Neuro-Fuzzy Dynamic Position Prediction for Autonomous Work-Class ROV Docking.

This paper presents a docking station heave motion prediction method for dynamic remotely operated vehicle (ROV) docking, based on the Adaptive Neuro-Fuzzy Inference System (ANFIS). Due to the limited power onboard the subsea vehicle, high hydrodynamic drag forces, and inertia, work-class ROVs are often unable to match the heave motion of a docking station suspended from a surface vessel. Therefore, the docking relies entirely on the experience of the ROV pilot to estimate heave motion, and on human-in-the-loop ROV control. However, such an approach is not available for autonomous docking. To address this problem, an ANFIS-based method for prediction of a docking station heave motion is proposed and presented. The performance of the network was evaluated on real-world reference trajectories recorded during offshore trials in the North Atlantic Ocean during January 2019. The hardware used during the trials included a work-class ROV with a cage type TMS, deployed using an A-frame launch and recovery system.

Vision-Based Localization System Suited to Resident Underwater Vehicles.

In recent years, we have seen significant interest in the use of permanently deployed resident robotic vehicles for commercial inspection, maintenance and repair (IMR) activities. This paper presents a concept and demonstration, through offshore trials, of a low-cost, low-maintenance, navigational marker that can eliminate drift in vehicle INS solution when the vehicle is close to the IMR target. The subsea localisation marker system is fixed on location on the resident field asset and is used in on-vehicle machine vision algorithms for pose estimation and facilitation of a high-resolution world coordinate frame registration with a high refresh rate. This paper presents evaluation of the system during trials in the North Atlantic Ocean during January 2019. System performances and propagation of position error is inspected and estimated, and the effect of intermittent visual based position update to Kalman filter and onboard INS solution is discussed. The paper presents experimental results of the commercial state-of-the-art inertial navigation system operating in the pure inertial mode for comparison.

Real-Time Secure/Unsecure Video Latency Measurement/Analysis with FPGA-Based Bump-in-the-Wire Security.

With the growth of the internet of things (IoT), many challenges like information security and privacy, interoperability/standard, and regulatory and legal issues are arising. This work focused on the information security issue, which is one of the primary challenges faced by connected systems that needs to be resolved without impairing system behaviour. Information, which is made available on the Internet by the things, varies from insensitive information (e.g., readings from outdoor temperature sensors) to extremely sensitive information (e.g., video stream from a camera) and needs to be secured over the Internet. Things which utilise cameras as a source of information pertain to a subclass of the IoT called IoVT (internet of video things). This paper presents secured and unsecured video latency measurement results over the Internet for a marine ROV (remotely operated vehicle). A LabVIEW field programmable gate arrays (FPGAs)-based bump-in-the-wire (BITW) secure core is used to provide an AES (advanced encryption standard)-enabled security feature on the video stream of an IoVT node (ROV equipped with a live-feed camera). The designed LabVIEW-based software architecture provides an option to enable/disable the AES encryption for the video transmission. The latency effects of embedding encryption on the stream with real-time constraints are measured and presented. It is found that the encryption mechanism used does not greatly influence the video feedback performance of the observed IoVT node, which is critical for real-time secure video communication for ROV remote control and piloting. The video latency measurement results are taken using 128, 256 and 512 bytes block lengths of AES for both H.264 and MJPEG encoding schemes transmitted over both TCP and UDP transmission protocols. The latency measurement is performed in two scenarios (i.e., with matching equipment and different equipment on either end of the transmission).

Real-Time Underwater StereoFusion.

Many current and future applications of underwater robotics require real-time sensing and interpretation of the environment. As the vast majority of robots are equipped with cameras, computer vision is playing an increasingly important role it this field. This paper presents the implementation and experimental results of underwater StereoFusion, an algorithm for real-time 3D dense reconstruction and camera tracking. Unlike KinectFusion on which it is based, StereoFusion relies on a stereo camera as its main sensor. The algorithm uses the depth map obtained from the stereo camera to incrementally build a volumetric 3D model of the environment, while simultaneously using the model for camera tracking. It has been successfully tested both in a lake and in the ocean, using two different state-of-the-art underwater Remotely Operated Vehicles (ROVs). Ongoing work focuses on applying the same algorithm to acoustic sensors, and on the implementation of a vision based monocular system with the same capabilities.

Collision Detection for Underwater ROV Manipulator Systems.

Work-class ROVs equipped with robotic manipulators are extensively used for subsea intervention operations. Manipulators are teleoperated by human pilots relying on visual feedback from the worksite. Operating in a remote environment, with limited pilot perception and poor visibility, manipulator collisions which may cause significant damage are likely to happen. This paper presents a real-time collision detection algorithm for marine robotic manipulation. The proposed collision detection mechanism is developed, integrated into a commercial ROV manipulator control system, and successfully evaluated in simulations and experimental setup using a real industry standard underwater manipulator. The presented collision sensing solution has a potential to be a useful pilot assisting tool that can reduce the task load, operational time, and costs of subsea inspection, repair, and maintenance operations.

Underwater Depth and Temperature Sensing Based on Fiber Optic Technology for Marine and Fresh Water Applications.

Oceanic conditions play an important role in determining the effects of climate change and these effects can be monitored through the changes in the physical properties of sea water. In fact, Oceanographers use various probes for measuring the properties within the water column. CTDs (Conductivity, Temperature and Depth) provide profiles of physical and chemical parameters of the water column. A CTD device consists of Conductivity (C), Temperature (T) and Depth (D) probes to monitor the water column changes with respect to relative depth. An optical fibre-based point sensor used as a combined pressure (depth) and temperature sensor and the sensor system are described. Measurements accruing from underwater trials of a miniature sensor for pressure (depth) and temperature in the ocean and in fresh water are reported. The sensor exhibits excellent stability and its performance is shown to be comparable with the Sea-Bird Scientific commercial sensor: SBE9Plus.

An Optical Fibre Depth (Pressure) Sensor for Remote Operated Vehicles in Underwater Applications.

A miniature sensor for accurate measurement of pressure (depth) with temperature compensation in the ocean environment is described. The sensor is based on an optical fibre Extrinsic Fabry-Perot interferometer (EFPI) combined with a Fibre Bragg Grating (FBG). The EFPI provides pressure measurements while the Fibre Bragg Grating (FBG) provides temperature measurements. The sensor is mechanically robust, corrosion-resistant and suitable for use in underwater applications. The combined pressure and temperature sensor system was mounted on-board a mini remotely operated underwater vehicle (ROV) in order to monitor the pressure changes at various depths. The reflected optical spectrum from the sensor was monitored online and a pressure or temperature change caused a corresponding observable shift in the received optical spectrum. The sensor exhibited excellent stability when measured over a 2 h period underwater and its performance is compared with a commercially available reference sensor also mounted on the ROV. The measurements illustrates that the EFPI/FBG sensor is more accurate for depth measurements (depth of ~0.020 m).

Secure and Efficient Key Coordination Algorithm for Line Topology Network Maintenance for Use in Maritime Wireless Sensor Networks.

There has been a significant increase in the proliferation and implementation of Wireless Sensor Networks (WSNs) in different disciplines, including the monitoring of maritime environments, healthcare systems, and industrial sectors. It has now become critical to address the security issues of data communication while considering sensor node constraints. There are many proposed schemes, including the scheme being proposed in this paper, to ensure that there is a high level of security in WSNs. This paper presents a symmetric security scheme for a maritime coastal environment monitoring WSN. The scheme provides security for travelling packets via individually encrypted links between authenticated neighbors, thus avoiding a reiteration of a global rekeying process. Furthermore, this scheme proposes a dynamic update key based on a trusted node configuration, called a leader node, which works as a trusted third party. The technique has been implemented in real time on a Waspmote test bed sensor platform and the results from both field testing and indoor bench testing environments are discussed in this paper.