Comprehensive Metabolite Profiling of Hydrangea macrophylla ssp. serrata Extracts Using Liquid Chromatography Coupled with Electrospray Ionization Ion Mobility Quadrupole Time-of-Flight Mass Spectrometry.

A wide range of secondary metabolites has been described for various Hydrangea species, including the sweet-tasting phenyldihydroisocoumarin phyllodulcin, which is found in the leaves of Hydrangea macrophylla ssp. serrata. This work aims at the development and validation of an analytical workflow for comprehensive semi-polar metabolite profiling using liquid chromatography coupled with electrospray ionization ion mobility quadrupole time-of-flight mass spectrometry (UPLC-ESI-IMS-QToF-MS) to complement existing analytical studies. The unsupervised analysis of this data set demonstrates the capability of this analytical workflow to distinguish different H. macrophylla ssp. serrata cultivars. In combination with supervised analysis, a list of metabolites responsible for the differentiation of the cultivars studied has been obtained. Suspect screening of phenyldihydroisocoumarins provides comprehensive information, which could help in the search for key enzymes related to the biosynthesis of phyllodulcin.

Targeted generation of polyploids in Hydrangea macrophylla through cross-based breeding.

BACKGROUND: Up to now, diploid and triploid cultivars were reported for the ornamental crop Hydrangea macrophylla. Especially, the origin of triploids and their crossing behaviors are unknown, but the underlying mechanisms are highly relevant for breeding polyploids. RESULTS: By screening a cultivar collection, we identified diploid, triploid, tetraploid and even aneuploid H. macrophylla varieties. The pollen viability of triploids and tetraploids was comparable to that of diploids. Systematic crosses with these cultivars resulted in viable diploid, triploid, tetraploid and aneuploid offspring. Interestingly, crosses between diploids produced diploid and 0 or 1-94% triploid offspring, depending on the cultivars used as pollen parent. This finding suggests that specific diploids form unreduced pollen, either at low or high frequencies. In contrast, crosses of triploids with diploids or tetraploids produced many viable aneuploids, whose 2C DNA contents ranged between the parental 2C values. As expected, crosses between diploid and tetraploid individuals generated triploid offspring. Putative tetraploid plants were obtained at low frequencies in crosses between diploids and in interploid crosses of triploids with either diploid or tetraploid plants. The analysis of offspring populations indicated the production of 1n = 2x gametes for tetraploid plants, whereas triploids produced obviously reduced, aneuploid gametes with chromosome numbers ranging between haploid and diploid level. While euploid offspring grew normally, aneuploid plants showed mostly an abnormal development and a huge phenotypic variation within offspring populations, most likely due to the variation in chromosome numbers. Subsequent crosses with putative diploid, triploid and aneuploid offspring plants from interploid crosses resulted in viable offspring and germination rates ranging from 21 to 100%. CONCLUSIONS: The existence of diploids that form unreduced pollen and of tetraploids allows the targeted breeding of polyploid H. macrophylla. Different ploidy levels can be addressed by combining the appropriate crossing partners. In contrast to artificial polyploidization, cross-based polyploidization is easy, cheap and results in genetically variable offspring that allows the direct selection of more robust and stress tolerant polyploid varieties. Furthermore, the generation of polyploid H. macrophylla plants will favor interspecific breeding programs within the genus Hydrangea.

Rapid identification of inflorescence type markers by genotyping-by-sequencing of diploid and triploid F1 plants of Hydrangea macrophylla.

BACKGROUND: The ornamental crop Hydrangea macrophylla develops highly attractive lacecap (wild type) or mophead inflorescences. The mophead trait, which is mostly favored by consumers, is recessively inherited by the INFLORESCENCE TYPE locus (INF). If lacecap cultivars are crossed with mophead cultivars, then either 50% or all progenies develop lacecap inflorescences, depending on the zygosity at the INF locus. For most cultivars, the zygosity at the INF locus is unknown. Furthermore, the determination of the inflorescence type in offspring populations is time-consuming, because seedlings flower the first time in the 2nd year after sowing. Within this study, we aimed to develop DNA-based markers that allow to determine the zygosity at the INF locus of prospective parental plants and to predict the inflorescence phenotype of seedlings already in the non-flowering stage. RESULTS: By crossing a mophead and a lacecap cultivar of H. macrophylla, we produced a pseudo-backcross F1 population consisting of 422 plants. These plants segregated into 279 lacecap, 73 mophead, 3 intermediate and 67 non-flowering plants, differing significantly from the expected 1:1 segregation ratio. Surprisingly, 75% of these plants were triploid, although both parents were diploid. We found that the lacecap parent produced unreduced pollen, which induced the formation of triploids. 380 randomly selected F1 plants were genotyped by genotyping-by-sequencing (GbS). Using a genome assembly of cultivar 'Sir Joseph Banks', we performed subsequently a bulk sequence analysis with pooled GbS data of diploid versus mophead plants. We identified directly 2 markers tightly linked with the INF locus, each of them explaining 99.7% of the inflorescence phenotype. Using a collection consisting of 56 diploid, triploid or tetraploid H. macrophylla varieties, we detected 6 sequence variants for one of these markers. Two variants were associated with the mophead phenotype. Furthermore, we found by marker analysis a co-segregation between the mophead and the non-flowering trait, which indicates a major flowering time locus next to the INF locus. CONCLUSION: Through bulk sequence analysis of pooled GbS data from diploid and polyploid F1 plants, we identify rapidly tightly linked markers for the inflorescence type, a dominant-recessively inherited trait in the non-model plant species H. macrophylla.

Molecular Reconstruction of an Old Pedigree of Diploid and Triploid Hydrangea macrophylla Genotypes.

The ornamental crop species Hydrangea macrophylla exhibits diploid and triploid levels of ploidy and develops lacecap (wild type) or mophead inflorescences. In order to characterize a H. macrophylla germplasm collection, we determined the inflorescence type and the 2C DNA content of 120 plants representing 43 cultivars. We identified 78 putative diploid and 39 putative triploid plants by flow cytometry. In our collection 69 out of 98 flowering plants produced lacecap inflorescences, whereas 29 plants developed mophead inflorescences. Surprisingly, 12 cultivars included diploid as well as triploid plants, while 5 cultivars contained plants with different inflorescence types. We genotyped this germplasm collection using 12 SSR markers that detected 2-7 alleles per marker, and identified 51 different alleles in this collection. We detected 62 distinct fingerprints, revealing a higher genetic variation than the number of cultivars suggested. Only one genotype per cultivar is expected due to the vegetative propagation of Hydrangea cultivars; however we identified 25 cultivars containing 2-4 different genotypes. These different genotypes explained the variation in DNA content and inflorescence type. Diploid and triploid plants with the same cultivar name were exclusively mix-ups. We therefor assume, that 36% of the tested plants were mislabeled. Based on the "Wädenswil" pedigree, which includes 31 of the tested cultivars, we predicted cultivar-specific fingerprints and identified at least 21 out of 31 cultivars by SSR marker-based reconstruction of the "Wädenswil" pedigree. Furthermore, we detected 4 putative interploid crosses between diploid and triploid plants in this pedigree. These interploid crosses resulted in diploid or/and triploid offspring, suggesting that crosses with triploids were successfully applied in breeding of H. macrophylla.

Deciphering the complex nature of bolting time regulation in Beta vulgaris.

KEY MESSAGE: Only few genetic loci are sufficient to increase the variation of bolting time in Beta vulgaris dramatically, regarding vernalization requirement, seasonal bolting time and reproduction type. Beta species show a wide variation of bolting time regarding the year of first reproduction, seasonal bolting time and the number of reproduction cycles. To elucidate the genetics of bolting time control, we used three F3 mapping populations that were produced by crossing a semelparous, annual sugar beet with iteroparous, vernalization-requiring wild beet genotypes. The semelparous plants died after reproduction, whereas iteroparous plants reproduced at least twice. All populations segregated for vernalization requirement, seasonal bolting time and the number of reproduction cycles. We found that vernalization requirement co-segregated with the bolting locus B on chromosome 2 and was inherited independently from semel- or iteroparous reproduction. Furthermore, we found that seasonal bolting time is a highly heritable trait (h 2 > 0.84), which is primarily controlled by two major QTL located on chromosome 4 and 9. Late bolting alleles of both loci act in a partially recessive manner and were identified in both iteroparous pollinators. We observed an additive interaction of both loci for bolting delay. The QTL region on chromosome 4 encompasses the floral promoter gene BvFT2, whereas the QTL on chromosome 9 co-localizes with the BR 1 locus, which controls post-winter bolting resistance. Our findings are applicable for marker-assisted sugar beet breeding regarding early bolting to accelerate generation cycles and late bolting to develop bolting-resistant spring and winter beets. Unexpectedly, one population segregated also for dwarf growth that was found to be controlled by a single locus on chromosome 9.

A Detailed Analysis of the BR1 Locus Suggests a New Mechanism for Bolting after Winter in Sugar Beet (Beta vulgaris L.).

Sugar beet (Beta vulgaris ssp. vulgaris) is a biennial, sucrose-storing plant, which is mainly cultivated as a spring crop and harvested in the vegetative stage before winter. For increasing beet yield, over-winter cultivation would be advantageous. However, bolting is induced after winter and drastically reduces yield. Thus, post-winter bolting control is essential for winter beet cultivation. To identify genetic factors controlling bolting after winter, a F2 population was previously developed by crossing the sugar beet accessions BETA 1773 with reduced bolting tendency and 93161P with complete bolting after winter. For a mapping-by-sequencing analysis, pools of 26 bolting-resistant and 297 bolting F2 plants were used. Thereby, a single continuous homozygous region of 103 kb was co-localized to the previously published BR1 QTL for post-winter bolting resistance (Pfeiffer et al., 2014). The BR1 locus was narrowed down to 11 candidate genes from which a homolog of the Arabidopsis CLEAVAGE AND POLYADENYLATION SPECIFICITY FACTOR 73-I (CPSF73-I) was identified as the most promising candidate. A 2 bp deletion within the BETA 1773 allele of BvCPSF73-Ia results in a truncated protein. However, the null allele of BvCPSF73-Ia might partially be compensated by a second BvCPSF73-Ib gene. This gene is located 954 bp upstream of BvCPSF73-Ia and could be responsible for the incomplete penetrance of the post-winter bolting resistance allele of BETA 1773. This result is an important milestone for breeding winter beets with complete bolting resistance after winter.

Genetic analysis of bolting after winter in sugar beet (Beta vulgaris L.).

KEY MESSAGE: This study reveals for the first time a major QTL for post-winter bolting resistance in sugar beet ( Beta vulgaris L.). The knowledge of this QTL is a major contribution towards the development of a winter sugar beet with controlled bolting behavior. In cool temperate climates, sugar beets are currently grown as a spring crop. They are sown in spring and harvested in autumn. Growing sugar beet as a winter crop with an extended vegetation period fails due to bolting after winter. Bolting after winter might be controlled by accumulating genes for post-winter bolting resistance. Previously, we had observed in field experiments a low post-winter bolting rate of 0.5 for sugar beet accession BETA 1773. This accession was crossed with a biennial sugar beet with regular bolting behavior to develop a F3 mapping population. The population was grown in the greenhouse, exposed to artificial cold treatment for 16 weeks and transplanted to the field. Bolting was recorded twice a week from May until October. Post-winter bolting behavior was assessed by two different factors, bolting delay (determined as days to bolt after cold treatment) and post-winter bolting resistance (bolting rate after winter). For days to bolt, means of F3 families ranged from 25 to 164 days while for bolting rate F3 families ranged from 0 to 1. For each factor one QTL explaining about 65% of the phenotypic variation was mapped to the same region on linkage group 9 with a partially recessive allele increasing bolting delay and post-winter bolting resistance. The results are discussed in relation to the potential use of marker-assisted breeding of winter sugar beets with controlled bolting.

The MdTFL1 gene of apple (Malus x domestica Borkh.) reduces vegetative growth and generation time.

TFL1 is known as a floral repressor in Arabidopsis thaliana (L.) Heynh. In apple there are two TFL1 homologs, MdTFL1-1 and MdTFL1-2. The MdTFL1-1 gene was silenced in transgenic clones expressing a hairpin gene construct of a 323 bp fragment of MdTFL1-1. The hairpin gene construct was transferred to three different apple genotypes. Of 22 transgenic clones, 21 showed a significant reduction in MdTFL1-1 mRNA expression. Precocious flowering was obtained for 20 clones, which flowered already during in vitro cultivation. Nineteen clones could successfully be transferred to the greenhouse where 18 of them flowered within a few weeks followed by the death or at least a strongly inhibited vegetative growth of the plant. Most of the transgenic flowers developed abnormally. Results obtained on greenhouse-grown plants of the transgenic clones and transgenic seedlings clearly demonstrated the major role of MdTFL1 genes in maintaining the vegetative growth as prerequisite for a perennial lifecycle. It was shown that MdTFL1 dsRNAi promotes a life history similar to annual plants. Preliminary results obtained from grafting experiments with non-transgenic scions grafted onto MdTFL1 dsRNAi transgenic rootstocks indicated that the flower-inducing signal obtained after silencing of MdTFL1 genes seems not to be graft-transmissible.

RNA-mediated gene silencing signals are not graft transmissible from the rootstock to the scion in greenhouse-grown apple plants Malus sp.

RNA silencing describes the sequence specific degradation of RNA targets. Silencing is a non-cell autonomous event that is graft transmissible in different plant species. The present study is the first report on systemic acquired dsRNA-mediated gene silencing of transgenic and endogenous gene sequences in a woody plant like apple. Transgenic apple plants overexpressing a hairpin gene construct of the gusA reporter gene were produced. These plants were used as rootstocks and grafted with scions of the gusA overexpressing transgenic apple clone T355. After grafting, we observed a reduction of the gusA gene expression in T355 scions in vitro, but not in T355 scions grown in the greenhouse. Similar results were obtained after silencing of the endogenous Mdans gene in apple that is responsible for anthocyanin biosynthesis. Subsequently, we performed grafting experiments with Mdans silenced rootstocks and red leaf scions of TNR31-35 in order to evaluate graft transmitted silencing of the endogenous Mdans. The results obtained suggested a graft transmission of silencing signals in in vitro shoots. In contrast, no graft transmission of dsRNA-mediated gene silencing signals was detectable in greenhouse-grown plants and in plants grown in an insect protection tent.

Over-expression of an FT-homologous gene of apple induces early flowering in annual and perennial plants.

The protein encoded by the FLOWERING LOCUS T (FT) gene from Arabidopsis thaliana seems to be the long-searched florigen, and over-expression of FT orthologues resulted in accelerated flower development in annual and perennial plants. In the present study, we isolated two allelic mRNA sequences of an FT-homologous gene from apple, which was designated as MdFT1. Using a SSR motif this gene was mapped on LG 12 of apple. Over-expression of MdFT1 in Arabidopsis and the commercially important tree species poplar and apple itself using the CaMV 35S or the Arabidopsis Suc2 promoter resulted in significant accelerated flowering compared with wild-type plants. Transgenic T(0) plants of Arabidopsis flowered 4-6 days on average earlier than wild-type Arabidopsis under LD conditions. Under short-day conditions Suc2::MdFT1 plants of the T(1)-generation flowered after 66 ± 18 days, while wild-type plants flowered about 22 days later. All transgenic Arabidopsis plants showed a normal habit except for the early flowering phenotype. Early flowering was detected 6-10 months after transformation in transgenic polar clones containing MdFT1 driven by the CaMV 35S, whereas plants of the transgenic apple clone T780 set up its first flowers during in vitro cultivation. Based on our results we conclude that MdFT1 is responsible for inducing flowering and that the function of the apple FT1 gene is conserved in annual herbaceous species as well as perennial woody species. Furthermore, we discuss the role of MdFT1 in flower development with regard to the findings of genetic studies on apple.