Sequential Lonsdaleite to Diamond Formation in Ureilite Meteorites via In Situ Chemical Fluid/Vapor Deposition.

Ureilite meteorites are arguably our only large suite of samples from the mantle of a dwarf planet and typically contain greater abundances of diamond than any known rock. Some also contain lonsdaleite, which may be harder than diamond. Here, we use electron microscopy to map the relative distribution of coexisting lonsdaleite, diamond, and graphite in ureilites. These maps show that lonsdaleite tends to occur as polycrystalline grains, sometimes with distinctive fold morphologies, partially replaced by diamond + graphite in rims and cross-cutting veins. These observations provide strong evidence for how the carbon phases formed in ureilites, which, despite much conjecture and seemingly conflicting observations, has not been resolved. We suggest that lonsdaleite formed by pseudomorphic replacement of primary graphite shapes, facilitated by a supercritical C-H-O-S fluid during rapid decompression and cooling. Diamond + graphite formed after lonsdaleite via ongoing reaction with C-H-O-S gas. This graphite > lonsdaleite > diamond + graphite formation process is akin to industrial chemical vapor deposition but operates at higher pressure (∼1-100 bar) and provides a pathway toward manufacture of shaped lonsdaleite for industrial application. It also provides a unique model for ureilites that can reconcile all conflicting observations relating to diamond formation.

Localised solution environments drive radionuclide fractionation in uraninite.

We explore the role of various solution environments - chloride brines, acid mine drainage (sulfate) and groundwater (carbonate), as well as pore pressure in producing secular disequilibrium among the various radionuclides (RN) in the U-decay series upon leaching of uraninite - the most abundant U-ore and a widespread accessory mineral in U-rich rocks. We observed that the end products of the U-decay chain, 206Pb and 207Pb, exist primarily at the surface/edges of grains or within large pores in the uraninite. In contrast, the intermediate daughters 226Ra, 210Pb, 210Po, and 234/230Th, exist primarily within the bulk of uraninite, requiring breakdown by leaching for subsequent mobility to occur. Overall, pore pressure had little effect on RN mobility, with solution environment being the primary factor in creating significant mobility and disequilibrium among the RN, as it drives the initial breakdown of uraninite and influences the subsequent differential solubility of individual RNs. This was particularly the case for carbonate-bearing fluids, leading to significant fractionation of the various daughter RN arising from variable complexation and sorption phenomena. Understanding the geochemical behaviour of the RN in the U-decay series is important for predicting and managing the risks associated with RN in both environmental (acid-mine drainage) and engineered (metallurgical extraction) processes. Effective modelling of long-term RN behaviour should incorporate this strong relative fractionation caused by contrasting geochemical behaviour of individual RN during and after their release into the water from uraninite and subsequent interaction with the surrounding aquifer host rocks.

Observations on the Early Stages of Corrosion on AA2099-T83.

An Al­Cu­Li aerospace alloy has been investigated to determine the order in which corrosion at different types of sites occurs in AA2099-T83. Specifically, the sequence of galvanic attack on intermetallic (IM) particles and other sites of AA2099-T83 was determined as a function of time, in 0.1 M NaCl, through the use of scanning electron microscopy and electron backscatter diffraction characterization techniques. The earliest attack occurred at isolated grains and grain boundaries and on Li-containing dispersoids. Similarly, some constituent IM particles showed evidence of trenching in the surrounding alloy matrix. These IM particles included Al7Cu2Fe and another group of unidentified particles which displayed complete trenching within the first 10 min of exposure. Al13(Fe, Mn)4 were next most active followed by Al37Fe12Cu2 with Al6(Fe,Mn) and large TiB2 particles being the least active.

Investigation of the Internal Structure of a Modern Seafloor Hydrothermal Chimney With a Combination of EBSD, EPMA, and XRD.

Samples from the sphalerite-dominated zone of a seafloor massive sulfide chimney, the Satanic Mills Chimney of the PACMANUS hydrothermal field, have been investigated to determine the internal macrostructure and microstructure of this zone, the phases present, and the distribution of metals. A combination of electron probe microanalysis, electron backscattered diffraction, and x-ray diffraction has been used. At the macroscale, this zone of the chimney wall is heavily porous and is comprised primarily of sphalerite, enclosing minor chalcopyrite, pyrite, and wurtzite. A Pb­As sulfosalt layer of possible microbial origins is present at the outer edge of the sphalerite matrix, next to a pore. The sphalerite has grown in globules on the order of 300 µm in diameter. At the microscale, the sphalerite features a colloform texture and a duplex-type grain structure consisting of either fine-grain regions in the center surrounded by coarse-grained regions or radiating coarse grains only. Pb- and As-rich bands have been detected in the colloform sphalerite, and growth twins have been observed in both the sphalerite and chalcopyrite crystals. A qualitative description of the growth of a typical globule is given, including nucleation, crystal growth, and solute redistribution.

Deciphering the Complex Mineralogy of River Sand Deposits through Clustering and Quantification of Hyperspectral X-Ray Maps.

Alluvial mineral sands rank among the most complex subjects for mineral characterization due to the diverse range of minerals present in the sediments, which may collectively contain a daunting number of elements (>20) in major or minor concentrations (>1 wt%). To comprehensively characterize the phase abundance and chemistry of these complex mineral specimens, a method was developed using hyperspectral x-ray and cathodoluminescence mapping in an electron probe microanalyser (EPMA), coupled with automated cluster analysis and quantitative analysis of clustered x-ray spectra. This method proved successful in identifying and quantifying over 40 phases from mineral sand specimens, including unexpected phases with low modal abundance (<0.1%). The standard-based quantification method measured compositions in agreement with expected stoichiometry, with elemental detection limits in the range of <10­1,000 ppm, depending on phase abundance, and proved reliable even for challenging mineral species, such as the multi-rare earth element (REE) bearing mineral xenotime [(Y,REE)PO4] for which 24 elements were analyzed, including 12 overlapped REEs. The mineral identification procedure was also capable of characterizing mineral groups that exhibit significant compositional variability due to the substitution of multiple elements, such as garnets (Mg, Ca, Fe, Mn, Cr), pyroxenes (Mg, Ca, Fe), and amphiboles (Na, Mg, Ca, Fe, Al).

Soft X-Ray and Cathodoluminescence Examination of a Tanzanian Graphite Deposit.

Hyperspectral soft X-ray emission (SXE) and cathodoluminescence (CL) spectrometry have been used to investigate a carbonaceous-rich geological deposit to understand the crystallinity and morphology of the carbon and the associated quartz. Panchromatic CL maps show both the growth of the quartz and the evidence of recrystallization. A fitted CL map reveals the distribution of Ti4+ within the grains and shows subtle growth zoning, together with radiation halos from 238U decay. The sensitivity of the SXE spectrometer to carbon, together with the anisotropic X-ray emission from highly orientated pyrolytic graphite, has enabled the C Kα peak shape to be used to measure the crystal orientation of individual graphite regions. Mapping has revealed that most grains are predominantly of a single orientation, and a number of graphite grains have been investigated to demonstrate the application of this new SXE technique. A peak fitting approach to analyzing the SXE spectra was developed to project the C Kα 2pz and 2p(x+y) orbital components of the graphite. The shape of these two end-member components is comparable to those produced by electron density of states calculations. The angular sensitivity of the SXE spectrometer has been shown to be comparable to that of electron backscatter diffraction.

An Examination of the Composition and Microstructure of Coarse Intermetallic Particles in AA2099-T8, Including Li Detection.

Electron and proton microprobes, along with electron backscatter diffraction (EBSD) analysis were used to study the microstructure of the contemporary Al-Cu-Li alloy AA2099-T8. In electron probe microanalysis, wavelength and energy dispersive X-ray spectrometry were used in parallel with soft X-ray emission spectroscopy (SXES) to characterize the microstructure of AA2099-T8. The electron microprobe was able to identify five unique compositions for constituent intermetallic (IM) particles containing combinations of Al, Cu, Fe, Mn, and Zn. A sixth IM type was found to be rich in Ti and B (suggesting TiB2), and a seventh IM type contained Si. EBSD patterns for the five constituent IM particles containing Al, Cu, Fe, Mn, and Zn indicated that they were isomorphous with four phases in the 2xxx series aluminium alloys including Al6(Fe, Mn), Al13(Fe, Mn)4 (two slightly different compositions), Al37Cu2Fe12 and Al7Cu2Fe. SXES revealed that Li was present in some constituent IM particles. Al SXES mapping revealed an Al-enriched (i.e., Cu, Li-depleted) zone in the grain boundary network. From the EBSD analysis, the kernel average misorientation map showed higher levels of localized misorientation in this region, suggesting greater deformation or stored energy. Proton-induced X-ray emission revealed banding of the TiB2 IM particles and Cu inter-band enrichment.

Hyperspectral cathodoluminescence examination of defects in a carbonado diamond.

Hyperspectral cathodoluminescence mapping is used to examine a carbonado diamond. The hyperspectral dataset is examined using a data clustering algorithm to interpret the range of spectral shapes present within the dataset, which are related to defects within the structure of the diamond. The cathodoluminescence response from this particular carbonado diamond can be attributed to a small number of defect types: N-V0, N2V, N3V, a 3.188 eV line, which is attributed to radiation damage, and two broad luminescence bands. Both the N2V and 3.188 eV defects require high-temperature annealing, which has implications for interpreting the thermal history of the diamond. In addition, bright halos observed within the diamond cathodoluminescence, from alpha decay radiation damage, can be attributed to the decay of 238U.

A study of cathodoluminescence and trace element compositional zoning in natural quartz from volcanic rocks: mapping titanium content in quartz.

This article concerns application of cathodoluminescence (CL) spectroscopy to volcanic quartz and its utility in assessing variation in trace quantities of Ti within individual crystals. CL spectroscopy provides useful details of intragrain compositional variability and structure but generally limited quantitative information on element abundances. Microbeam analysis can provide such information but is time-consuming and costly, particularly if large numbers of analyses are required. To maximize advantages of both approaches, natural and synthetic quartz crystals were studied using high-resolution hyperspectral CL imaging (1.2-5.0 eV range) combined with analysis via laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS). Spectral intensities can be deconvolved into three principal contributions (1.93, 2.19, and 2.72 eV), for which intensity of the latter peak was found to correlate directly with Ti concentration. Quantitative maps of Ti variation can be produced by calibration of the CL spectral data against relatively few analytical points. Such maps provide useful information concerning intragrain zoning or heterogeneity of Ti contents with the sensitivity of LA-ICPMS analysis and spatial resolution of electron microprobe analysis.