Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 8 de 8
Filter
Add more filters










Database
Language
Publication year range
1.
J Craniofac Surg ; 34(6): 1682-1685, 2023 Sep 01.
Article in English | MEDLINE | ID: mdl-37487109

ABSTRACT

There is still no consensus on the optimal age for alveolar grafting. In order to decide on the success of this graft, the best known radiographic assessments lacks precision. Kamperos recently proposed a 3D CBCT score that simultaneously assesses alveolar bone height and thickness, as well as the nasal floor level. The aim of this study was to apply this new score and compare it between an early secondary alveolar grafting « ESAG ¼ (4-7 y) and a late secondary alveolar grafting « LSAG ¼ (8-11 y) surgery group. A total of 32 cases of ESAG and 17 of LSAG were analysed. On 3D imaging, the median age of ESAGs was 10 years and 15 years for LSAGs. In the ESAGs, 78% of the permanents canines were not on the arch compared to 18% in the LSAGs. In both groups, the reconstruction of the nasal floor was very adequate but the height and thickness appeared less good in the ESAGs. The final score was higher in LSAG (Chi2, P < 0.005). The analysis of the alveolar bone with the Kamperos score is accurate and relevant but it should preferably be performed in the permanent dentition phase. This is because the area of rhizalysis of the primary teeth and the follicular sac of the erupting permanent teeth influence the presence of effective bone.


Subject(s)
Arthrodesis , Bone Transplantation , Consensus , Imaging, Three-Dimensional , Nose
2.
Lasers Med Sci ; 36(2): 437-445, 2021 Mar.
Article in English | MEDLINE | ID: mdl-32621128

ABSTRACT

Photobiomodulation (PBM) has been shown to improve cell proliferation and cell migration. Many cell types have been investigated, with most studies using deep penetrating red light irradiation. Considering the interest of surface biostimulation of oral mesenchymal cells after surgical wound, the present study aimed to assess green light irradiation effects on Dental Pulp Stem Cells' (DPSC) proliferation and migration. To understand the mechanisms underlying these effects, we investigated cytoskeleton organization and subsequent cell shape and stiffness. A 532-nm wavelength Nd:YAG laser (30 mW) was applied between 30 and 600 s on DPSC in vitro. Cell proliferation was analyzed at 24, 48, and 72 h after irradiation, by cell counting and enzymatic activity quantification (paranitrophenylphosphate phosphatase (pNPP) test). A wound healing assay was used to study cell migration after irradiation. Effects of PBM on cytoskeleton organization and cell shape were assessed by actin filaments staining. Elasticity changes after irradiation were quantified in terms of Young's modulus measured using Atomic Force Microscopy (AFM) force spectroscopy. Green light significantly improved DPSC proliferation with a maximal effect obtained after 300-s irradiation (energy fluence 5 J/cm2). This irradiation had a significant impact on cell migration, improving wound healing after 24 h. These results were concomitant with a decrease of cells' Young's modulus after irradiation. This cell softening was explained by actin cytoskeleton reorganization, with diminution of cell circularity and more abundant pseudopodia. This study highlights the interest of green laser PMB for the proliferation and migration of mesenchymal stem cells, with encouraging results for clinical application, especially for surgical wound healing procedures.


Subject(s)
Cytoskeleton/radiation effects , Dental Pulp/cytology , Low-Level Light Therapy , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/radiation effects , Wound Healing/radiation effects , Adolescent , Adult , Biomechanical Phenomena/radiation effects , Cell Movement/radiation effects , Cell Proliferation/radiation effects , Cell Shape/radiation effects , Cells, Cultured , Humans , Young Adult
3.
Oral Surg Oral Med Oral Pathol Oral Radiol ; 130(6): e324-e327, 2020 Dec.
Article in English | MEDLINE | ID: mdl-32646671

ABSTRACT

Oral ulcers have a number of causes, and as a result, their etiology can be difficult to determine. Clinical management can range from simple treatment of the symptoms to extensive surgical excision, as in the case of malignant ulcers. Nicorandil, an antiangina drug, has been identified as a potential trigger for cutaneomucosal ulcers. This article reviews the importance of taking a full medical history when seeking to identify the side effects of treatments. We present the case of a 70-year-old patient with chronic ulceration of the oral mucosa. Determining the cause of ulceration as a side effect of taking nicorandil was delayed because the team that initially managed the patient hypothesized a malignant etiology. As a result, a partial glossectomy was performed for diagnostic and therapeutic purposes. After extensive examination of the patient's medical history and current treatments, nicorandil was identified as the potential trigger. The patient finally recovered after discontinuation of nicorandil.


Subject(s)
Nicorandil , Oral Ulcer , Aged , Delayed Diagnosis , Humans , Mouth Mucosa , Nicorandil/adverse effects , Oral Ulcer/drug therapy , Vasodilator Agents/adverse effects
4.
Case Rep Dent ; 2019: 2138928, 2019.
Article in English | MEDLINE | ID: mdl-31482039

ABSTRACT

Spindle cell lipoma (SCL) is a rare variety of lipoma that mostly arises in male patients and rarely affects the oral cavity. The floor of the mouth is an uncommon site for SCL, and very few cases have been reported in this location. A case of SCL is reported in a 70-year-old woman who had noticed a swelling of the floor of the mouth without any functional consequence. Both ultrasonography and RMI suggested a diagnosis of ranula, whereas clinical palpation showed a nonfluctuant mass. The lesion was excised under local anesthesia. A 37 × 32 mm encapsulated yellow mass was removed. Histological features (mature adipocytes and CD34+ spindle cells) led to a diagnosis of SCL. Medical imaging assessment of this lesion could have been influenced by the high frequency of the ranulas in the floor of the mouth. This case appears to be quite infrequent because of its location (floor of the mouth), its size (over 3.5 cm), and the patient's gender (female).

6.
Case Rep Dermatol ; 9(1): 114-120, 2017.
Article in English | MEDLINE | ID: mdl-28559809

ABSTRACT

Fuchs syndrome is a particular type of erythema multiforme major; the lesions are only found on the mucosae and specifically affect oral, ocular, and genital mucosae. The cause is not always immediately apparent, which is why this pathology requires a rigorous, detailed clinical examination to eliminate a differential diagnosis. The severity of the symptoms, particularly of oral and ocular symptoms, requires immediate treatment. The treatment of this pathology requires a multiple-drug regime. Through a clinical case study, the objective of this work is to help guide practitioners when diagnosing and treating this pathology as no current consensus exists on these 2 subjects. The authors present the case of a 29-year-old patient who was suffering from a recurring outbreak of Fuchs syndrome, suspected of having been triggered by Mycoplasma pneumoniae. After completing the treatment program based on colchicine and prednisolone, the patient was relieved from pain and has not suffered from any further periodic eruptions of erythema multiforme.

7.
Int J Oral Maxillofac Implants ; 27(6): 1409-12, 2012.
Article in English | MEDLINE | ID: mdl-23189290

ABSTRACT

PURPOSE: The aim of this study was to evaluate, with a new gas flow technique, leakage at the implant/abutment junction in systems with four different connections. MATERIALS AND METHODS: Five Branemark System, five One Morse, five Intra-lock System, and five Ankylos Plus implants and abutments were used. A hole was drilled in the apex of each implant to allow gas to flow through the connection from negative to atmospheric pressure. The gas flow was calculated (slope of pressure decrease, in hPa.s-1). Each connection was tested after both manual and key tightening. Statistical analysis was performed on a generalized linear model with repeated measurements. The significance level was set at α=.05. RESULTS: A global significant difference was observed between the various systems (P=.0001). After manual tightening, gas leakage was (Ln[hPa.s-1], means±standard deviations): One Morse: 0.20 (±1.70); Branemark System: -4.56 (±2.61); Intra-lock: -4.31 (±4.17); Ankylos Plus; -7.59 (±0.76). After key tightening, mean values were: One Morse: -2.51 (±2.72); Branemark System: -7.23 (±1.01); Intra-lock: -7.76 (±0.50); Ankylos Plus; -7.73 (±0.62). CONCLUSION: This study confirms that gas flow is an appropriate method to assess connection leakage. Ankylos Plus connection leakage was very low when the assembly was tightened manually. Among conical connection systems, low (Ankylos Plus) and high (One Morse) leakage was observed. This gas flow study suggests, therefore, that connection design is not the most important parameter for implant/abutment connection leakage.


Subject(s)
Dental Implant-Abutment Design/methods , Dental Leakage/diagnosis , Gases , Atmospheric Pressure
8.
Biomed Eng Online ; 10: 28, 2011 Apr 14.
Article in English | MEDLINE | ID: mdl-21492459

ABSTRACT

BACKGROUND: Most dental implant systems are presently made of two pieces: the implant itself and the abutment. The connection tightness between those two pieces is a key point to prevent bacterial proliferation, tissue inflammation and bone loss. The leak has been previously estimated by microbial, color tracer and endotoxin percolation. METHODS: A new nitrogen flow technique was developed for implant-abutment connection leakage measurement, adapted from a recent, sensitive, reproducible and quantitative method used to assess endodontic sealing. RESULTS: The results show very significant differences between various sealing and screwing conditions. The remaining flow was lower after key screwing compared to hand screwing (p = 0.03) and remained different from the negative test (p = 0.0004). The method reproducibility was very good, with a coefficient of variation of 1.29%. CONCLUSIONS: Therefore, the presented new gas flow method appears to be a simple and robust method to compare different implant systems. It allows successive measures without disconnecting the abutment from the implant and should in particular be used to assess the behavior of the connection before and after mechanical stress.


Subject(s)
Dental Abutments , Dental Implants , Dental Stress Analysis/methods , Stress, Mechanical , Dental Leakage , Dental Prosthesis, Implant-Supported , Humans , Reproducibility of Results
SELECTION OF CITATIONS
SEARCH DETAIL
...