ABSTRACT
We report on a continuous wave (CW) and Kerr-lens mode-locked (KLM) Tm3+:YScO3 single-crystal laser centered at 2.1 µm. Efficient CW laser operation with a maximum slope efficiency of 51% was achieved under in-band pumping by an Er:Yb fiber master oscillator power amplifier (MOPA). In KLM operation, pulses as short as 49 fs corresponding to seven optical cycles were achieved at a repetition rate of 96.7â MHz with an average output power of 126â mW. Such short pulse durations are enabled by the inhomogeneously broadened emission spectrum of Tm3+:YScO3 extending to above 2200â nm.
ABSTRACT
We report on growth, temperature-dependent spectroscopy, and laser experiments of Tm3+-doped YScO3 mixed sesquioxide crystals. For the first time, cm3-scale laser quality Tm3+:YScO3 crystals with 2.2 at.% and 3.1 at.% doping levels were grown by the Czochralski method from iridium crucibles. We reveal that the structural disorder in the mixed crystals allows for broad and smooth spectral features even at cryogenic temperatures. We obtained the first continuous wave laser operation in this material at wavelengths around 2100 nm using a laser diode emitting at 780 nm as a pump source. A maximum slope efficiency of 45% was achieved using a Tm3 + (3.1 at.%):YScO3 crystal. Our findings demonstrate the high potential of Tm3+-doped mixed sesquioxides for efficient ultrafast pulse generation in the 2.1 µm range.
ABSTRACT
We present a combined gain media Kerr-lens mode-locked laser based on a Tm:Lu2O3 ceramic and a Tm:Sc2O3 single crystal. Pulses as short as 41 fs, corresponding to less than 6 optical cycles, were obtained with an average output power of 42 mW at a wavelength of 2.1 µm and a repetition rate of 93.3 MHz. Furthermore, a maximum average power of 316 mW with a pulse duration of 73 fs was achieved.
ABSTRACT
We demonstrated an all-normal-dispersion nonlinear polarization rotation mode-locked Tm:ZBLAN fiber laser in the 2 µm wavelength band. All fibers in the experiment were ZBLAN fibers with normal dispersion in the wavelength band. An average power of 63 mW with a characteristic cat-ear shaped optical spectrum of an ANDi laser was obtained. The center wavelength and the spectral bandwidth were 1880 nm and ~80 nm, respectively. The repetition rate was 70.6 MHz and the corresponding pulse energy was 0.9 nJ. The pulse duration directly from the oscillator was 860 fs and it was compressed to 107 fs.
ABSTRACT
Q-switched pulse laser generation is successfully demonstrated in both Erbium-doped fibre laser (EDFL) and Thulium-doped fibre laser (TDFL) cavities by employing Nickel disulfide (NiS2) as a saturable absorber (SA). Q-switched pulse laser operation at 1.55 µm and 2.0 µm is obtained at low pump power levels of 37 mW and 48 mW, respectively. For the EDFL, stable passively Q-switched laser output at a wavelength of 1561.86 nm is achieved, with a minimum pulse duration of 237 ns and a repetition rate of 243.9 kHz. For the TDFL, the centre wavelength of the laser output is 1915.5 nm, with a minimum pulse duration of 505 ns and a repetition rate of 214.68 kHz. NiS2 is used as SA for Q-switched laser generation over a broadband wavelength for the first time.
ABSTRACT
We demonstrate a Kerr-lens mode-locked Tm3+:Sc2O3 single-crystal laser in-band pumped by an Er3+:Yb3+ fiber master oscillator power amplifier at 1611 nm. Pulses as short as 166 fs with an average output power of 440 mW are obtained. The spectral bandwidth and center wavelength are 29.3 and 2124 nm, respectively. At a longer pulse duration of 298 fs, we obtain 1 W of average output power. The repetition rate is 95 MHz, and the conversion efficiency against the absorbed pump power is as high as 47%. To the best of our knowledge, this is the first Kerr-lens mode-locked Tm3+-doped solid state laser.
ABSTRACT
We developed a narrow-linewidth linearly-polarized all-PM-fiber MOPA at the wavelength of 1610 nm. The MOPA consists of a DFB laser diode seed source and three amplifier stages with three different gain fibers. The first amplifier stage employed an Er doped fiber and the second and third amplifier stages employed Er:Yb co-doped fibers. The maximum output power was 8 W. Linewidth of 25 MHz and polarization extinction ratio of 28 dB was obtained. At the maximum output power, no ASE component around 1.55 µm or 1µm was observed.
ABSTRACT
We report on a tunable noise-like pulse (NLP) generation in a mode-locked Tm fiber laser with a SESAM. A tuning range of 1895-1942 nm, while keeping the spectral bandwidth of 10-19 nm under NLP mode-locked operation, was obtained by a tunable filter based on chromatic dispersion of telescope lenses. At the center wavelength of 1928 nm, the maximum output power of 195 mW with the spectral bandwidth of 18.9 nm was obtained. The repetition rate was 20.5 MHz and the corresponding pulse energy was 9.5 nJ. To our knowledge, this is the first report of a tunable NLP mode-locked laser based on chromatic dispersion of a lens system.
ABSTRACT
Numerical analysis of fast saturable absorber mode-locked Yb(3+)-doped solid state lasers is reported. The analysis includes a special case in which the spectral bandwidth of the short pulse is larger than the fluorescence bandwidth of the gain material. The relationship between the available shortest pulse duration and modulation depth for a standard bulk and thin disk laser geometries with several gain materials are shown. The characteristic phenomena observed in our previous Kerr-lens mode-locked laser experiments were reproduced in the simulation.
ABSTRACT
CW and mode-locked laser operation based on an Yb3+:Y2O3 ceramic thin disk is reported. In CW laser operation, an output power of 70 W with an optical-to-optical efficiency of 57.4% was achieved. A higher slope efficiency of 70% was also obtained with a 50-W pump laser diode with more suitable emission characteristics. In mode-locked laser operation, pulses as short as 547 fs with an average power of 7.4 W were obtained. To our knowledge, this is the first demonstration of a high power CW and mode-locked laser operation based on Yb3+:Y2O3 ceramic thin disks.
ABSTRACT
Diode-pumped mode-locked laser operation based on Yb(3+):Sc(2)O(3) and Yb(3+):Y(2)O(3) multi-gain-media oscillator has been demonstrated. 66-fs pulse duration with an average power of 1.5 W and 53-fs pulse duration with an average power of 1 W under 8-W laser diode pumping were achieved. The optical-to-optical efficiency was 18.8%. Additionally, 68-fs pulse duration with an average power of 540 mW from Yb(3+):Y(2)O(3) ceramic was also obtained.
ABSTRACT
Diode-pumped Kerr-lens mode-locked laser operation of Yb(3+):Lu(2)O(3) and nondoped Y(2)O(3) combined ceramics has been achieved; 65 fs pulses with an average power of 320 mW under 5 W of pump power were obtained at the center wavelength of 1032 nm. The spectral bandwidth and the time bandwidth product were 18.9 and 0.345 nm, respectively. To our knowledge, this is the first demonstration of a Kerr-lens mode-locked laser operation based on Yb(3+):Lu(2)O(3) ceramic.
ABSTRACT
Diode-pumped Kerr-lens mode-locked laser operations of Yb3+:Sc2O3 ceramics have been achieved. 92 fs pulses with the average power of 850 mW under 3.89 W incident pump power were obtained at a center wavelength of 1042 nm. The optical-to-optical efficiency was 21.9%. 90 fs pulses with the average power of 160 mW were also obtained at a center wavelength of 1092 nm. To our knowledge, this is the first demonstration of a Kerr-lens mode-locked Yb3+:Sc2O3 laser.
