Theoretical and Experimental Analyses on the Sound Absorption Coefficient of Rice and Buckwheat Husks Based on Micro-CT Scan Data.

In this study, the sound absorption coefficients of rice and buckwheat husks were estimated. Computed tomography (CT) images were processed to determine the circumference and surface area of voids in the granular material, and the normal incident sound absorption coefficients were derived. In addition, the tortuosity, which expresses the complexity of the sound wave propagation through the structure, was measured for each material. The theoretical sound absorption coefficients were then compared to the measured sound absorption coefficients with and without consideration of the tortuosity. A correction factor was used to bring the surface area of the granular material closer to the actual surface area and observed that the tortuosity obtained theoretical values that matched the trend of the measured values. These results indicate that using CT images to estimate the sound absorption coefficient is a viable approach.

Mathematical Models and Experiments on the Acoustic Properties of Granular Packing Structures (Measurement of Tortuosity in Hexagonal Close-Packed and Face-Centered Cubic Lattices).

In this study, the sound absorption characteristics of hexagonal close-packed and face-centered cubic lattices were estimated by theoretical analysis. Propagation constants and characteristic impedances were obtained by dividing each structure into elements perpendicular to the incident direction of sound waves and by approximating each element to a clearance between two parallel planes. Consequently, the propagation constant and the characteristic impedance were treated as a one-dimensional transfer matrix in the propagation of sound waves, and the normal incident sound absorption coefficient was calculated by the transfer matrix method. The theoretical value of the sound absorption coefficient was derived by using the effective density applied to the measured tortuosity. As a result, the theoretical value was becoming closer to the measured value. Therefore, the measured tortuosity is reasonable.

Cyclic Hypervalent Iodine-Induced Oxidative Phenol and Aniline Couplings with Phenothiazines.

C-H/N-H bond functionalization for direct intermolecular aryl C-N couplings is a useful synthetic process. In this study, we achieved metal-free cross-dehydrogenative coupling of phenols and anilines with phenothiazines using hypervalent iodine reagents. This method affords selective amination products under mild conditions. Electron-rich phenols and anilines could be employed, affording moderate-to-high yields of N-arylphenothiazines. Aniline amination proceeded efficiently at 20 °C, a previously unreported phenomenon.

Addition of Two Substantial Side-Branch Silencers to the Interference Silencer by Incorporating a Zero-Mass Metamaterial.

Zero-mass metamaterials comprise an orifice and a thin film. The resonance between the film and the air mass of the orifice hole is caused by sound waves, which significantly decreases the transmission loss at a specific frequency. The study novelly incorporates acoustic metamaterials in the delay tube of an interference silencer. In this case, it is determined that an interference silencer and a "side-branch silencer with two different branch pipe lengths" can be realized in a single silencer. At certain frequencies, the acoustic mass of the acoustic metamaterial approaches zero, which results in an interference silencer with the full length of the delay tube applied. At other frequencies, the acoustic metamaterial acts as a rigid wall with high transmission loss, thereby reflecting sound waves at the zero-mass metamaterial location. In this case, it is a side-branch silencer with two different tube lengths, corresponding to the tube lengths from the entrance and exit of the delay tube to the zero-mass metamaterial, respectively. The incorporation of zero-mass metamaterial into an interference-type silencer can introduce the silencing effect of a side-branch silencer with two different branch tube lengths without increasing the volume of the interference-type silencer. Theoretical values were obtained using the transfer matrix. Consequently, the theoretical and experimental values were close, enabling us to predict the transmission loss of the proposed silencer.

Estimation of the Acoustic Properties of the Random Packing Structures of Granular Materials: Estimation of the Sound Absorption Coefficient Based on Micro-CT Scan Data.

In this study, the sound absorption properties of randomly packed granular materials were estimated. Generally, it is difficult to construct a general mathematical model for the arrangement of randomly packed granular materials. Therefore, in this study, an attempt was made to estimate the sound absorption coefficient using a theoretical analysis by introducing data from computed tomography (CT) scans, as the tomographic images of CT scans correspond to the slicing and elemental division of packing structures. In the theoretical analysis, the propagation constants and characteristic impedances in the voids were obtained by approximating each tomographic image as a void between two parallel planes. The derived propagation constants and characteristic impedances were then treated as a one-dimensional transfer matrix in the propagation of sound waves, and the transfer matrix method was used to calculate the normal incident sound absorption coefficient. The theoretical value of the sound absorption coefficient was derived using the effective density to which the measured tortuosity was applied. As a result, for the theoretical values considering the tortuosity, in many cases, the theoretical values were close to the measured values. For the theoretical values, when both the surface area and tortuosity were considered, the peak sound absorption frequency moved to a lower frequency and was in general agreement with the measured values.