Naphthalene Detection in Air by Highly Sensitive TiO2 Sensor: Real Time Response to Concentration Changes Monitored by Simultaneous UV Spectrophotometry.

Volatile low-weight polycyclic aromatic hydrocarbons (PAHs) are known to be potentially toxic to humans and animals. Their detection in ambient air has been of great interest in recent years and various detection methods have been implemented. In this study, we used naphthalene as a basic model of such compounds and constructed our own version of a titanium oxide-based sensor system for its detection. The main goal of the study was to clearly demonstrate the effectiveness of this type of sensor, record its response under well-controlled conditions, and compare that response to concentration measurements made by the widely accepted spectrophotometric method. With that goal in mind, we recorded the sensor response while monitoring naphthalene vapor concentrations down to 95 nM as measured by spectrophotometry. Air flow over the sensor was passed continuously and sample measurements were made every 3 min for a period of up to 2 h. Over that period, several cycles of naphthalene contamination and cleaning were implemented and measurements were recorded. The relative humidity and temperature of the air being sampled were also monitored to assure no major variations occurred that could affect the measurements. The sensor showed high sensitivity and a reproducible response pattern to changes in naphthalene concentration. It could be easily "cleaned" of the compound in ten minutes by means of the application of UV light and the passing of fresh air. Pending testing with other volatile PAH, this type of sensor proves to be an effective and inexpensive way to detect naphthalene in air.

Regulation of pseudopodia localization in lymphocytes through application of mechanical forces by optical tweezers.

T-lymphocytes are responsible for cell-mediated immunity, and recognize antigens on target cells (e.g., tumor cells, virus-infected cells) and antigen presenting cells (e.g., macrophages, dendritic cells). While mechanical forces applied to a cell surface can produce alterations in the cytoskeletal structure, leading to global structural rearrangements and changes in the intracellular biochemistry and gene expression, it remains unknown if local mechanical forces acting at the lymphocyte-antigen interaction site play any role in lymphocyte activation following antigen recognition. In this study we investigate the effect of such forces induced by optical tweezers on the lymphocyte's morphological response. We brought optically trapped polystyrene beads, coated with a specific antibody against a clonotypic epitope of the T-cell receptors (TCRs), in contact with individual lymphocytes and applied mechanical forces at the TCR-antibody interaction site. Although bead size was a factor, simple bead contact tended to induce formation of pseudopodia that appeared randomly over the cell's surface, while application of tangential forces at the interaction site redirected pseudopodia formation toward that site and promoted endocytosis activity. We propose that local forces play a key role in the initial lymphocyte adhesion to antigen-bearing cells, and may be implicated in antigen-specific motility, transendothelial migration, and tissue homing to sites of inflammation.

Effects of cryogen spray cooling and high radiant exposures on selective vascular injury during laser irradiation of human skin.

BACKGROUND: Increasing radiant exposure offers a means to increase treatment efficacy during laser-mediated treatment of vascular lesions, such as port-wine stains; however, excessive radiant exposure decreases selective vascular injury due to increased heat generation within the epidermis and collateral damage to perivascular collagen. OBJECTIVE: To determine if cryogen spray cooling could be used to maintain selective vascular injury (ie, prevent epidermal and perivascular collagen damage) when using high radiant exposures (16-30 J/cm2). DESIGN: Observational study. SETTING: Academic hospital and research laboratory. PATIENTS: Twenty women with normal abdominal skin (skin phototypes I-VI). INTERVENTIONS: Skin was irradiated with a pulsed dye laser (wavelength = 585 nm; pulse duration = 1.5 milliseconds; 5-mm-diameter spot) using various radiant exposures (8-30 J/cm2) without and with cryogen spray cooling (50- to 300-millisecond cryogen spurts). MAIN OUTCOME MEASURE: Hematoxylin-eosin-stained histologic sections from each irradiated site were examined for the degree of epidermal damage, maximum depth of red blood cell coagulation, and percentage of vessels containing perivascular collagen coagulation. RESULTS: Long cryogen spurt durations (>200 milliseconds) protected the epidermis in light-skinned individuals (skin phototypes I-IV) at the highest radiant exposure (30 J/cm2); however, epidermal protection could not be achieved in dark-skinned individuals (skin phototypes V-VI) even at the lowest radiant exposure (8 J/cm2). The red blood cell coagulation depth increased with increasing radiant exposure (to >2.5 mm for skin phototypes I-IV and to approximately 1.2 mm for skin phototypes V-VI). In addition, long cryogen spurt durations (>200 milliseconds) prevented perivascular collagen coagulation in all skin types. CONCLUSIONS: Cryogen spurt durations much longer than those currently used in therapy (>200 milliseconds) may be clinically useful for protecting the epidermis and perivascular tissues when using high radiant exposures during cutaneous laser therapies. Additional studies are necessary to prove clinical safety of these protocols.

Temporal effects of cell adhesion on mechanical characteristics of the single chondrocyte.

Cell adhesion to material surfaces is a fundamental phenomenon in tissue response to implanted devices, and an important consideration in tissue engineering. For example, elucidation of phenomena associated with adhesion of chondrocytes to biomaterials is critical in addressing the difficult problem of articular cartilage regeneration. The first objective of this study was to measure the mechanical adhesiveness characteristics of individual rabbit articular chondrocytes as a function of seeding time to provide further understanding of the cell adhesion process. The second objective was to quantify the force required to separate the plasma membrane from the underlying cytoskeleton as a function of seeding time. After culturing chondrocytes on glass coverslips for 1, 2, 4, 6 h, two biomechanical tests were performed on single chondrocytes: (i) mechanical adhesiveness measurement by the cytodetacher; and (ii) plasma membrane tether formation force measurement by optical tweezers. Cell mechanical adhesiveness increased from 231+/-149 Pa at 1 h to 1085+/-211 Pa at 6 h. The cell contact area with the substrata increased from 161+/-52 microm(2) at 1 h to 369+/-105 microm(2) at 6 h. The tether formation force increased from 232+/-23 pN at 1 h to 591+/-17 pN at 6 h. Moreover, fluorescence staining by rhodamine-phalloidin demonstrated the process of actin spreading within the cytoskeleton from 0.5 to 6 h and allowed for measurement of cell height which was found to decrease from 12.3+/-2.9 microm at 0.5 h to 6.2+/-0.9 microm at 6 h.

Methodology for estimation of time-dependent surface heat flux due to cryogen spray cooling.

Cryogen spray cooling (CSC) is an effective technique to protect the epidermis during cutaneous laser therapies. Spraying a cryogen onto the skin surface creates a time-varying heat flux, effectively cooling the skin during and following the cryogen spurt. In previous studies mathematical models were developed to predict the human skin temperature profiles during the cryogen spraying time. However, no studies have accounted for the additional cooling due to residual cryogen left on the skin surface following the spurt termination. We formulate and solve an inverse heat conduction (IHC) problem to predict the time-varying surface heat flux both during and following a cryogen spurt. The IHC formulation uses measured temperature profiles from within a medium to estimate the surface heat flux. We implement a one-dimensional sequential function specification method (SFSM) to estimate the surface heat flux from internal temperatures measured within an in vitro model in response to a cryogen spurt. Solution accuracy and experimental errors are examined using simulated temperature data. Heat flux following spurt termination appears substantial; however, it is less than that during the spraying time. The estimated time-varying heat flux can subsequently be used in forward heat conduction models to estimate temperature profiles in skin during and following a cryogen spurt and predict appropriate timing for onset of the laser pulse.

Membrane tether formation from outer hair cells with optical tweezers.

Optical tweezers were used to characterize the mechanical properties of the outer hair cell (OHC) plasma membrane by pulling tethers with 4.5-microm polystyrene beads. Tether formation force and tether force were measured in static and dynamic conditions. A greater force was required for tether formations from OHC lateral wall (499 +/- 152 pN) than from OHC basal end (142 +/- 49 pN). The difference in the force required to pull tethers is consistent with an extensive cytoskeletal framework associated with the lateral wall known as the cortical lattice. The apparent plasma membrane stiffness, estimated under the static conditions by measuring tether force at different tether length, was 3.71 pN/microm for OHC lateral wall and 4.57 pN/microm for OHC basal end. The effective membrane viscosity was measured by pulling tethers at different rates while continuously recording the tether force, and estimated in the range of 2.39 to 5.25 pN x s/microm. The viscous force most likely results from the viscous interactions between plasma membrane lipids and the OHC cortical lattice and/or integral membrane proteins. The information these studies provide on the mechanical properties of the OHC lateral wall is important for understanding the mechanism of OHC electromotility.

Manejo profiláctico con antibióticos en neurocirugía (cefataxima vs. cefuroxima) / Prophylactic management using antimicrobial drugs in neurosurgery (cefotaxime vs. cefuroxime)

Objetivo: Determinar la eficacia de dos antibióticos (cefotaxima vs. cefuroxima) en la profilaxis de infecciones posquirúrgicas en cirugías limpias y limpias contaminadas en pacientes neuroquirúrgicos. Material y métodos: En el servicio de neurocirugía se realizaron 136 intervenciones quirúrgicas entre los meses de octubre a noviembre de 1994. Los criterios de inclusión fueron: ausencia de infección en otro órgano, cirugía limpia o limpia contamida, sin colocación de material sintético (DVP o craneoplastic). Los pacientes se dividieron en dos grupos: a los del grupo A se les dio cefotaxima y a los del B cefuroxima. Los antibióticos se prescribieron durante un periodo no mayor de 24 horas. La primera dosis de aplicó en el transcurso de la hora previa al inicio de la operación y cada cuatro horas durante la misma. La última dosis se administró cuatro horas después de terminada la intervención. La cefotaxima se aplicó a la dosis de un gramo cada vez y la cefuroxima a 750 mg por dosis. En los pacientes pediátricos la dosis se ajustó a 30 mg/kg de peso en ambos grupos. Resultados: Se incluyeron 54 pacientes, 28 del sexo masculino y 26 del femenino. El rango de edad fue de 3 a 75 años. Cada grupo estuvo conformado por 27 pacientes. Los procedimientos quirúrgicos fueron 33 craneotomías, nueve craniectomías suboccipitales, cinco transesfenoidales y siete espinales. El tiempo quirúrgico varió de 2 a 8 horas. El tiempo de utilización del microscopio fue, en promedio, de dos horas. Sólo hubo un caso de infección superficial en el grupo de la cefuroxima. No hubo diferencia estadísticamente significaiva entre los dos antibióticos utilizados (p exacta de Fisher = 0.5). conclusión: la incidencia de infecciones posquirúrgicas (limpias contaminadas) en neurocirugía es baja (3.7 por ciento). La profilaxis antibiótica puede usarse durante un tiempo menor de 24 horas. No hubo diferencia en la eficacia de los antibióticos utilizados, por lo que consideramos que es posible utilizar un antibiótico de menor costo y de mejor espectro contra gérmenes grampositivos (Staphylococcus aureus), como la cefuroxima, en el profilaxis de pacientes neuroquirúrgicos