylenes (BTX) and gasoline-contaminated waters. The results indicated that BTX can be effectively oxidized by near UV-assisted photo-Fenton process. The treatment permits almost total degradation of BTX and removal of more than 80% of the phenolic intermediates at reaction times of about 30 min. Preliminary investigations using water contaminated by gasoline suggest a good potentiality of the process for the treatment of large volumes of aqueous samples containing these polluting species. Heterogeneous photocatalysis and H2O2/UV system show lower degradation efficiency, probably due to the heterogeneous character of the TiO2-mediated system and lost of photonic efficiency of the H2O2/UV system in the presence of highly colored intermediated.