ABSTRACT
The patterning of an acrylamide-based photopolymer surface by holographic recording is studied. The patterns are induced by light alone and no post-processing is required. Periodic surface modulation is observed in addition to a volume phase grating. An investigation has been carried out using white light interferometry into the dependence of the amplitude of the photo induced surface relief modulation on the spatial frequency, intensity of recording and sample thickness. The observed dependencies indicate that the diffusion of material during the holographic recording plays a major role in surface relief formation. The possibility for inscription of surface relief patterns opens the door to at least two new applications for this photopolymer: fabrication of diffractive optical elements and biosensors.
ABSTRACT
A dual in-plane electronic speckle pattern interferometry (ESPI) system has been developed for in situ measurements. The optical setup is described here. The system uses an electro-optical switch to change between the illumination directions for x and y sensitivity. The ability of the electro-optic device to change the polarization of the laser light forms the basis of this switch. The electro-optic device is a liquid-crystal layer cemented between two optically flat glass plates. An electric field can be set up across the layer by application of a voltage to electrodes. The speckle interferometry system incorporates two additional liquid-crystal devices to facilitate phase shifting, and the overall system is controlled by advanced software, which allows switching between the two perpendicular planes in quasi real time. The fact that there are no moving parts is an advantage in any ESPI system for which mechanical stability is vital.
ABSTRACT
Recent research on an acrylamide-based photopolymerizable holographic recording material is presented. The recording characteristics of the material are discussed in detail in terms of sensitivity, diffraction efficiency, recording linearity, resolution limit, and sources of noise. Although the resolution is not sufficient for reflection holography, the recording characteristics are excellent for transmission gratings. The material was found to suffer no shrinkage during recording, and high-diffraction-efficiency slanted gratings were made. Finally, the suitability of this self-developing material to both double-exposure and real-time holographic interferometry is demonstrated.
ABSTRACT
In this Technical Note we present the results when dichromated sugar solutions were used to record interference patterns. Transient behavior was noticed.
