SCAPS study on the effect of various hole transport layer on highly efficient 31.86% eco-friendly CZTS based solar cell.

Copper Zinc Tin Sulphide (CZTS) is a propitious semiconductor for active absorber material in thin-film solar cells (SCs). Here, SC architecture comprising FTO/ZnS/CZTS/variable HTLs/Au is discussed. Fluorine-doped tin oxide (FTO) and gold (Au) are used as front and back contacts, respectively. Zinc sulphide (ZnS) is used as an active electron transport layer (ETL), while different Cu-based materials (Cu2O, CuO, CuI, and CuSCN) are used as hole transport layers (HTL). A one-dimensional solar cell capacitance simulator (SCAPS-1D) is utilized to simulate the SC structure. Among different Cu-based HTLs, Cu2O is preferred as a potential candidate for high cell performance of CZTS-based SC. The effects of various layer parameters such as thickness, doping density, and carrier concentrations, electron affinity of HTL and absorber, respectively, are also discussed. After optimization of the device, variation of operating temperature and the effect of series and shunt resistance are also taken into consideration. The optimized results of thickness and acceptor concentration (NA) of absorber material are 1.5 µm and approx. 1.0 × 1019 cm-3, respectively. In addition, the function of HTL (with and without) in the designed SC structure is also studied. Capacitance-voltage (C-V) characteristics are also discussed to get an insight of built-in potential. We have achieved cell performances viz. efficiency = 31.86%, short circuit current density = 32.05 mA/cm2, open circuit voltage = 1.19 V, and fill factor = 83.37%.

Low vacuum annealing of cellulose acetate on nickel towards transparent conductive CNT-graphene hybrid films.

We report a versatile method based on low vacuum annealing of cellulose acetate on nickel (Ni) surface for rapid fabrication of graphene and carbon nanotube (CNT)-graphene hybrid films with tunable properties. Uniform films mainly composed of tri-layer graphene can be achieved via a surface precipitation of dissociated carbon at 800 °C for 30 seconds under vacuum conditions of ∼0.6 Pa. The surface precipitation process is further found to be efficient for joining the precipitated graphene with pre-coated CNTs on the Ni surface, consequently, generating the hybrid films. As expected, the hybrid films exhibit substantial opto-electrical and field electron emission properties superior to their individual counterparts. The finding suggests a promising route to hybridize the graphene with diverse nanomaterials for constructing novel hybrid materials with improved performances.

Interconnected Pt-nanodendrite/DNA/reduced-graphene-oxide hybrid showing remarkable oxygen reduction activity and stability.

Controlling the morphology and size of platinum nanodendrites (PtDs) is a key factor in improving their catalytic activity and stability. Here, we report the synthesis of PtDs on genomic-double-stranded-DNA/reduced-graphene-oxide (gdsDNA/rGO) by the NaBH4 reduction of H(2)PtCl(6) in the presence of plant gdsDNA. Compared to industrially adopted catalysts (i.e., state-of-the-art Pt/C catalyst, Pt/rGO, Pt(3)Co, etc.), the as-synthesized PtDs/gdsDNA/rGO hybrid displays very high oxygen reduction reaction (ORR) catalytic activities (much higher than the 2015 U.S. Department of Energy (DOE) target values), which are the rate-determining steps in electrochemical energy devices, in terms of onset-potential, half-wave potential, specific-activity, mass-activity, stability, and durability. Moreover, the hybrid exhibits a highly stable mass activity for the ORR over a wide pH range of 1-13. These exceptional properties would make the hybrid applicable in next-generation electrochemical energy devices.

Stable platinum nanoclusters on genomic DNA-graphene oxide with a high oxygen reduction reaction activity.

Nanosize platinum clusters with small diameters of 2-4 nm are known to be excellent catalysts for the oxygen reduction reaction. The inherent catalytic activity of smaller platinum clusters has not yet been reported due to a lack of preparation methods to control their size (<2 nm). Here we report the synthesis of platinum clusters (diameter ≤1.4 nm) deposited on genomic double-stranded DNA-graphene oxide composites, and their high-performance electrocatalysis of the oxygen reduction reaction. The electrochemical behaviour, characterized by oxygen reduction reaction onset potential, half-wave potential, specific activity, mass activity, accelerated durability test (10,000 cycles) and cyclic voltammetry stability (10,000 cycles) is attributed to the strong interaction between the nanosize platinum clusters and the DNA-graphene oxide composite, which induces modulation in the electronic structure of the platinum clusters. Furthermore, we show that the platinum cluster/DNA-graphene oxide composite possesses notable environmental durability and stability, vital for high-performance fuel cells and batteries.

Thermal transformation of carbon hybrid materials to graphene films.

We demonstrate a simple approach to grow graphene films on polycrystalline nickel (Ni) foils, in which polycrystalline carbon hybrid materials (CHMs) were used in sandwich structures (molybdenum-CHMs-Ni-molybdenum) as a carbon source for graphene, and pressure was then applied to the sandwich. The CHMs were transformed into single as well as few layer graphene by a segregation-precipitation process. The applied pressure not only increased the density of the graphene films but also reduced the vaporization of dissociated carbon molecules of the CHMs. We have explored the possibility to grow graphene films in low vacuum (5 × 10(-1) Pa) at relatively low temperatures (≤750 °C). The formation of the graphene films at 750 °C is simple and cost-effective and can be scaled up.

Synthesis of graphene film from fullerene rods.

Here we demonstrate a facile approach to grow uniform and large area single layer graphene directly over polycrystalline metal foil from fullerene, where fullerene molecules formed rod-like polycrystals in the toluene solvent. The generated pressure on sandwich structures has enhanced the density (scalable) as well as quality of graphene at partially low temperatures.

Synthesis of Pt nanopetals on highly ordered silicon nanocones for enhanced methanol electrooxidation activity.

Platinum (Pt) nanopetals were electrodeposited on highly ordered silicon nanocones (SiNCs) and explored as the electrocatalyst for methanol oxidation reaction (MOR) for direct methanol fuel cells applications. Highly ordered SiNCs array fabricated using the porous anodic aluminum oxide as the template had a high surface area. Well-dispersed Pt nanopetals possessing high electrocatalytic surface area was synthesized by pulse-electrodeposition on the SiNCs. Pt nanopetals loaded on highly ordered SiNC support exhibited very good catalytic activity for MOR and a high tolerance against CO poisoning, as compared to Pt nanoflowers/flat Si, Pt nanoparticles/flat Si, and many previously reported works. The abundance of a large surface area for facile transport of methanol, SiO(2) sites in the vicinity of the SiNCs, as well as less contact area between the Pt nanopetals catalyst and SiNCs are suggested to be the major factors enhancing the electrocatalytic performance of the Pt nanopetal/SiNC electrode. Moreover, we believe this new nanostructure (Pt nanopetals/SiNCs) will enable many new advances in nanotechnology.

Thin-film composite materials as a dielectric layer for flexible metal-insulator-metal capacitors.

A new organic-organic nanoscale composite thin-film (NCTF) dielectric has been synthesized by solution deposition of 1-bromoadamantane and triblock copolymer (Pluronic P123, BASF, EO20-PO70-EO20), in which the precursor solution has been achieved with organic additives. We have used a sol-gel process to make a metal-insulator-metal capacitor (MIM) comprising a nanoscale (10 nm-thick) thin-film on a flexible polyimide (PI) substrate at room temperature. Scanning electron microscope and atomic force microscope revealed that the deposited NCTFs were crack-free, uniform, highly resistant to moisture absorption, and well adhered on the Au-Cr/PI. The electrical properties of 1-bromoadamantane-P123 NCTF were characterized by dielectric constant, capacitance, and leakage current measurements. The 1-bromoadamantane-P123 NCTF on the PI substrate showed a low leakage current density of 5.5 x 10(-11) A cm(-2) and good capacitance of 2.4 fF at 1 MHz. In addition, the calculated dielectric constant of 1-bromoadamantane-P123 NCTF was 1.9, making them suitable candidates for use in future flexible electronic devices as a stable intermetal dielectric. The electrical insulating properties of 1-bromoadamantane-P123 NCTF have been improved due to the optimized dipole moments of the van der Waals interactions.

A promising approach to the synthesis of 3D nanoporous graphitic carbon as a unique electrocatalyst support for methanol oxidation.

A 3D nanoporous graphitic carbon (g-C) material is synthesized by using an adamantane (C(10)H(16)) flame, and utilized to support a Pt(50)-Ru(50) alloy catalyst. The physico-chemical properties of the Pt(50)-Ru(50)/3D nanoporous g-C electrode are examined by a range of spectroscopy techniques as well as Brunauer-Emmett-Teller surface area analysis. Cyclic voltammetry measurements are used for electrochemical characterization of the Pt(50)-Ru(50)/3D nanoporous g-C electrode. The electrochemical investigations show that the supported Pt(50)-Ru(50) has excellent activity and stability towards methanol electro-oxidation. Good CO tolerance is also shown, and considered to be due to the presence of Ru nanoparticles. It is proposed that Ru is able to promote the oxidation of strongly adsorbed CO on Pt by supplying an oxygen source: Ru(OH)(ad). Moreover, the presence of 3D nanopores in the g-C support may also contribute to the observed higher current density by virtue of the easy transport of methanol and the oxidation products through these nanopores.

Facile synthesis of continuous Pt island networks and their electrochemical properties for methanol electrooxidation.

A two-dimensional continuous Pt island network was successfully synthesized by pulse-potentiostatic electrodeposition on a flat silicon substrate, which showed markedly enhanced catalytic activity toward methanol electrooxidation and high CO tolerance, probably due to the synergistic effect of the Pt island catalyst and surrounding SiO(2) surface layer.