Castellated tiles as the beam-facing components for the diagnostic calorimeter of the negative ion source SPIDER.

This paper presents the results of numerical simulations and experimental tests carried out to assess the feasibility and suitability of graphite castellated tiles as beam-facing component in the diagnostic calorimeter of the negative ion source SPIDER (Source for Production of Ions of Deuterium Extracted from Radio frequency plasma). The results indicate that this concept could be a reliable, although less performing, alternative for the present design based on carbon fiber composite tiles, as it provides thermal measurements on the required spatial scale.

High energy flux thermo-mechanical test of 1D-carbon-carbon fibre composite prototypes for the SPIDER diagnostic calorimeter.

Operation of the thermonuclear fusion experiment ITER requires additional heating via injection of neutral beams from accelerated negative ions. In the SPIDER test facility, under construction in Padova, the production of negative ions will be studied and optimised. STRIKE (Short-Time Retractable Instrumented Kalorimeter Experiment) is a diagnostic used to characterise the SPIDER beam during short pulse operation (several seconds) to verify if the beam meets the ITER requirements about the maximum allowed beam non-uniformity (below ±10%). The major components of STRIKE are 16 1D-CFC (Carbon-Carbon Fibre Composite) tiles, observed at the rear side by a thermal camera. This contribution gives an overview of some tests under high energy particle flux, aimed at verifying the thermo-mechanical behaviour of several CFC prototype tiles. The tests were performed in the GLADIS facility at IPP (Max-Plank-Institut für Plasmaphysik), Garching. Dedicated linear and nonlinear simulations were carried out to interpret the experiments and a comparison of the experimental data with the simulation results is presented. The results of some morphological and structural studies on the material after exposure to the GLADIS beam are also given.

A neutron diagnostic for high current deuterium beams.

A neutron diagnostic for high current deuterium beams is proposed for installation on the spectral shear interferometry for direct electric field reconstruction (SPIDER, Source for Production of Ion of Deuterium Extracted from RF plasma) test beam facility. The proposed detection system is called Close-contact Neutron Emission Surface Mapping (CNESM). The diagnostic aims at providing the map of the neutron emission on the beam dump surface by placing a detector in close contact, right behind the dump. CNESM uses gas electron multiplier detectors equipped with a cathode that also serves as neutron-proton converter foil. The cathode is made of a thin polythene film and an aluminium film; it is designed for detection of neutrons of energy >2.2 MeV with an incidence angle < 45°. CNESM was designed on the basis of simulations of the different steps from the deuteron beam interaction with the beam dump to the neutron detection in the nGEM. Neutron scattering was simulated with the MCNPX code. CNESM on SPIDER is a first step towards the application of this diagnostic technique to the MITICA beam test facility, where it will be used to resolve the horizontal profile of the beam intensity.

Design and specifications of the diagnostics for the instrumented calorimeter of source for the production of ions of deuterium extracted from radio frequency plasma.

In the development of the neutral beam injector for ITER experiment, the test facility SPIDER is going to be built. To measure the beam parameters, several diagnostics are used. One of them is the Short-Time Retractable Instrumented Kalorimeter Experiment (STRIKE) which measures beam uniformity, beamlet divergence, and stripping losses. This contribution gives an overview of the diagnostics dedicated to these measurements: thermal cameras, thermocouples, current sensors, and electrostatic sensors. The specifications of these diagnostics have been defined according to the results of electrostatic and thermal simulations. A failure modes and effects analysis has been performed during the design. Consequently the project of the STRIKE diagnostics has been optimized to reduce the possible failure risks.

Thermal and electrostatic simulations of the diagnostic calorimeter for the source for production of ion of deuterium extracted from RF plasma beam.

To study and optimise negative ion production for the ITER neutral beam injectors, a test facility is under construction in Padova with the aim of testing beam characteristics and to verify the source proper operation. The instrumented calorimeter STRIKE (short-time retractable instrumented kalorimeter experiment) is being developed to characterise the SPIDER (Source for Production of Ion of Deuterium Extracted from RF plasma) beam during short operations. The paper presents an investigation of the response of STRIKE measurement systems. It results that biasing is necessary to cope with the influence of secondary electrons on current measurements; moreover, despite the discretisation of the recorded thermal patterns introduced by the pixels of thermal cameras, a sufficient spatial resolution is expected.

Vernix caseosa as a multi-component defence system based on polypeptides, lipids and their interactions.

Vernix caseosa is a white cream-like substance that covers the skin of the foetus and the newborn baby. Recently, we discovered antimicrobial peptides/proteins such as LL-37 in vernix, suggesting host defence functions of vernix. In a proteomic approach, we have continued to characterize proteins in vernix and have identified 20 proteins, plus additional variant forms. The novel proteins identified, considered to be involved in host defence, are cystatin A, UGRP-1, and calgranulin A, B and C. These proteins add protective functions to vernix such as antifungal activity, opsonizing capacity, protease inhibition and parasite inactivation. The composition of the lipids in vernix has also been characterized and among these compounds the free fatty acids were found to exhibit antimicrobial activity. Interestingly, the vernix lipids enhance the antimicrobial activity of LL-37 in vitro, indicating interactions between lipids and antimicrobial peptides in vernix. In conclusion, vernix is a balanced cream of compounds involved in host defence, protecting the foetus and newborn against infection.

Phylogeny, processing and expression of the rat cathelicidin rCRAMP: a model for innate antimicrobial peptides.

A database search identified a rat cDNA clone which phylogenetic analysis revealed to encode a cathelicidin most similar to mouse cathelicidin CRAMP. The analysis also showed that the evolutionary pattern of the cathelicidin family is lineage specific. The rat cathelicidin is called rCRAMP. Its peptide was isolated from granulocytes, and determined to be 43 amino acids long by mass spectrometry and N-terminal sequencing. Synthetic rCRAMP had antimicrobial activity. The expression of rCRAMP was investigated by reverse-transcriptase polymerase chain reaction followed by Southern hybridization and by Western blot analysis. rCRAMP was identified in granulocytes, thymus, testis, lung, mouth mucosa, tongue, oesophagus, colon, caecum and small intestine, a distribution similar to cathelicidins of mouse and human. The rat is a small laboratory animal with additional disease models available compared to the mouse. Our results open up the possibility to use the rat as a model system to study responses connected to cathelicidin expression in health and disease.