ABSTRACT
Data-enabled approaches that complement experimental testing offer new capabilities to investigate the interplay between chemical, physical and mechanical attributes of alloys and elucidate their effect on biological behaviours. Reported here, instead of physical causation, statistical correlations were used to study the factors responsible for the adhesion, proliferation and maturation of pre-osteoblasts MC3T3-E1 cultured on Titanium alloys. Eight alloys with varying wt% of Niobium, Zirconium, Tin and Tantalum (Ti- (2-22 wt%)Nb- (5-20 wt%)Zr- (0-18 wt%)Sn- (0-14 wt%)Ta) were designed to achieve exemplars of allotropes (incl., metastable-ß, ß + α', αâ³). Following confirmation of their compositions (ICP, EDX) and their crystal structure (XRD, SEM), their compressive bulk properties were measured and their surface features characterised (XPS, SFE). Because these alloys are intended for the manufacture of implantable orthopaedic devices, the correlation focuses on the effect of surface properties on cellular behaviour. Physico-chemical attributes were paired to biological performance, and these highlight the positive interdependencies between oxide composition and proliferation (esp. Ti4+), and maturation (esp. Zr4+). The correlation reveals the negative effect of oxide thickness, esp. TiOx and TaOx on osteoblastogenesis. This study also shows that the characterisation of the chemical state and elemental electronic structure of the alloys' surface is more predictive than physical properties, namely SFE and roughness.
Subject(s)
Alloys , Oxides , Alloys/pharmacology , Prostheses and Implants , PressureABSTRACT
Numerical design of TiNbTaZrMoSn alloy preceded its manufacture and mechanical, physico-chemical and in vitro characterisation. The specifications of the alloy required a multi-objective optimisation including lower modulus of elasticity than c.p.Ti, high strength, stabilised ß crystal structure with a low martensitic start temperature, a narrow solidification range and high biocompatibility. The results reveal that there was a good match between the bulk mechanical properties exhibited by the alloy experimentally and those predicted. Regarding surface properties, independent of roughness effects, the oxide thickness and surface zeta-potential, measured in biologically relevant electrolytes and at physiological pH, arose as important factors in osteoblastic activity (i.e., cell proliferation, measured via DNA, protein and metabolite content, and differentiation, via ALP levels), but not in cell adhesion and viability. The thinner oxide layer and lower absolute value of surface zeta-potential on the TiNbTaZrMoSn alloy explain its lesser osteogenic properties (i.e., inhibition of ALP activity) compared to the c.p. Ti. This study demonstrates that the numerical models to predict microstructure and bulk mechanical properties of ß-Ti alloys are robust, but that the prediction of cellular bioactivity lags behind and still requires parameterisation to account for features such as oxide layer composition and thickness, electro-chemical properties and surface charge, and topography to optimise cell response in silico before committing to the costly manufacture and deployment of these alloys in regenerative medicine.
Subject(s)
Alloys , Titanium , Biocompatible Materials/pharmacology , Computer Simulation , Materials Testing , Osteogenesis , Surface PropertiesABSTRACT
Titanium porous scaffolds comprising multimodal pore ranges (i.e., uni-, bi-, tri-modal and random) were studied to evaluate the effect of pore size on osteoblastogenesis. The scaffolds were manufactured using spaceholder-powder metallurgy, and porosity and pore size were kept independent. Their mechanical and physical properties (i.e., stiffness, strength, total and open porosity) were determined. In a first step, unimodal porous samples were tested with a mouse osteoblastic clonal cell line to ascertain pore size and porosity effects on cellular behaviour. Their proliferation (via cell number and total protein content), differentiation (via ALP enzyme levels) and maturation potency (with gene markers (Runx2, osteocalcin) and cytoplasmatic calcium) were investigated. In a second step informed by the previous results, multimodal scaffolds were shortlisted according to a set of criteria that included stiffness similar to that of cortical or trabecular bone, high strength and high open porosity. Their bioactivity performance was then studied to assess the benefits of mixing different pore ranges. The study concludes that pre-osteoblasts cultivated in unimodal microstructures with a pore range 106-212 µm of 36% total (actual) porosity and 300-500 µm of 55% total (actual) porosity achieved the largest extent of maturation. Bimodal microstructures comprising small (106-212 µm) and large (300-500 µm) pore ranges, distinctively distributed within the volume, and 40% (actual) porosity outperformed others, including multimodal (i.e. three or more pore ranges) and non-porous samples. They displayed a synergistic effect over the unimodal distributions. This should be a consideration in the design of scaffolds for implantation and bioengineering applications.
Subject(s)
Osteogenesis , Titanium , Animals , Cell Proliferation , Mice , Osteoblasts , Porosity , Tissue Scaffolds , Titanium/pharmacologyABSTRACT
Titanium (Ti) alloys with Niobium (Nb) and Tin (Sn) were prepared in order to conduct a systematic study on the bulk and surface properties of as-cast c.p.Ti, binary Ti-40Nb and Ti-10Sn, and ternary Ti-10Nb-5Sn (at.%) to ascertain whether Sn content can be used as an enhancer for cell activity. From a metallurgy viewpoint, a range of binary and ternary alloys displaying distinctive Ti phases (i.e. ß, α', α") were achieved at room temperature. Their surface (oxide thickness and composition, roughness, contact angle) and bulk (compressive stiffness, strength, elongation, microhardness, electrical resistance) features were characterised. The same surface roughness was imparted on all the alloys, therefore substrate-cell interactions were evaluated independently from this variable. The physico-mechanical properties of the ternary alloy presented the highest strength to stiffness ratio and thereby proved the most suitable for load-bearing orthopaedic applications. From a cellular response viewpoint, their cytotoxicity, ability to adsorb proteins, to support cell growth and to promote proliferation were studied. Metabolic activity using a mouse model was monitored for a period of 12â¯days to elucidate the mechanism behind an enhanced proliferation rate observed in the Sn-containing alloys. It was hypothesised that the complex passivating surface oxide layer and the bulk inhomogeneity with two dominant Ti phases were responsible for this phenomenon.
Subject(s)
Alloys/chemical synthesis , Niobium/chemistry , Tin/chemistry , Titanium/chemistry , Alloys/chemistry , Alloys/pharmacology , Animals , Cell Line , Cell Proliferation/drug effects , Materials Testing , Mice , Microscopy, Electron, Scanning , Surface PropertiesABSTRACT
No disponible
Subject(s)
Humans , Female , Adult , Dermatitis, Contact/diagnosis , Dermatitis, Contact/drug therapy , Histamine Antagonists/administration & dosage , Adrenal Cortex Hormones/administration & dosage , Dermoscopy/instrumentation , Lepidoptera , Erythema/diagnosis , Administration, TopicalSubject(s)
Dermatitis, Contact/parasitology , Lepidoptera , Adult , Animals , Dermatitis, Contact/diagnosis , Female , Humans , LarvaABSTRACT
The effect of pore size and porosity on elastic modulus, strength, cell attachment and cell proliferation was studied for Ti porous scaffolds manufactured via powder metallurgy and sintering. Porous scaffolds were prepared in two ranges of porosities so that their mechanical properties could mimic those of cortical and trabecular bone respectively. Space-holder engineered pore size distributions were carefully determined to study the impact that small changes in pore size may have on mechanical and biological behaviour. The Young's moduli and compressive strengths were correlated with the relative porosity. Linear, power and exponential regressions were studied to confirm the predictability in the characterisation of the manufactured scaffolds and therefore establish them as a design tool for customisation of devices to suit patients' needs. The correlations were stronger for the linear and the power law regressions and poor for the exponential regressions. The optimal pore microarchitecture (i.e. pore size and porosity) for scaffolds to be used in bone grafting for cortical bone was set to <212µm with volumetric porosity values of 27-37%, and for trabecular tissues to 300-500µm with volumetric porosity values of 54-58%. The pore size range 212-300µm with volumetric porosity values of 38-56% was reported as the least favourable to cell proliferation in the longitudinal study of 12days of incubation.
Subject(s)
Titanium/chemistry , Compressive Strength , Elastic Modulus , Longitudinal Studies , PorosityABSTRACT
A variety of materials require functionally graded cellular microstructures whose porosity is engineered to meet specific applications (e.g. mimic bone structure for orthopaedic applications; fulfil mechanical, thermal or acoustic constraints in structural foamed components, etc.). Although a huge variety of foams can be manufactured with homogenous porosity, there are no generic processes for controlling the distribution of porosity within the resulting matrix. Motivated by the desire to create a flexible process for engineering heterogeneous foams, the authors have investigated how ultrasound, applied during the formation of a polyurethane foam, affects its cellular structure. The experimental results demonstrated how the parameters of ultrasound exposure (i.e. frequency and applied power) influenced the volume and distribution of pores within the final polyurethane matrix: the data demonstrates that porosity (i.e. volume fraction) varies in direct proportion to both the acoustic pressure and frequency of the ultrasound signal. The effects of ultrasound on porosity demonstrated by this work offer the prospect of a manufacturing process that can adjust the cellular geometry of foam and hence ensure that the resulting characteristics match the functional requirements.
Subject(s)
Polymers/chemistry , Polymers/radiation effects , Porosity/radiation effects , Polyurethanes/chemistry , Polyurethanes/radiation effects , UltrasonicsABSTRACT
Numerous applications in mechanical CAD/CAM need robust algorithms for the identification of protrusion and depression features (DP-features) on geometric models with free-form (B-Spline) surfaces. This paper reports a partitioning algorithm that first identifies the boundary edges of DP-features and then creates a surface patch to cover the depressions or isolate the protrusions. The novelty of the method lies in the use of tangent continuity between edge segments to identify DP-feature boundaries that cross multiple faces and geometries.
Subject(s)
Algorithms , Artificial Intelligence , Image Interpretation, Computer-Assisted/methods , Imaging, Three-Dimensional/methods , Information Storage and Retrieval/methods , Pattern Recognition, Automated/methods , Computer-Aided Design , Equipment Design/methods , Image Enhancement/methodsABSTRACT
En el presente trabajo, hemos realizado un estudio de los hallazgos histopatológicos en las diferentes causas de fallecimiento, estableciendo como hipótesis de trabajo el hecho de que, la fisiopatología del miocardio debe reflejar los procesos cuantitativos y cualitativos que determinan el fallecimiento, ajustándose a la naturaleza del sufrimiento isquémico y/o anóxico (localizado o generalizado) y a la duración del mismo. Hemos estudiado un total de 59 cadáveres, 43 varones y 16 mujeres, de los cuales, 40 fallecieron por causas traumáticas y los 19 restantes por causas no traumáticas. Sus edades estaban comprendidas entre los 17 y 90 años, con una edad media de 51,31 años, y una media del intervalo postmortem de 13,68 horas (DS 8,7; rango 3-59 horas). Para el estudio histopatol6gico, se tomaron muestras de tejido cardíaco procedentes de: apex, cara anterior, lateral y posterior del ventrículo izquierdo, cara lateral del ventrículo derecho y zona medial del tabique interventricular, en dos niveles diferentes del corazón. Tras la fijación de las muestras y procesado, se tiñeron con hematoxilina-eosina y con naranja de acridina. Los resultados obtenidos, se sometieron a un estudio estadístico mediante el paquete estadístico SPSS.10.0 Nuestros resultados corroboran la utilidad de la técnica de la hematoxilina eosina para detectar la existencia de patología cardíaca previa al hecho causal del fallecimiento, mientras que la del naranja de acridina es útil para detectar lesiones isquémicas en aquellas localizaciones donde los procesos de perfusión del músculo cardíaco van a verse más afectados, corroborando los hallazgos descritos en la bibliografía (AU)