ABSTRACT
Blade tip-timing is an extensively used technique for measuring blade vibrations in turbine and compressor stages; it is one of the preferred techniques used for characterizing their dynamic behaviors using non-contact probes. Typically, arrival time signals are acquired and processed by a dedicated measurement system. Performing a sensitivity analysis on the data processing parameters is essential for the proper design of tip-timing test campaigns. This study proposes a mathematical model for generating synthetic tip-timing signals, descriptive of specific test conditions. The generated signals were used as the controlled input for a thorough characterization of post-processing software for tip-timing analysis. This work represents the first step in quantifying the uncertainty introduced by tip-timing analysis software into user measurements. The proposed methodology can also offer essential information for further sensitivity studies on parameters that influence the accuracy of data analysis during testing.
ABSTRACT
Non-destructive testing for structural health monitoring is becoming progressively important for gas turbine manufacturers. As several techniques for diagnostics and condition-based maintenance have been developed over the years, the tip-timing approach is one of the preferred approaches for characterizing the dynamic behavior of turbine blades using non-contact probes. This experimental work investigates the uncertainty of the time-of-arrival of a Blade Tip-Timing measurement system, a fundamental requirement for numerical and aeromechanical modeling validation. The study is applied to both the measurement setup and the data processing procedure of a generic commercial measurement system. The influence of electronic components and signal processing on the tip-timing uncertainty is determined under different operating conditions.
