ABSTRACT
RESUMO No processo de urbanização, o aumento na proporção de superfícies impermeabilizadas e as mudanças no uso do solo são responsáveis por maiores volumes e velocidades do escoamento superficial, refletindo em uma maior capacidade de arraste e em um maior aporte de nutrientes nos corpos d'água receptores. O objetivo deste trabalho foi implementar uma ferramenta matemática capaz de reproduzir o impacto de mudanças na bacia hidrográfica sobre a dinâmica do fitoplâncton em um lago urbano. Neste artigo são apresentados o desenvolvimento e os resultados de um modelo integrado constituído de um modelo hidrológico, para simular vazões escoadas em uma bacia hidrográfica, e de um modelo hidrodinâmico e ecológico, para simular a biomassa fitoplanctônica em um corpo d'água urbano. A Lagoa da Pampulha (Belo Horizonte, Minas Gerais), escolhida como estudo de caso, foi intensamente monitorada, assim como sua bacia de drenagem, entre outubro de 2011 e junho de 2013. Os dados obtidos foram utilizados para calibrar e validar ambos os modelos. Os resultados obtidos com o modelo hidrológico mostraram-se coerentes com as medidas realizadas em campo (o coeficiente de Nash variou entre 0,70 e 0,88). O modelo da lagoa representou corretamente a evolução da comunidade fitoplanctônica (erro médio absoluto normalizado: 0,25-0,42 e o coeficiente de Pearson: 0,82-0,89; p<0,0001). O monitoramento e a modelagem da lagoa mostraram que a proliferação de cianobactérias é bastante perturbada pelas desestratificações térmicas que ocorrem na lagoa em virtude de eventos meteorológicos. A ferramenta de simulação desenvolvida possui potencial para avaliar diferentes cenários de mudança das condições climáticas e das características da bacia, podendo auxiliar na gestão dos corpos d'água situados em meio urbano.
ABSTRACT In urban areas the increasing imperviousness is responsible for rising runoff volume and speed, leading to a greater capacity to load nutrients and pollutants into reservoirs. In order to study the impacts of catchment changes on the phytoplankton dynamics in urban lakes, a modelling approach in which a hydrological model is connected to an ecological lake model is proposed for Lake Pampulha (Brazil). In this paper we present the methodology used to link both models. Lake Pampulha and its catchment area were intensively monitored between October 2011 and June 2013 in order to provide data for the calibration and validation of both models. The results of the hydrologic model showed good agreement with the in situ measurements, and the Nash coefficient ranged from 0.70 to 0.88. The lake ecological model have successfully represented the cyanobacteria dynamics (normalized mean average error: 0.25-0.42, Pearson coefficient: 0.82-0.89, p<0.0001). Monitoring and modelling showed that cyanobacteria blooms are quite disturbed by water column mixing caused by rain events. The mathematical tool developed here can be used to assess different scenarios of climate changes or catchment area changes and can be very helpful for the management of urban water resources.
ABSTRACT
We developed a biological sulphide oxidation system and evaluated two reactors (shaped similar to the settler compartment of an up-flow anaerobic sludge blanket [UASB] reactor) with different support materials for biomass retention: polypropylene rings and polyurethane foam. The start-up reaction was achieved using microorganisms naturally occurring on the open surface of UASB reactors treating domestic wastewater. Sulphide removal efficiencies of 65% and 90% were achieved with hydraulic retention times (HRTs) of 24 and 12 h, respectively, in both reactors. However, a higher amount of elemental sulphur was formed and accumulated in the biomass from reactor 1 (20 mg S(0) g(-1) VTS) than in that from reactor 2 (2.9 mg S(0) g(-1) VTS) with an HRT of 24 h. Denaturing gradient gel electrophoresis (DGGE) results revealed that the the pink and green biomass that developed in both reactors comprised a diverse bacterial community and had sequences related to phototrophic green and purple-sulphur bacteria such as Chlorobium sp., Chloronema giganteum, and Chromatiaceae. DGGE band patterns also demonstrated that bacterial community was dynamic over time within the same reactor and that different support materials selected for distinct bacterial communities. Taken together, these results indicated that sulphide concentrations of 1-6 mg L(-1) could be efficiently removed from the effluent of a pilot-scale UASB reactor in two sulphide biological oxidation reactors at HRTs of 12 and 24 h, showing the potential for sulphur recovery from anaerobically treated domestic wastewater.
