Using Bulky Dodecaborane-Based Dopants to Produce Mobile Charge Carriers in Amorphous Semiconducting Polymers.

Conjugated polymers are a versatile class of electronic materials featured in a variety of next-generation electronic devices. The utility of such polymers is contingent in large part on their electrical conductivity, which depends both on the density of charge carriers (polarons) and on the carrier mobility. Carrier mobility, in turn, is largely controlled by the separation between the polarons and dopant counterions, as counterions can produce Coulombic traps. In previous work, we showed that large dopants based on dodecaborane (DDB) clusters were able to reduce Coulombic binding and thus increase carrier mobility in regioregular (RR) poly(3-hexylthiophene-2,5-diyl) (P3HT). Here, we use a DDB-based dopant to study the effects of polaron-counterion separation in chemically doped regiorandom (RRa) P3HT, which is highly amorphous. X-ray scattering shows that the DDB dopants, despite their large size, can partially order the RRa P3HT during doping and produce a doped polymer crystal structure similar to that of DDB-doped RR P3HT; Alternating Field (AC) Hall measurements also confirm a similar hole mobility. We also show that use of the large DDB dopants successfully reduces Coulombic binding of polarons and counterions in amorphous polymer regions, resulting in a 77% doping efficiency in RRa P3HT films. The DDB dopants are able to produce RRa P3HT films with a 4.92 S/cm conductivity, a value that is ∼200× higher than that achieved with 3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), the traditional dopant molecule. These results show that tailoring dopants to produce mobile carriers in both the amorphous and semicrystalline regions of conjugated polymers is an effective strategy for increasing achievable polymer conductivities, particularly in low-cost polymers with random regiochemistry. The results also emphasize the importance of dopant size and shape for producing Coulombically unbound, mobile polarons capable of electrical conduction in less-ordered materials.

Measuring Heat Dissipation and Entropic Potential in Battery Cathodes Made with Conjugated and Conventional Polymer Binders Using Operando Calorimetry.

This study explores the influence of electronic and ionic conductivities on the behavior of conjugated polymer binders through the measurement of entropic potential and heat generation in an operating lithium-ion battery. Specifically, the traditional poly(vinylidene fluoride) (PVDF) binder in LiNi0.8Co0.15Al0.05O2 (NCA) cathode electrodes was replaced with semiconducting polymer binders based on poly(3,4-propylenedioxythiophene). Two conjugated polymers were explored: one is a homopolymer with all aliphatic side chains, and the other is a copolymer with both aliphatic and ethylene oxide side chains. We have shown previously that both polymers have high electronic conductivity in the potential range of NCA redox, but the copolymer has a higher ionic conductivity and a slightly lower electronic conductivity. Entropic potential measurements during battery cycling revealed consistent trends during delithiation for all of the binders, indicating that the binders did not modify the expected NCA solid solution deintercalation process. The entropic signature of polymer doping to form the conductive state could be clearly observed at potentials below NCA oxidation, however. Operando isothermal calorimetric measurements showed that the conductive binders resulted in less Joule heating compared to PVDF and that the net electrical energy was entirely dissipated as heat. In a comparison of the two conjugated polymer binders, the heat dissipation was lower for the homopolymer binder at lower C-rates, suggesting that electronic conductivity rather than ionic conductivity was the most important for reducing Joule heating at lower rates, but that ionic conductivity became more important at higher rates.

High-pressure studies of size dependent yield strength in rhenium diboride nanocrystals.

The superhard ReB2 system is the hardest pure phase diboride synthesized to date. Previously, we have demonstrated the synthesis of nano-ReB2 and the use of this nanostructured material for texture analysis using high-pressure radial diffraction. Here, we investigate the size dependence of hardness in the nano-ReB2 system using nanocrystalline ReB2 with a range of grain sizes (20-60 nm). Using high-pressure X-ray diffraction, we characterize the mechanical properties of these materials, including bulk modulus, lattice strain, yield strength, and texture. In agreement with the Hall-Petch effect, the yield strength increases with decreasing size, with the 20 nm ReB2 exhibiting a significantly higher yield strength than any of the larger grained materials or bulk ReB2. Texture analysis on the high pressure diffraction data shows a maximum along the [0001] direction, which indicates that plastic deformation is primarily controlled by the basal slip system. At the highest pressure (55 GPa), the 20 nm ReB2 shows suppression of other slip systems observed in larger ReB2 samples, in agreement with its high yield strength. This behavior, likely arises from an increased grain boundary concentration in the smaller nanoparticles. Overall, these results highlight that even superhard materials can be made more mechanically robust using nanoscale grain size effects.

Establishing reaction networks in the 16-electron sulfur reduction reaction.

The sulfur reduction reaction (SRR) plays a central role in high-capacity lithium sulfur (Li-S) batteries. The SRR involves an intricate, 16-electron conversion process featuring multiple lithium polysulfide intermediates and reaction branches1-3. Establishing the complex reaction network is essential for rational tailoring of the SRR for improved Li-S batteries, but represents a daunting challenge4-6. Herein we systematically investigate the electrocatalytic SRR to decipher its network using the nitrogen, sulfur, dual-doped holey graphene framework as a model electrode to understand the role of electrocatalysts in acceleration of conversion kinetics. Combining cyclic voltammetry, in situ Raman spectroscopy and density functional theory calculations, we identify and directly profile the key intermediates (S8, Li2S8, Li2S6, Li2S4 and Li2S) at varying potentials and elucidate their conversion pathways. Li2S4 and Li2S6 were predominantly observed, in which Li2S4 represents the key electrochemical intermediate dictating the overall SRR kinetics. Li2S6, generated (consumed) through a comproportionation (disproportionation) reaction, does not directly participate in electrochemical reactions but significantly contributes to the polysulfide shuttling process. We found that the nitrogen, sulfur dual-doped holey graphene framework catalyst could help accelerate polysulfide conversion kinetics, leading to faster depletion of soluble lithium polysulfides at higher potential and hence mitigating the polysulfide shuttling effect and boosting output potential. These results highlight the electrocatalytic approach as a promising strategy for tackling the fundamental challenges regarding Li-S batteries.

Understanding How the Suppression of Insertion-Induced Phase Transitions Leads to Fast Charging in Nanoscale LixMoO2.

Fast-charging Li-ion batteries are technologically important for the electrification of transportation and the implementation of grid-scale storage, and additional fundamental understanding of high-rate insertion reactions is necessary to overcome current rate limitations. In particular, phase transformations during ion insertion have been hypothesized to slow charging. Nanoscale materials with modified transformation behavior often show much faster kinetics, but the mechanism for these changes and their specific contribution to fast-charging remain poorly understood. In this work, we combine operando synchrotron X-ray diffraction with electrochemical kinetics analyses to illustrate how nanoscale crystal size leads to suppression of first-order insertion-induced phase transitions and their negative kinetic effects in MoO2, a tunnel structure host material. In electrodes made with micrometer-scale particles, large first-order phase transitions during cycling lower capacity, slow charge storage, and decrease cycle life. In medium-sized nanoporous MoO2, the phase transitions remain first-order, but show a considerably smaller miscibility gap and shorter two-phase coexistence region. Finally, in small MoO2 nanocrystals, the structural evolution during lithiation becomes entirely single-phase/solid-solution. For all nanostructured materials, the changes to the phase transition dynamics lead to dramatic improvements in capacity, rate capability, and cycle life. This work highlights the continuous evolution from a kinetically hindered battery material in bulk form to a fast-charging, pseudocapacitive material through nanoscale size effects. As such, it provides key insight into how phase transitions can be effectively controlled using nanoscale size and emphasizes the importance of these structural dynamics to the fast rate capability observed in nanostructured electrode materials.

Vertex Differentiation Strategy for Tuning the Physical Properties of closo-Dodecaborate Weakly Coordinating Anions.

We report the synthesis and characterization of various compounds containing the 1,7,9-hydroxylated closo-dodecahydrododecaborate (B12H9(OH)32-) cluster motif. Specifically, we show how the parent compound can be synthesized on the multigram scale and further perhalogenated, leading to a new class of vertex-differentiated weakly coordinating anions. We show that a postmodification of the hydroxyl groups by alkylation affords further opportunities for tailoring these anions' stability, steric bulk, and solubility properties. The resulting dodecaborate-based salts were subjected to a full thermal and electrochemical stability evaluation, showing that many of these anions maintain thermal stability up to 500 °C and feature no redox activity below ∼1 V vs Fc/Fc+. Mixed hydroxylated/halogenated clusters show enhanced solubility compared to their purely halogenated analogs and retain weakly coordinating properties in the solid state, as demonstrated by ionic conductivity measurements of their Li+ salts.

In-Situ Measurement of Magnetoelectric Coupling and Strain Transfer in Multiferroic Nanocomposites of CoFe2O4 and Hf0.5Zr0.5O2 with Residual Porosity.

With increasing applications for voltage-controlled magnetism, the need to more fully understand magnetoelectric coupling and strain transfer in nanostructured multiferroic composites has also increased. Here, multiferroic nanocomposites were synthesized using block copolymer templating to create mesoporous cobalt ferrite (CFO), followed by partly filling the pores with ferroelectric zirconium-substituted hafnia (HZO) using atomic layer deposition (ALD) to produce a porous multiferroic composite with enhanced mechanical flexibility. Upon electrical poling of the nanocomposite, we observed large changes in the magnetization. These changes partly relaxed upon removing the electric field, suggesting a strain-mediated mechanism. Both the anisotropic strain transfer from HZO to CFO and the strain relaxation after the field was removed were confirmed using high-resolution X-ray diffraction measurements collected during in-situ poling. The in-situ observation of both anisotropic strain transfer and large magnetization changes allows us to directly characterize the strong multiferroic coupling that can occur in flexible, nanostructured composites.

A direct and clean route to MXenes.

New, scalable methods synthesize two-dimensional carbide and nitride materials.

Using small angle x-ray scattering to examine the aggregation mechanism in silica nanoparticle-based ambigels for improved optical clarity.

Silica-based aerogels are a promising low-cost solution for improving the insulation efficiency of single-pane windows and reducing the energy consumption required for space heating and cooling. Two key material properties required are high porosity and small pore sizes, which lead to low thermal conductivity and high optical transparency, respectively. However, porosity and pore size are generally directly linked, where high porosity materials also have large pore sizes. This is unfavorable as large pores scatter light, resulting in reduced transmittance in the visible regime. In this work, we utilized preformed silica colloids to explore methods for reducing pore size while maintaining high porosity. The use of preformed colloids allows us to isolate the effect of solution conditions on porous gel network formation by eliminating simultaneous nanoparticle growth and aggregation found when using typical sol-gel molecular-based silica precursors. Specifically, we used in situ synchrotron-based small-angle x-ray scattering during gel formation to better understand how pH, concentration, and colloid size affect particle aggregation and pore structure. Ex situ characterization of dried gels demonstrates that peak pore widths can be reduced from 15 to 13 nm, accompanied by a narrowing of the overall pore size distribution, while maintaining porosities of 70%-80%. Optical transparency is found to increase with decreasing pore sizes while low thermal conductivities ranging from 95 +/- 13 mW/m K are maintained. Mechanical performance was found to depend primarily on effective density and did not show a significant dependence on solution conditions. Overall, our results provide insights into methods to preserve high porosity in nanoparticle-based aerogels while improving optical transparency.

Molecular Dynamics Study of the Thermodynamics of Integer Charge Transfer vs Charge-Transfer Complex Formation in Doped Conjugated Polymers.

Molecular dopants such as 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) can interact with conjugated polymers such as poly(3-hexylthiophene-2,5-diyl) (P3HT) in two different ways: they can undergo integer charge transfer (ICT) or they can form a partial-charge-transfer complex (CTC). Both are seen experimentally, but the CTC has been challenging to characterize, making it difficult to answer questions such as the following. Which polymorph is more stable? Do they have similar barriers for formation? Is there a thermodynamic route to convert one to the other? Here, we study the structure and the thermodynamics of bulk F4TCNQ-doped P3HT with all-atom molecular dynamics simulations, using thermodynamic integration to calculate the relative free energies. We find that the ICT and CTC polymorphs have similar thermodynamic stabilities. The barrier to create the ICT polymorph, however, is lower than that to make the CTC polymorph, because the ICT polymorph has a small critical nucleus, but the critical nucleus for the CTC polymorph is larger than what we can simulate. Moreover, simulated thermal annealing shows that the activation barrier for converting the CTC polymorph to the ICT polymorph is relatively modest. Overall, the simulations explain both the observed structures and the thermodynamics of F4TCNQ-doped P3HT and offer guidelines for targeting the production of a desired polymorph for different applications.

Tuning Exchange Coupling in a New Family of Nanocrystal-Based Granular Multiferroics Using an Applied Electric Field.

In this work, we demonstrate an experimental realization of a granular multiferroic composite, where the magnetic state of a nanocrystal array is modified by tuning the interparticle exchange coupling using an applied electric field. Previous theoretical models of a granular multiferroic composite predicted a unique magnetoelectric coupling mechanism, in which the magnetic spins of the ensemble are governed by interparticle exchange. The extent of these exchange interactions can be controlled by varying the local dielectric environment between grains. We specifically utilize the strong dielectric dependence of ferroelectric materials to modify the interparticle coupling of closely spaced magnetic nanoparticles using either a change in temperature or an electric field. This coupling modifies the ensemble magnetic coercivity and thus the superparamagnetic-to-ferromagnetic phase transition temperature. Through the use of two different ferroelectrics, our results suggest that this magnetoelectric coupling mechanism could be generalized as a new class of multiferroic material, applicable to a broad range of ferroelectric/magnetic nanocrystal composites.

Transparent silica aerogel slabs synthesized from nanoparticle colloidal suspensions at near ambient conditions on omniphobic liquid substrates.

This paper presents a novel sol-gel method to synthesize large and thick silica aerogel monoliths at near ambient conditions using a commercial aqueous solution of colloidal silica nanoparticles as building blocks. To achieve slabs with high visible transmittance and low thermal conductivity, the method combines the strategies of (i) synthesizing gels on an omniphobic perfluorocarbon liquid substrate, (ii) aging at temperatures above room temperature, and (iii) performing solvent exchange with a low-surface-tension organic solvent prior to ambient drying. The omniphobic liquid substrates were used to prevent cracking and ensure an optically-smooth surface, while nanoparticle building blocks were small (<10 nm) to limit volumetric light scattering. Gels were aged at temperatures between 25 and 80 °C for up to 21 days to make them stronger and stiffer and to reduce shrinkage and cracking during ambient drying. Ambient drying was achieved by first exchanging water in the gel pores for octane, followed by drying in an octane-rich atmosphere to decrease capillary forces. The synthesized nanoparticle-based silica aerogel monoliths had thicknesses up to 5 mm, diameters up to 10 cm, porosities exceeding 80%, and thermal conductivities as low as 0.08 W m-1 K-1. Notably, the slabs featured visible transmittance exceeding 75% even for slabs as thick as 5 mm. The as-synthesized aerogel monoliths were exposed to TMCS vapor to induce hydrophobic properties resulting in a water contact angle of 140° that prevented water infiltration into the pores and protected the aerogels from water damage. This simple synthesis route conducted at near ambient conditions produces hydrophobic aerogel monoliths with promising optically transparent and thermally insulating properties that can be adhered to glass panes for window insulation and solar-thermal energy conversion applications.

Seeded-Growth Experiment Demonstrating Size- and Shape-Dependence on Gold Nanoparticle-Light Interactions.

Gold nanoparticles are exciting materials in nanotechnology and nanoscience research and are being applied across a wide range of fields including imaging, chemical sensing, energy storage, and cancer therapies. In this experiment, students will synthesize two sizes of gold nanospheres (~20 nm and ~100 nm) and will create gold nanostars utilizing a seed-mediated growth synthetic approach. Students will compare how each sample interacts differently with light (absorption and scattering) based on the nanoparticles' size and shape. This experiment is ideal for high-school and early undergraduate students since all reagents are non-toxic, affordable, and no special characterization equipment is required.

Driving Force and Optical Signatures of Bipolaron Formation in Chemically Doped Conjugated Polymers.

Molecular dopants are often added to semiconducting polymers to improve electrical conductivity. However, the use of such dopants does not always produce mobile charge carriers. In this work, ultrafast spectroscopy is used to explore the nature of the carriers created following doping of conjugated push-pull polymers with both F4 TCNQ (2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) and FeCl3 . It is shown that for one particular push-pull material, the charge carriers created by doping are entirely non-conductive bipolarons and not single polarons, and that transient absorption spectroscopy following excitation in the infrared can readily distinguish the two types of charge carriers. Based on density functional theory calculations and experiments on multiple push-pull conjugated polymers, it is argued that the size of the donor push units determines the relative stabilities of polarons and bipolarons, with larger donor units stabilizing the bipolarons by providing more area for two charges to co-reside.

Understanding Stabilization in Nanoporous Intermetallic Alloy Anodes for Li-Ion Batteries Using Operando Transmission X-ray Microscopy.

Tin-based alloying anodes are exciting due to their high energy density. Unfortunately, these materials pulverize after repetitive cycling due to the large volume expansion during lithiation and delithiation; both nanostructuring and intermetallic formation can help alleviate this structural damage. Here, these ideas are combined in nanoporous antimony-tin (NP-SbSn) powders, synthesized by a simple and scalable selective-etching method. The NP-SbSn exhibits bimodal porosity that facilitates electrolyte diffusion; those void spaces, combined with the presence of two metals that alloy with lithium at different potentials, further provide a buffer against volume change. This stabilizes the structure to give NP-SbSn good cycle life (595 mAh/g after 100 cycles with 93% capacity retention). Operando transmission X-ray microscopy (TXM) showed that during cycling NP-SbSn expands by only 60% in area and then contracts back nearly to its original size with no physical disintegration. The pores shrink during lithiation as the pore walls expand into the pore space and then relax back to their initial size during delithiation with almost no degradation. Importantly, the pores remained open even in the fully lithiated state, and structures are in good physical condition after the 36th cycle. The results of this work should thus be useful for designing nanoscale structures in alloying anodes.

Fjord-Edge Graphene Nanoribbons with Site-Specific Nitrogen Substitution.

The synthesis of graphene nanoribbons (GNRs) that contain site-specifically substituted backbone heteroatoms is one of the essential goals that must be achieved in order to control the electronic properties of these next generation organic materials. We have exploited our recently reported solid-state topochemical polymerization/cyclization-aromatization strategy to convert the simple 1,4-bis(3-pyridyl)butadiynes 3a,b into the fjord-edge nitrogen-doped graphene nanoribbon structures 1a,b (fjord-edge N2[8]GNRs). Structural assignments are confirmed by CP/MAS 13C NMR, Raman, and XPS spectroscopy. The fjord-edge N2[8]GNRs 1a,b are promising precursors for the novel backbone nitrogen-substituted N2[8]AGNRs 2a,b. Geometry and band calculations on N2[8]AGNR 2c indicate that this class of nanoribbons should have unusual bonding topology and metallicity.

Tunable Dopants with Intrinsic Counterion Separation Reveal the Effects of Electron Affinity on Dopant Intercalation and Free Carrier Production in Sequentially Doped Conjugated Polymer Films.

Carrier mobility in doped conjugated polymers is limited by Coulomb interactions with dopant counterions. This complicates studying the effect of the dopant's oxidation potential on carrier generation because different dopants have different Coulomb interactions with polarons on the polymer backbone. Here, dodecaborane (DDB)-based dopants are used, which electrostatically shield counterions from carriers and have tunable redox potentials at constant size and shape. DDB dopants produce mobile carriers due to spatial separation of the counterion, and those with greater energetic offsets produce more carriers. Neutron reflectometry indicates that dopant infiltration into conjugated polymer films is redox-potential-driven. Remarkably, X-ray scattering shows that despite their large 2-nm size, DDBs intercalate into the crystalline polymer lamellae like small molecules, indicating that this is the preferred location for dopants of any size. These findings elucidate why doping conjugated polymers usually produces integer, rather than partial charge transfer: dopant counterions effectively intercalate into the lamellae, far from the polarons on the polymer backbone. Finally, it is shown that the IR spectrum provides a simple way to determine polaron mobility. Overall, higher oxidation potentials lead to higher doping efficiencies, with values reaching 100% for driving forces sufficient to dope poorly crystalline regions of the film.

Fast-Charging Cathodes from Polymer-Templated Mesoporous LiVPO4F.

Fast-charging cathodes with high operating voltages are critical to the development of high energy and power density lithium-ion batteries. One route to fast-charging battery materials is through the formation of nanoporous networks, but these methods are often limited by the high calcination temperatures required for synthesis. Here, we report the synthesis of carbon-coated nanoporous LiVPO4F with excellent rate capabilities that can be stably cycled up to 4.6 V in standard LiPF6 electrolytes. During charge and discharge at 30C, 110 mAh/g (70% of theoretical capacity) was obtained, and only 9% of capacity was lost after 2000 cycles at 20C. These materials also showed excellent stability, with little self-discharge, an open-circuit voltage of 4.2 V, and a discharge capacity of 139 mAh/g obtained after holding for 12 h. Rate capabilities were further demonstrated in a proof-of-concept full cell made with a nanostructured Nb2O5. These devices were able to deliver 200 mAh/g at 1C and 100 mAh/g at 30C. Finally, operando X-ray diffraction and electrochemical kinetics were further used to provide insight into the nature of fast charging in these materials.

Controlling Thermal Conductivity in Mesoporous Silica Films Using Pore Size and Nanoscale Architecture.

This work investigates the effect of wall thickness on the thermal conductivity of mesoporous silica materials made from different precursors. Sol-gel- and nanoparticle-based mesoporous silica films were synthesized by evaporation-induced self-assembly using either tetraethyl orthosilicate or premade silica nanoparticles. Since wall thickness and pore size are correlated, a variety of polymer templates were used to achieve pore sizes ranging from 3-23 nm for sol-gel-based materials and 10-70 nm for nanoparticle-based materials. We found that the type of nanoscale precursor determines how changing the wall thickness affects the resulting thermal conductivity. The data indicate that the thermal conductivity of sol-gel-derived porous silica decreased with decreasing wall thickness, while for nanoparticle-based mesoporous silica, the wall thickness had little effect on the thermal conductivity. This work expands our understanding of heat transfer at the nanoscale and opens opportunities for tailoring the thermal conductivity of nanostructured materials by means other than porosity and composition.

Synthesis and High-Pressure Mechanical Properties of Superhard Rhenium/Tungsten Diboride Nanocrystals.

Rhenium diboride is an established superhard compound that can scratch diamond and can be readily synthesized under ambient pressure. Here, we demonstrate two synergistic ways to further enhance the already high yield strength of ReB2. The first approach builds on previous reports where tungsten is doped into ReB2 at concentrations up to 48 at. %, forming a rhenium/tungsten diboride solid solution (Re0.52W0.48B2). In the second approach, the composition of both materials is maintained, but the particle size is reduced to the nanoscale (40-150 nm). Bulk samples were synthesized by arc melting above 2500 °C, and salt flux growth at ∼850 °C was used to create nanoscale materials. In situ radial X-ray diffraction was then performed under high pressures up to ∼60 GPa in a diamond anvil cell to study mechanical properties including bulk modulus, lattice strain, and strength anisotropy. The differential stress for both Re0.52W0.48B2 and nano ReB2 (n-ReB2) was increased compared to bulk ReB2. In addition, the lattice-preferred orientation of n-ReB2 was experimentally measured. Under non-hydrostatic compression, n-ReB2 exhibits texture characterized by a maximum along the [001] direction, confirming that plastic deformation is primarily controlled by the basal slip system. At higher pressures, a range of other slip systems become active. Finally, both size and solid-solution effects were combined in nanoscale Re0.52W0.48B2. This material showed the highest differential stress and bulk modulus, combined with suppression of the new slip planes that opened at high pressure in n-ReB2.