ABSTRACT
Determining real-time changes in the local atomistic order is important for a mechanistic understanding of shock wave induced structural and chemical changes. However, the single event and short duration (nanosecond times) nature of shock experiments pose challenges in obtaining Extended X-ray Absorption Fine Structure (EXAFS) measurements-typically used for monitoring local order changes. Here, we report on a new single pulse (â¼100 ps duration) transmission geometry EXAFS capability for use in laser shock-compression experiments at the Dynamic Compression Sector (DCS), Advanced Photon Source. We used a flat plate of highly oriented pyrolytic graphite (HOPG) as the spectrometer element to energy disperse x rays transmitted through the sample. It provided high efficiency with â¼15% of the x rays incident on the HOPG reaching an x-ray area detector with high quantum efficiency. This combination resulted in a good signal-to-noise ratio (â¼103), an energy resolution of â¼10 eV at 10 keV, EXAFS spectra covering 100 s of eV, and a good pulse to pulse reproducibility of our single pulse measurements. Ambient EXAFS spectra for Cu and Au are compared to the reference spectra, validating our measurement system. Comparison of single pulse EXAFS results for ambient and laser shocked Ge(100) shows large changes in the local structure of the short lived state of shocked Ge. The current DCS EXAFS capability can be used to perform single pulse measurements in laser shocked materials from â¼9 keV to 13 keV. These EXAFS developments will be available to all users of the DCS.
ABSTRACT
The Laser Shock Station in the Dynamic Compression Sector (DCS) [Advanced Photon Source (APS), Argonne National Laboratory] links a laser-driven shock compression platform with high energy x-ray pulses from the APS to achieve in situ, time-resolved x-ray measurements (diffraction and imaging) in materials subjected to well-characterized, high stress, short duration shock waves. This station and the other DCS experimental stations provide a unique and versatile facility to study condensed state phenomena subjected to shocks with a wide range of amplitudes (to above â¼350 GPa) and time-durations (â¼10 ns-1 µs). The Laser Shock Station uses a 100 J, 5-17 ns, 351 nm frequency tripled Nd:glass laser with programmable pulse shaping and focal profile smoothing for maximum precision. The laser can operate once every 30 min. The interaction chamber has multiple diagnostic ports, a sample holder to expose 14 samples without breaking vacuum, can vary the angle between the x-ray and laser beams by 135°, and can translate to select one of the two types of x-ray beams. The x-ray measurement temporal resolution is â¼90 ps. The system is capable of reproducible, well-characterized experiments. In a series of 10 shots, the absolute variation in shock breakout times was less than 500 ps. The variation in peak particle velocity at the sample/window interface was 4.3%. This paper describes the entire DCS Laser Shock Station, including sample fabrication and diagnostics, as well as experimental results from shock compressed tantalum that demonstrate the facility's capability for acquiring high quality x-ray diffraction data.
ABSTRACT
We present experimental results of reflectance and transmittance measurements of infrared radiation by high-density photogenerated free carriers in polycrystalline germanium, polycrystalline silicon, and chemical vapor deposition zinc selenide windows. Linearly polarized 1064 and 532 nm wavelength light from a Nd:YAG laser with a 130 ps pulse width were used to generate free carriers in the samples. Reflectance and transmittance were measured at a 10.6 microm wavelength using a linearly polarized CO2 laser.