A morphological database for 606 Colombian bird species.

Colombia is the country with the highest bird diversity in the world. Despite active research in ornithology, compelling morphological information of most bird species is still sparse. However, morphological information is the baseline to understand how species respond to environmental variation and how ecosystems respond to species loss. As part of a national initiative, the Instituto Alexander von Humboldt in collaboration with 12 Colombian institutions and seven biological collections, measured up to 15 morphological traits of 9,892 individuals corresponding to 606 species: 3,492 from individuals captured in field and 6,400 from museum specimens. Species measured are mainly distributed in high Andean forest, páramo, and wetland ecosystems. Seven ornithological collections in Colombia and 18 páramo complexes throughout Colombia were visited from 2013 to 2015. The morphological traits involved measurements from bill (total and exposed culmen, bill width and depth), wing (length, area, wingspan, and the distance between longest primary and longest secondary), tail (length and shape), tarsus (length), hallux (length and claw hallux), and mass. The number of measured specimens per species was variable, ranging from 1 to 321 individuals with a median of four individuals per species. Overall, this database gathered morphological information for >30% of Colombian bird diversity. No copyright, proprietary, or cost restrictions apply; the data should be cited appropriately when used.

A Study of Vertical Transport through Graphene toward Control of Quantum Tunneling.

Vertical integration of van der Waals (vdW) materials with atomic precision is an intriguing possibility brought forward by these two-dimensional (2D) materials. Essential to the design and analysis of these structures is a fundamental understanding of the vertical transport of charge carriers into and across vdW materials, yet little has been done in this area. In this report, we explore the important roles of single layer graphene in the vertical tunneling process as a tunneling barrier. Although a semimetal in the lateral lattice plane, graphene together with the vdW gap act as a tunneling barrier that is nearly transparent to the vertically tunneling electrons due to its atomic thickness and the transverse momenta mismatch between the injected electrons and the graphene band structure. This is accentuated using electron tunneling spectroscopy (ETS) showing a lack of features corresponding to the Dirac cone band structure. Meanwhile, the graphene acts as a lateral conductor through which the potential and charge distribution across the tunneling barrier can be tuned. These unique properties make graphene an excellent 2D atomic grid, transparent to charge carriers, and yet can control the carrier flux via the electrical potential. A new model on the quantum capacitance's effect on vertical tunneling is developed to further elucidate the role of graphene in modulating the tunneling process. This work may serve as a general guideline for the design and analysis of vdW vertical tunneling devices and heterostructures, as well as the study of electron/spin injection through and into vdW materials.

Rapid Fabrication of Graphene Field-Effect Transistors with Liquid-metal Interconnects and Electrolytic Gate Dielectric Made of Honey.

Historically, graphene-based transistor fabrication has been time-consuming due to the high demand for carefully controlled Raman spectroscopy, physical vapor deposition, and lift-off processes. For the first time in a three-terminal graphene field-effect transistor embodiment, we introduce a rapid fabrication technique that implements non-toxic eutectic liquid-metal Galinstan interconnects and an electrolytic gate dielectric comprised of honey. The goal is to minimize cost and turnaround time between fabrication runs; thereby, allowing researchers to focus on the characterization of graphene phenomena that drives innovation rather than a lengthy device fabrication process that hinders it. We demonstrate characteristic Dirac peaks for a single-gate graphene field-effect transistor embodiment that exhibits hole and electron mobilities of 213 ± 15 and 166 ± 5 cm 2/V·s respectively. We discuss how our methods can be used for the rapid determination of graphene quality and can complement Raman Spectroscopy techniques. Lastly, we explore a PN junction embodiment which further validates that our fabrication techniques can rapidly adapt to alternative device architectures and greatly broaden the research applicability.

Dual-mode operation of 2D material-base hot electron transistors.

Vertical hot electron transistors incorporating atomically-thin 2D materials, such as graphene or MoS2, in the base region have been proposed and demonstrated in the development of electronic and optoelectronic applications. To the best of our knowledge, all previous 2D material-base hot electron transistors only considered applying a positive collector-base potential (VCB > 0) as is necessary for the typical unipolar hot-electron transistor behavior. Here we demonstrate a novel functionality, specifically a dual-mode operation, in our 2D material-base hot electron transistors (e.g. with either graphene or MoS2 in the base region) with the application of a negative collector-base potential (VCB < 0). That is, our 2D material-base hot electron transistors can operate in either a hot-electron or a reverse-current dominating mode depending upon the particular polarity of VCB. Furthermore, these devices operate at room temperature and their current gains can be dynamically tuned by varying VCB. We anticipate our multi-functional dual-mode transistors will pave the way towards the realization of novel flexible 2D material-based high-density and low-energy hot-carrier electronic applications.

Atomic-Monolayer MoS2 Band-to-Band Tunneling Field-Effect Transistor.

The experimental observation of band-to-band tunneling in novel tunneling field-effect transistors utilizing a monolayer of MoS2 as the conducting channel is demonstrated. Our results indicate that the strong gate-coupling efficiency enabled by two-dimensional materials, such as monolayer MoS2 , results in the direct manifestation of a band-to-band tunneling current and an ambipolar transport.

High-Current Gain Two-Dimensional MoS2-Base Hot-Electron Transistors.

The vertical transport of nonequilibrium charge carriers through semiconductor heterostructures has led to milestones in electronics with the development of the hot-electron transistor. Recently, significant advances have been made with atomically sharp heterostructures implementing various two-dimensional materials. Although graphene-base hot-electron transistors show great promise for electronic switching at high frequencies, they are limited by their low current gain. Here we show that, by choosing MoS2 and HfO2 for the filter barrier interface and using a noncrystalline semiconductor such as ITO for the collector, we can achieve an unprecedentedly high-current gain (α ∼ 0.95) in our hot-electron transistors operating at room temperature. Furthermore, the current gain can be tuned over 2 orders of magnitude with the collector-base voltage albeit this feature currently presents a drawback in the transistor performance metrics such as poor output resistance and poor intrinsic voltage gain. We anticipate our transistors will pave the way toward the realization of novel flexible 2D material-based high-density, low-energy, and high-frequency hot-carrier electronic applications.

Vertical graphene-base hot-electron transistor.

We demonstrate vertical graphene-base hot-electron transistors (GB-HETs) with a variety of structures and material parameters. Our GB-HETs exhibit a current saturation with a high current on-off ratio (>10(5)), which results from both the vertical transport of hot electrons across the ultrathin graphene base and the filtering of hot electrons through a built-in energy barrier. The influences of the materials and their thicknesses used for the tunneling and filtering barriers on the common-base current gain α are studied. The optimization of the SiO2 thickness and using HfO2 as the filtering barrier significantly improves the common-base current gain α by more than 2 orders of magnitude. The results demonstrate that GB-HETs have a great potential for high-frequency, high-speed, and high-density integrated circuits.

Edge effect on resistance scaling rules in graphene nanostructures.

We report an experimental investigation of the edge effect on the room-temperature transport in graphene nanoribbon and graphene sheet (both single-layer and bilayer). By measuring the resistance scaling behaviors at both low- and high-carrier densities, we show that the transport of single-layer nanoribbons lies in a strong localization regime, which can be attributed to an edge effect. We find that this edge effect can be weakened by enlarging the width, decreasing the carrier densities, or adding an extra layer. From graphene nanoribbon to graphene sheet, the data show a dimensional crossover of the transport regimes possibly due to the drastic change of the edge effect.

Enhanced conductance fluctuation by quantum confinement effect in graphene nanoribbons.

Conductance fluctuation is usually unavoidable in graphene nanoribbons (GNR) due to the presence of disorder along its edges. By measuring the low-frequency noise in GNR devices, we find that the conductance fluctuation is strongly correlated with the density-of-states of GNR. In single-layer GNR, the gate-dependence of noise shows peaks whose positions quantitatively match the subband positions in the band structures of GNR. This correlation provides a robust mechanism to electrically probe the band structure of GNR, especially when the subband structures are smeared out in conductance measurement.

Effect of spatial charge inhomogeneity on 1/f noise behavior in graphene.

Scattering mechanisms in graphene are critical to understanding the limits of signal-to-noise ratios of unsuspended graphene devices. Here we present the four-probe low-frequency noise (1/f) characteristics in back-gated single layer graphene (SLG) and bilayer graphene (BLG) samples. Contrary to the expected noise increase with the resistance, the noise for SLG decreases near the Dirac point, possibly due to the effects of the spatial charge inhomogeneity. For BLG, a similar noise reduction near the Dirac point is observed, but with a different gate dependence of its noise behavior. Some possible reasons for the different noise behavior between SLG and BLG are discussed.