Azomethine-Containing Pyrrolo[3,2-b]pyrrole Copolymers for Simple and Degradable Conjugated Polymers.

Conjugated polymers have received significant attention as potentially lightweight and highly tailorable alternatives to inorganic semiconductors, but their synthesis is often complex, produces toxic byproducts, and they are not typically designed to be degradable or recyclable. These drawbacks necessitate dedicated efforts to discover materials with design motifs that enable targeted and efficient degradation of conjugated polymers. In this vein, the synthetic simplicity of 1,4-dihydropyrrolo[3,2-b]pyrroles (DHPPs) is exploited to access azomethine-containing copolymers via a benign acid-catalyzed polycondensation protocol. Polymerizations involve reacting a dialdehyde-functionalized dihydropyrrolopyrrole with p-phenylenediamine as the comonomer using p-toluenesulfonic acid as a catalyst. The inherent dynamic equilibrium of the azomethine bonds subsequently enabled the degradation of the polymers in solution in the presence of acid. Degradation of the polymers is monitored via NMR, UV-vis absorbance, and fluorescence spectroscopies, and the polymers are shown to be fully degradable. Notably, while absorbance measurements reveal a continued shift to higher energies with extended exposure to acid, fluorescence measurements show a substantial increase in the fluorescence response upon degradation. Results from this study encourage the continued development of environmentally-conscious polymerizations to attain polymeric materials with useful properties while simultaneously creating polymers with structural handles for end-of-life management or/and recyclability.

Conquering residual light absorption in the transmissive states of organic electrochromic materials.

In this short review, we provide an overview of our efforts in developing a family of anodically coloring electrochromic (EC) molecules that are fully transparent and colorless in the charge neutral state, and that can rapidly switch to a vibrantly colored state upon oxidation. We employ molecules with reduced conjugation lengths to center the neutral state absorption of the electrochrome in the ultraviolet, as desired for highly transparent and colorless materials. Oxidation creates radical cations that absorb light in the visible and near infrared regions of the electromagnetic spectrum, thus providing a host of accessible colors. Combining a density functional theory (DFT) computational approach fed back to the synthetic effort, target molecules are proposed, synthesized and studied, directing us to develop a complete color palette based on these high contrast ACE molecules. Utilizing pendant phosphonic acid binding substituents in concert with high surface area mesoporous indium tin oxide (ITO) electrodes, the electrochromes can be distributed throughout the oxide film, bringing high extent of light absorption and color density.

Evaluating the Role of Molecular Heredity in the Optical and Electronic Properties of Cross-Conjugated Benzo[1,2-d:4,5-d']bisoxazoles.

A series of eight benzo[1,2-d:4,5-d']bisoxazole (BBOs) were synthesized using the heredity principle as a design motif, whereby we investigated which characteristics of the linear parents were inherited by their cross-conjugated children. Four linear parents bearing 4-tert-butylbenzene (P) or 1,3-bis(4-tert-butylphenyl)benzene (M) at either the 2,6- or 4,8-position on the BBO and four cross-conjugated children bearing various combinations of the two isoelectronic aryl substituents were evaluated. Due to the bulky nature of the M substituent compared to that of the P substituent, the influence of steric hindrance along the BBO axes was explored theoretically and experimentally. The optical and electronic properties of each molecule were investigated in the solution and solid state using density functional theory (DFT) and time-dependent DFT (TD-DFT) and characterized using ultraviolet photoelectron spectroscopy (UPS), ultraviolet-visible (UV-vis) spectroscopy, and photoluminescence (PL) spectroscopy. The well-correlated theoretical and experimental results showed that the selective tuning of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels was possible through the strategic placement of substituents without impacting the H → L transition energy. Specifically, the theoretical results demonstrated that for the BBO children the HOMO and LUMO energy levels were inherited from the 4,8- and 2,6-parents, respectively. Each molecule was found to exhibit emission maxima ≤451 nm, making them ideal candidates for blue organic light-emitting diode (OLED) materials.

New Design Paradigm for Color Control in Anodically Coloring Electrochromic Molecules.

A new paradigm is established for the design of conjugated anodically coloring electrochromic molecules. It is shown that through crossconjugation the electronic energy levels of the radical cation state may be controllably tuned independent of the neutral state. It is shown how cross-conjugation can be used to tune the radical cation state independent of the neutral state. Manipulating the oscillator strengths of radical cation transitions allows for tuning of the color by shifting the λmax of the low-energy absorption by over 400 nm. The neutral states of these molecules are UV absorbing, providing solutions that are colorless with L*a*b* values of 100, 0, 0. They are oxidized to vibrantly colored radical cations with absorptions that span the visible spectrum, creating green, yellow, and red chromophores. These molecules are then mixed to create transmissive, colorless blends that switch to opaque black solutions.

Evaluating the Impact of Fluorination on the Electro-optical Properties of Cross-Conjugated Benzobisoxazoles.

Six 2,4,6,8-tetrarylbenzo[1,2- d:4,5- d']bisoxazoles (BBOs) were synthesized: three bearing phenyl substituents at the 2- and 6-positions and three bearing perfluorophenyl groups at those positions. The influence of perfluoro-aryl group substitution on the physical, optical, and electronic properties of 2,4,6,8-tetrarylbenzo[1,2- d:4,5- d']bisoxazoles (BBO) was evaluated using both experimental and theoretical methods. The density functional theory (DFT) model was found to be well-matched to the experimental optical data, as evidenced by the UV-vis spectra. Both cyclic voltammetry (CV) and ultraviolet photoelectron spectroscopy (UPS) were used to determine the position of the HOMO with varying results. The values obtained by CV were deeper than those obtained via UPS and correlated well with the theoretical calculations. However, the UPS values were more consistent with the expected outcomes for a system with segregated frontier molecular orbitals (FMOs). The UPS results are also supported by the electrostatic potential maps, which indicate that the electron density within the LUMO and HOMO is nearly completely localized along the 2,6- or 4,8-axis, respectively. The summation of the results indicates that strongly electron-withdrawing groups can be used to selectively tune the LUMO level with minor perturbation of the HOMO, something that is challenging to accomplish in typical donor-acceptor systems.

Influence of conjugation axis on the optical and electronic properties of aryl-substituted benzobisoxazoles.

Six different 2,6-diethyl-4,8-diarylbenzo[1,2-d:4,5-d']bis(oxazoles) and four different 2,4,6,8-tetraarylbenzobisoxazoles were synthesized in two steps: a Lewis acid catalyzed orthoester cyclization followed by a Suzuki or Stille cross-coupling with various arenes. The influence of aryl group substitution and/or conjugation axis variation on the optical and electronic properties of these benzobis(oxazole) (BBO) compounds was evaluated. Structural modifications could be used to alter the HOMO, LUMO, and band gap over a range of 1.0, 0.5, and 0.5 eV, respectively. However, depending on the location and identity of the substituent, the HOMO level can be altered without significantly impacting the LUMO level. This is supported by the calculated frontier molecular orbitals. Our results indicate that the FMOs and band gaps of benzobisoxazoles can be readily modified either jointly or individually.

Synthesis of 3,7-diiodo-2,6-di(thiophen-2-yl)benzo[1,2-b:4,5-b']difurans: functional building blocks for the design of new conjugated polymers.

3,7-Diiodo-2,6-di(thiophen-2-yl)benzo[1,2-b:4,5-b']difurans are efficiently prepared by an iodine-promoted double cyclization. This new heterocyclic core is readily modified by the attachment of alkyl chains for improved solubility. The use of these compounds for the synthesis of new conjugated polymers is also reported.

Tuning the optical and electronic properties of 4,8-disubstituted benzobisoxazoles via alkyne substitution.

In an effort to design new electron-deficient building blocks for the synthesis of conjugated materials, a series of new trans-benzobisoxazoles bearing halogen or alkynyl substituents at the 4,8-positions was synthesized. Additionally, the impact of these modifications on the optical and electronic properties was investigated. Theoretical calculations predicted that the incorporation of various alkynes can be used to tune the energy levels and band gaps of these small molecules. The targeted 4,8-disubstituted benzobisoxazoles were easily prepared in good yields using a two-step reaction sequence: Lewis acid catalyzed orthoester cyclization followed by Sonogashira cross-coupling. The experimentally determined HOMO values for these 4,8-disubstituted benzobisoxazoles ranged from -4.97 to -6.20 eV and showed reasonable correlation to the theoretically predicted values, with a percent deviation that ranged from 2.4-12.8%. However, the deviation between actual and predicted HOMO values was reduced to less than 3.5% when the theoretical values were extrapolated to the long-chain limit and compared to copolymers containing the 4,8-disubstituted benzobisoxazoles. Collectively, these results indicate that these 4,8-disubstituted trans-benzobisoxazoles can be used for the synthesis of new conjugated materials with electronic properties that are variable and predictable.

Synthesis, characterization and photovoltaic properties of poly(thiophenevinylene-alt-benzobisoxazole)s.

Herein we report the synthesis of two solution processible, conjugated polymers containing the benzobisoxazole moiety. The polymers were characterized using (1)H NMR, UV-Vis and fluorescence spectroscopy. Thermal gravimetric analysis shows that the polymers do not exhibit significant weight loss until approximately 300 °C under nitrogen. Cyclic voltammetry shows that the polymers have reversible reduction waves with estimated LUMO levels at -3.02 and -3.10 eV relative to vacuum and optical bandgaps of 2.04-2.17 eV. Devices based on blends of the copolymers and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) exhibited modest power conversion efficiencies. Theoretical models reveal that there is poor electron delocalization along the polymer backbone, leading to poor performance. However, the energy levels of these polymers indicate that the incorporation of benzobisoxazoles into the polymer backbone is a promising strategy for the synthesis of new materials.