Performance assessment of new multiplex probe assay for identification of mycobacteria.

A new DNA probe assay (INNO LiPA Mycobacteria; Innogenetics, Ghent, Belgium) for the simultaneous identification, by means of reverse hybridization and line-probe technology, of Mycobacterium tuberculosis complex, Mycobacterium kansasii, Mycobacterium xenopi, Mycobacterium gordonae, the species of the Mycobacterium avium complex (MAC), Mycobacterium scrofulaceum, and Mycobacterium chelonae was evaluated on a panel of 238 strains including, besides representatives of all the taxa identifiable by the system, a number of other mycobacteria, some of which are known to be problematic with the only other commercial DNA probe system (AccuProbe; Gen-Probe, San Diego, Calif.), and two nocardiae. The new kit, which includes a control probe reacting with the whole genus Mycobacterium, correctly identified 99.6% of the strains tested; the one discrepancy, which remained unresolved, concerned an isolate identified as MAC intermediate by INNO LiPA Mycobacteria and as Mycobacterium intracellulare by AccuProbe. In five cases, because of an imperfect checking of hybridization temperature, a very slight, nonspecific, line was visible which was no longer evident when the test was repeated. Two strains whose DNA failed amplification at the first attempt were regularly identified when the test was repeated. Interestingly, the novel kit dodged all the pitfalls presented by the strains giving anomalous reactions with AccuProbe. A unique feature of INNO LiPA Mycobacteria is its ability to recognize different subgroups within the species M. kansasii and M. chelonae, while the declared overlapping reactivity of probe 4 with some M. kansasii and Mycobacterium gastri organisms and of probe 9 with MAC, Mycobacterium haemophilum, and Mycobacterium malmoense, may furnish a useful aid for their identification. The turnaround time of the method is approximately 6 h, including a preliminary PCR amplification.

Comparison of MB/Bact alert 3D system with radiometric BACTEC system and Löwenstein-Jensen medium for recovery and identification of mycobacteria from clinical specimens: a multicenter study.

The MB/BacT ALERT 3D System (MB/BacT) (Organon Teknika, Boxtel, The Netherlands) is a fully automated, nonradiometric system with a revised antibiotic supplement kit designed for the recovery of mycobacteria from clinical specimens. In a multicenter study, the recovery rate of acid-fast bacilli (AFB) and the mean time to their detection from clinical specimens was determined by using the MB/BacT system. Data were compared to those assessed by the radiometric BACTEC 460 system (B460) and by culture on Löwenstein-Jensen (L-J) solid medium. A total of 2,859 respiratory and extrapulmonary specimens were processed by the N-acetyl-L-cysteine (NALC)-NaOH method using two different concentrations of sodium hydroxide; 1.5% was adopted in study design A (1,766 specimens), and 1.0% was used in study design B (1,093 specimens). The contamination rates for MB/BacT were 4.6% (study design A) and 7.1% (study design B). One hundred seventy-nine mycobacterial isolates were detected by study design A, with 148 Mycobacterium tuberculosis complex (MTB) isolates and 31 nontuberculous mycobacteria (NTM) isolates. Overall recovery rates were 78.8% for MB/BacT (P = 0.0049), 64.2% for L-J (P < 0.0001), and 87.1% for B460, whereas they were 84.5, 70.9, and 91.2%, respectively, for MTB alone. A total of 125 mycobacteria were detected by study design B, with 46 MTB and 79 NTM. Overall recovery rates by the individual systems were 57.6% (P = 0.0002), 56.8% (P = 0.0001), and 80% for MB/BacT, L-J, and B460, respectively, whereas the rates were 91.3, 78.3, and 97.8% for MTB alone. By study design A, the mean times to detection of smear-positive MTB, smear-negative MTB, and NTM were 11.5, 19.9, and 19.6 days, respectively, with the MB/BacT; 8.3, 16.8, and 16.6 days, respectively, with the B460; and 20.6, 32.1, and 27.8 days, respectively, with L-J medium. By study design B, the mean times were 15.1, 26.7, and 26 days with the MB/BacT; 11.7, 21.3, and 24.8 days with the B460; and 20.4, 28.7, and 28.4 days with L-J medium. Identification was attempted by probing (Accuprobe) MB/BacT-positive bottles within the first working day following instrument positive flag. Results were compared to those obtained in the B460 positive vials by the p-nitro-alpha-acetylamino-beta-hydroxypropiophenone (NAP) test (study design A) or by the Accuprobe assay (study design B). About 90% of MTB and 100% of NTM could be identified, showing turnaround times closely related to those obtained by combining B460 and the NAP test or the Accuprobe assay. In conclusion, even though recovery rates were shown to be lower than B460, especially for NTM, and contaminants were somewhat higher, MB/BacT represents a valuable alternative to the radiometric system, especially in those laboratories where disposal of radioactive waste is restricted. Finally, when AFB are cultured in nonradiometric liquid media, our data (detection times and bacterial overgrowth rates) suggest that decontamination with 1.5% NaOH may be more suitable than the standard NALC-NaOH.

Multicenter evaluation of two commercial amplification kits (Amplicor, Roche and LCx, Abbott) for direct detection of Mycobacterium tuberculosis in pulmonary and extrapulmonary specimens.

Direct detection of Mycobacterium tuberculosis was performed in parallel with the Amplicor M. tuberculosis test (Roche Diagnostic System, USA) and the LCx M. tuberculosis (Abbott Diagnostic Division, USA) on 697 samples, collected from 481 patients, in three different Italian laboratories. Though both systems are licensed only for pulmonary specimens, 113 extrapulmonary specimens (represented mainly by pleural fluids, cerebrospinal fluids and urines) were included in the study. Amplification results were compared with acid-fast microscopy, culture, and identification of isolates. Final clinical diagnosis was used to resolve discrepant results. M. tuberculosis was detected in 105 specimens by both assays, whereas 561 were agreeing negatives; 21 and 6 of the remaining true-positive samples scored positive with LCx only and with Amplicor only, respectively. There were three false-positives with LCx and one false-positive with Amplicor. The diagnostic sensitivity of both methods was significantly better when only respiratory specimens were considered (78% versus 59% in nonrespiratory samples with Amplicor, and 88% versus 65% with LCx). Our data reveal a significantly better sensitivity of the LCx (p = 0.026) and a slight better specificity of the Amplicor assay. It is noteworthy that 16 of the 21 Amplicor-negative specimens in which LCx detected M. tuberculosis were culture negative, thus suggesting that the higher diagnostic sensitivity of the latter assay is attributable to its better analytical sensitivity. However, the majority of such samples originated from patients under antimicrobial treatment, which makes uncertain the clinical significance of such increased sensitivity. Considering true-positive for LCx and true-negative for Amplicor, the 16 culture-negative/LCx-positive/Amplicor-negative specimens resulted true-positives after the resolution of discrepancies, the final overall sensitivity and specificity values of the LCx assay were not significantly different from the ones of the Amplicor assay.

Mycobacterium malmoense in Italy: the modern Norman invasion?

The isolation of Mycobacterium malmoense has for a long time been restricted to few countries of Northern Europe; reports from countries other than Sweden, Great Britain and Finland are rare and the first Italian case report has been published in 1995. Since 1988, however, fifteen strains of M. malmoense have been isolated in Italy, eleven of which in the last two years; of these, ten appeared clinically significant on the basis of medical records. The susceptibility of the strains and the role of high performance liquid chromatography of cell wall mycolic acids for a reliable identification are discussed.

Characterization of mycobacterial isolates phylogenetically related to, but different from Mycobacterium simiae.

The use of high-performance liquid chromatography (HPLC) revealed four previously unreported profiles within a group of mycobacteria consisting of 14 clinical isolates. These mycobacteria, whose identification by conventional tests appeared problematic, mostly resembled Mycobacterium avium complex or Mycobacterium simiae. Genetic analysis revealed, within this group, six different nucleic acid sequences in a hypervariable 16S rRNA segment, but all the isolates appeared to be phylogenetically related to M. simiae. Six isolates representing the largest of groups defined by means of genetic sequencing turned out to belong to the newly described species Mycobacterium lentiflavum. Furthermore, three such clusters precisely coincided with three of those defined by HPLC, while the three remaining clusters shared almost identical HPLC profiles. All but one strain (which, although clearly not belonging to the M. avium complex, hybridized with specific commercial DNA probes) showed high-grade resistance to the majority of antimycobacterial drugs. Three of the isolates were clinically significant according to stringent criteria. Sophisticated techniques, like genetic sequencing or HPLC, by now seem indispensable for differentiating unusual and new mycobacteria from well-established ones.

[Isolation of thymidine-dependent strains. Microbiologic considerations and personal observations]. / Isolamento di ceppi timidino-dipendenti. Considerazioni microbiologiche ed osservazioni personali.

We describe the emergence of three thymidine-dependent strains (Thy-): two Escherichia coli obtained in successive occasions from urine of a woman treated with co-trimoxazole before the organisms were isolated and one Proteus mirabilis obtained from urine of a man who had a treatment with norfloxacin. Cultural characteristics and methods for the detection of these Thy- strains are given.